BU-64703G8-700Y datasheet, PDF

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> BU-64703G8-700Y

BU-64703G8-700Y: DescriptionMil-Std-1553 Controller, 2 Channel(s), 0.125MBps, CMOS, CQFP80, 0.88 X 0.88 INCH, 0.130 INCH HEIGHT, CERAMIC, QFP-80; CategoryThe embedded processor and controller Microcontrollers and processors; File Size1MB，50 Pages; ManufacturerData Device Corporation

Download Datasheet Parametric View All

BU-64703G8-700Y Overview

Mil-Std-1553 Controller, 2 Channel(s), 0.125MBps, CMOS, CQFP80, 0.88 X 0.88 INCH, 0.130 INCH HEIGHT, CERAMIC, QFP-80

BU-64703G8-700Y Parametric

Parameter Name	Attribute value
Objectid	1329702596
package instruction	QFP,
Reach Compliance Code	compliant
Other features	ALSO OPERATES AT 3.3V LOGIC POWER
boundary scan	NO
letter of agreement	MIL-STD-1553A; MIL-STD-1553B; STANAG-3838
Data encoding/decoding methods	BIPH-LEVEL(MANCHESTER)
Maximum data transfer rate	0.125 MBps
External data bus width	16
JESD-30 code	S-CQFP-G80
JESD-609 code	e0
length	22.35 mm
low power mode	YES
Number of serial I/Os	2
Number of terminals	80
Package body material	CERAMIC, METAL-SEALED COFIRED
encapsulated code	QFP
Package shape	SQUARE
Package form	FLATPACK
Maximum seat height	3.302 mm
Maximum supply voltage	3.46 V
Minimum supply voltage	3.14 V
Nominal supply voltage	3.3 V
surface mount	YES
technology	CMOS
Terminal surface	TIN LEAD
Terminal form	GULL WING
Terminal pitch	1.016 mm
Terminal location	QUAD
width	22.35 mm
uPs/uCs/peripheral integrated circuit type	SERIAL IO/COMMUNICATION CONTROLLER, MIL-STD-1553

Preview

Download Datasheet

View All

BU-64703

Make sure the next

Card you purchase

has...

SIMPLE SYSTEM RT MARK3

(SSRT MARK3)

FEATURES

•

Complete Integrated Remote Terminal

Including:

•Dual Low-Power 3.3V or 5.0V

Transceivers

•Complete RT Protocol Logic

•

Supports MIL-STD-1553A/B Notice 2,

STANAG-3838 RT, and

MIL-STD-1760 Stores Management

•

World’s Smallest CQFP SSRT

•

80-Pin Ceramic Flat Pack or Gull Wing

Package

DESCRIPTION

The BU-64703 Simple System RT Mark3 (SSRT Mark3) MIL-

STD-1553 terminal provides a complete interface between a simple

system and a MIL-STD-1553 bus. The SSRT Mark3 can be powered

entirely by 3.3 volts, thus eliminating the need for a 5V power supply.

This terminal integrates dual transceiver, protocol logic, and a FIFO

memory for received messages in an extremely small, 0.88 inch

square 0.130” max height ceramic package. The gull wing package

with a “toe-to-toe” maximum dimension of 1.110 inches enables its

use in applications where PC board space is at a premium. The

SSRT Mark3 provides multi-protocol support of MIL-STD-1553A/B,

MIL-STD-1760, McAir, and STANAG-3838.

The SSRT Mark3's transceivers are completely monolithic, require

only a +3.3V supply (+5.0V available), and consume low power. The

internal architecture is identical to that of the original BU-61703/61705

Simple System RT (SSRT). There are versions of the Simple System

RT Mark3 available with transceivers trimmed for MIL-STD-1760

compliance, or compatible to McAir standards. The SSRT Mark3 can

operate with a choice of clock frequencies at 10, 12, 16, or 20 MHz.

The SSRT Mark3 incorporates a Built-In-Test (BIT). This BIT, which is

processed following power turn-on or after receipt of an Initiate Self-

Test Mode command, provides a comprehensive test of the SSRT

Mark3's encoders, decoders, protocol, transmitter watchdog timer,

and protocol section. The SSRT Mark3 also includes an auto-config-

uration feature.

The SSRT Mark3 is ideal for stores and other simple systems that do

not require a microprocessor. To streamline the interface to simple

systems, the SSRT Mark3 includes an internal 32-word FIFO for

received data words. This serves to ensure that only complete, con-

sistent blocks of validated data words are transferred to a system.

•

3.3V Logic Power

•

Meets 1553A/McAir Response Time

Requirements

•

Internal FIFO for Burst Mode Capability on

Receive Data

•

16-bit DMA Interface

•

Auto Configuration Capability

•

Comprehensive Built-In Self-Test

•

Direct Interface to Simple (Processorless)

Systems

•

Available with Full Military Temperature

Range and Screening

•

Selectable Input Clock:

10, 12, 16, or 20 MHz

FOR MORE INFORMATION CONTACT:

Technical Support:

1-800-DDC-5757 ext. 7771

Data Device Corporation

105 Wilbur Place

Bohemia, New York 11716

631-567-5600 Fax: 631-567-7358

www.ddc-web.com

2003 Data Device Corporation

Recommended Resources

Conventional lighting control circuit

Model A5347 Smoke Detector - Block Diagram

144MHz signal circuit of VSWR bridge

Pressure sensor two-wire transmission circuit

Anti-theft alarm doorbell circuit diagram

Automatic night lighting circuit using bidirectional thyristor

How to connect the power protection circuit: The controller uses 24V and 5V switching power supplies. In order to prevent users from mistakenly connecting 24V to 5V, how to add a protection circuit? Can it be achieved by adding a 5.1V voltage re...; 桂花蒸 Analog electronics

Design and production of power supply protection circuit system: In order to facilitate various circuit experiments in the laboratory, the laboratory power supply system should have the following functions: DC regulated voltage source with fixed output voltages of ...; fish001 Analogue and Mixed Signal

Main features of DC power distribution system 　: Main features of 　 DC power distribution system The advanced module design of 　 the rack -embedded DC power system makes the entire system very small, but it can provide enough power to meet the requi...; czf0408 Power technology

NE568AN No demodulated signal output: [i=s] This post was last edited by dontium on 2015-1-23 12:50 [/i] Hello everyone! I need help with the FM demodulation problem of NE568AN: 1. FM modulation parameters are as follows: center frequency...; jys031006 Analogue and Mixed Signal

Send a copy of the Chinese information of CC1100: Chinese documentation for CC1100...; fskjhm DIY/Open Source Hardware

TCPMP does not display the playback interface: My code is as follows. There is no playback interface on my monitor, only sound. Please give me some advice if(Context_Init((tchar_t *)_T("TCPMP"),(tchar_t *)_T("0.72RC1"),3,(tchar_t*)AfxGetApp()->m_l...; hzlyj999 Embedded System

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components