5962-8771601EB datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Analog mixed-signal IC> The signal circuit> 5962-8771601EB

5962-8771601EB: DescriptionSingle-Ended Multiplexer, 1 Func, 8 Channel, BIPolar, CDIP16, CERAMIC, DIP-16; CategoryAnalog mixed-signal IC The signal circuit; File Size113KB，13 Pages; ManufacturerADI; Websitehttps://www.analog.com

Download Datasheet Parametric Compare View All

5962-8771601EB Overview

Single-Ended Multiplexer, 1 Func, 8 Channel, BIPolar, CDIP16, CERAMIC, DIP-16

5962-8771601EB Parametric

Parameter Name	Attribute value
Objectid	1516135423
package instruction	CERAMIC, DIP-16
Reach Compliance Code	unknown
Other features	OVERVOLTAGE PROTECTION
Analog Integrated Circuits - Other Types	SINGLE-ENDED MULTIPLEXER
JESD-30 code	R-GDIP-T16
JESD-609 code	e0
length	19.05 mm
Nominal Negative Supply Voltage (Vsup)	-15 V
Number of channels	8
Number of functions	1
Number of terminals	16
Nominal off-state isolation	60 dB
On-state resistance matching specifications	45 Ω
Maximum on-state resistance (Ron)	300 Ω
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package body material	CERAMIC, GLASS-SEALED
encapsulated code	DIP
Package shape	RECTANGULAR
Package form	IN-LINE
Peak Reflow Temperature (Celsius)	NOT SPECIFIED
Certification status	Not Qualified
Filter level	MIL-STD-883
Maximum seat height	5.08 mm
Nominal supply voltage (Vsup)	15 V
surface mount	NO
Maximum disconnect time	400 ns
Maximum connection time	2000 ns
technology	BIPOLAR
Temperature level	MILITARY
Terminal surface	TIN LEAD
Terminal form	THROUGH-HOLE
Terminal pitch	2.54 mm
Terminal location	DUAL
Maximum time at peak reflow temperature	NOT SPECIFIED
width	7.62 mm

Preview

Download Datasheet

View All

REVISIONS

LTR

DESCRIPTION

Drawing updated to reflect current requirements. Editorial changes throughout.

– drw

DATE (YR-MO-DA)

00-12-13

APPROVED

Raymond Monnin

The original first page of this drawing has been replaced.

REV

SHEET

REV

SHEET

REV STATUS

OF SHEETS

PMIC N/A

REV

SHEET

PREPARED BY

Marcia B. Kelleher

STANDARD

MICROCIRCUIT

DRAWING

THIS DRAWING IS AVAILABLE

FOR USE BY ALL

DEPARTMENTS

AND AGENCIES OF THE

DEPARTMENT OF DEFENSE

CHECKED BY

Wm. J. Johnson

APPROVED BY

Michael A. Frye

DRAWING APPROVAL DATE

88-12-08

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43216

http://www.dscc.dla.mil

MICROCIRCUIT, LINEAR, 8-CHANNEL, JFET

ANALOG MULTIPLEXER, MONOLITHIC SILICON

AMSC N/A

REVISION LEVEL

SIZE

SHEET

CAGE CODE

67268

1 OF

5962-87716

DSCC FORM 2233

APR 97

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

5962-E112-01

2. APPLICABLE DOCUMENTS

2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a

part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed

in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in

the solicitation.

SPECIFICATION

DEPARTMENT OF DEFENSE

MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for.

STANDARDS

DEPARTMENT OF DEFENSE

MIL-STD-883 -

MIL-STD-1835 -

HANDBOOKS

DEPARTMENT OF DEFENSE

MIL-HDBK-103 -

MIL-HDBK-780 -

List of Standard Microcircuit Drawings.

Standard Microcircuit Drawings.

Test Method Standard Microcircuits.

Interface Standard Electronic Component Case Outlines.

(Unless otherwise indicated, copies of the specification, standards, and handbooks are available from the Standardization

Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text

of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a

specific exemption has been obtained.

3. REQUIREMENTS

3.1 Item requirements. The individual item requirements shall be in accordance with MIL-PRF-38535, appendix A for non-

JAN class level B devices and as specified herein. Product built to this drawing that is produced by a Qualified Manufacturer

Listing (QML) certified and qualified manufacturer or a manufacturer who has been granted transitional certification to MIL-

PRF-38535 may be processed as QML product in accordance with the manufacturers approved program plan and qualifying

activity approval in accordance with MIL-PRF-38535. This QML flow as documented in the Quality Management (QM) plan

may make modifications to the requirements herein. These modifications shall not affect form, fit, or function of the device.

