ATC GENERAL PURPOSE CAPACITORS: NPO (COG) DIELECTRIC
ELECTRICAL CHARACTERISTICS
CAPACITANCE RANGE:
0.5 pF to 0.10 µF.
TEMPERATURE CHARACTERISTIC:
0 ± 30ppm/°C.
L
W
OPERATING TEMPERATURE RANGE:
-55°C to +125°C.
DISSIPATION FACTOR:
0.1% (max.) @ + 25°C,
@1 MHz
≤
1000 pF; @1 KHz >1000 pF
INSULATION RESISTANCE
@ + 25°C and rated Vdc:
100,000 megohms (min.) or 1000 ohm-farads (min.),
whichever is less.
DIELECTRIC WITHSTANDING VOLTAGE:
250% of rated voltage for 5 ± 1 seconds, 50 milliamps (max.).
Unless otherwise specified all test data is at + 25°C.
T (MAX.)
MB
Temperature Coefficient
Aging Rate
Voltage Coefficient of Capacitance
Temperature (Celsius)
Impedance vs. Frequency
Dissipation Factor vs. Frequency
Minimum IR vs. Temperature
Temperature (Celsius)
Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale(ATC document #001-992 Rev. A 10/03). Copies of
these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and
Conditions of Sale.
ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which
may result from its use. ATC reserves the right to revise the content or modify its product without prior notice.
"One billion people, nine hundred million merchants, and one hundred million are waiting and watching!" Zheng Zhihua's lyrics that sound exaggerated may really become a reality in the online world. Op...
[b]Table of Contents:[/b] Chapter 1 Basic Knowledge of Digital Circuits and Digital Integrated Circuits 1.1 Introduction to Digital Signals and Digital Circuits 1.1.1 Analog Signals and Analog Circuit...
[align=left][font=等线][color=#000000]The MKW41Z_ConnSw_1.0.2 development kit provided by NXP provides two Wireless UART sample programs: one is based on the BLE protocol and the other is based on the S...
In multi-axle drive vehicles, a transfer case is provided to distribute the output power to each drive axle. The transfer case is generally provided with high and low gears to further expand the trans...
I am also a novice beginner, so I will write an article about how I learned.The experts took a detour and just accepted some simple things, and finally came to the summary of the problem through their...
Talking
京公网安备 11010802033920号
EEWORLD