These modifications shall not affect the PIN as described herein. A "Q" or "QML" certification mark in accordance with MIL-

PRF-38535 is required to identify when the QML flow option is used.

3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as

specified in MIL-PRF-38535, appendix A and herein.

3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.2 herein.

3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1.

3.2.3 Truth table. The truth table shall be as specified on figure 2.

3.2.4 Logic diagram. The logic diagram shall be as specified on figure 3.

3.2.5 Switching time waveforms. The switching time waveforms shall be as specified on figure 7.

STANDARD

MICROCIRCUIT DRAWING

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43216-5000

DSCC FORM 2234

APR 97

SIZE

REVISION LEVEL

5962-87716

SHEET

5962-8771601EB Related Products

	5962-8771601EB
Description	Single-Ended Multiplexer, 1 Func, 8 Channel, BIPolar, CDIP16, CERAMIC, DIP-16
Objectid	1516135423
package instruction	CERAMIC, DIP-16
Reach Compliance Code	unknown
Other features	OVERVOLTAGE PROTECTION
Analog Integrated Circuits - Other Types	SINGLE-ENDED MULTIPLEXER
JESD-30 code	R-GDIP-T16
JESD-609 code	e0
length	19.05 mm
Nominal Negative Supply Voltage (Vsup)	-15 V
Number of channels	8
Number of functions	1
Number of terminals	16
Nominal off-state isolation	60 dB
On-state resistance matching specifications	45 Ω
Maximum on-state resistance (Ron)	300 Ω
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package body material	CERAMIC, GLASS-SEALED
encapsulated code	DIP
Package shape	RECTANGULAR
Package form	IN-LINE
Peak Reflow Temperature (Celsius)	NOT SPECIFIED
Certification status	Not Qualified
Filter level	MIL-STD-883
Maximum seat height	5.08 mm
Nominal supply voltage (Vsup)	15 V
surface mount	NO
Maximum disconnect time	400 ns
Maximum connection time	2000 ns
technology	BIPOLAR
Temperature level	MILITARY
Terminal surface	TIN LEAD
Terminal form	THROUGH-HOLE
Terminal pitch	2.54 mm
Terminal location	DUAL
Maximum time at peak reflow temperature	NOT SPECIFIED
width	7.62 mm

Recommended Resources

Incandescent lamp soft start circuit

Mobile automatic insertion circuit

Use fluorescent lamp starter to make household appliance indicator light

High fidelity BTL amplifier circuit

New low distortion sine wave oscillation circuit

Computer motherboard circuit diagram 820 1_36

Help burning 2812 flash: I want to know how to burn the flash of 2812. If anyone knows, please give me some advice....; zhaoyunkai Microcontroller MCU

[RTT & Renesas high performance CPK-RA6M4] 5. Software simulation I2C drive OLED evaluation: 1. Hardware 1. Pin resources Since pure software simulation is used, there are no special requirements for the pins, so the connection method of the previous evaluation project is still used. [RTTRene...; kit7828 Renesas Electronics MCUs

[Help Post] Is the download link for the RSL10-002GEVB pack on ON Semiconductor's official website wrong?: After installing the IDE downloaded from the ON Semiconductor official website, and installing the pack specified for RSL10-002GEVB on the official website, why is the RSL10-002GEVB board still not di...; yilonglucky onsemi and Avnet IoT Innovation Design Competition

The system stops at FMD::FMD_Init, please help!: : Recently I'm working on the problem of using the remaining FLASH on S3C2410 for permanent storage. My PB is CE4.2. The workflow is as follows. First, put the HIVE reward when planting the kernel, an...; knight0101 Embedded System

Common sense of safe use of electricity (I): 1. Why must the lighting switch be connected to the live wire? If the lighting switch is installed on the neutral wire, although the light will not turn on when it is disconnected, the phase line of t...; jek9528 Industrial Control Electronics

You can participate by posting a thread to talk about technology! EEWorld has prizes every month, if you have information, I will give you a prize~: The way to participate is simple, and you have the chance to win a prize every month. Just come to the forum to post and talk about technology, whether it is sharing original articles, helping others ...; okhxyyo Talking

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components