CMOS Crystal Oscillator
Previous Vectron Model VCC4
VC-801
VC-801
Description
Vectron’s VC-801 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The VC-801 uses
fundamental or 3rd overtone crystals resulting in very low jitter performance, and a monolithic IC which improves reliability and
reduces cost.
Features
•
•
•
•
•
CMOS output XO
Output Frequencies from 32.768kHz to 125.000MHz
5.0, 3.3, 2.5 or 1.8 V Operation
Low Jitter Performance
Output Disable Feature
• ±
20ppm Frequency Stability Available
• Operating Temperature ranging from -55°C to +125°C
• Small Industry Standard Package, 3.2 x 5.0 x 1.3mm
• Product is compliant to RoHS directive
and fully compatible with lead free assembly
•
•
•
•
•
•
•
Applications
SONET/SDH/DWDM
Ethernet, GE, SynchE
Storage Area Networking
Fiber Channel
Digital Video
Broadband Access
Base Stations, Picocells
Block Diagram
V
DD
Output
Crystal
Oscillator
E/D
Page1
GND
Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Specifications
Performance Specifications
Table 1. Electrical Performance, 5V Option
Parameter
Voltage
1
Max Voltage
Current
2
≤20.000MHz
20.001 to 50.000MHz
50.001 to 75.000MHz
Current, Output Disabled
Frequency
Nominal Frequency
3
Stability
4,8
(Ordering Option)
Output Logic Levels
2
Output Logic High
Output Logic Low
Output Logic High Drive
Output Logic Low Drive
Load
Output Rise /Fall Time
2
<20.000MHz
20.000 to 50.000MHz
50.001 to 75.000MHz
Output Leakage, Output Disabled
Duty Cycle
2,5
Period Jitter
6
RMS
Peak-Peak
RMS Jitter, 12kHz-20MHz
Output Enable/Disable
7
Output Enable
Output Disable
Disable time
Enable Internal Pull-Up Resistor
Start-Up Time
Operating Temp (Ordering Option)
1]
2]
3]
4]
5]
6]
7]
8]
Symbol
V
DD
I
DD
Min
4.5
-0.7
Typical
Supply Voltage
5.0
Max
5.5
7
10
30
40
30
Units
V
V
mA
mA
mA
uA
MHz
ppm
f
N
1.544
±20, ±25, ±32, ±50, ±100
Output
75.000
V
OH
V
OL
I
OH
I
OL
t
R
/t
F
0.9*V
DD
16
16
0.1*V
DD
V
V
mA
mA
pF
ns
ns
ns
uA
%
ps
ps
15
8
5
2
±10
45
фJ
50
3.0
21
0.5
Enable/Disable
V
IH
V
IL
t
D
100
t
SU
T
OP
8
-10/70, -20/70, -40/85, -40/105, -40/125, -55/105, -55/125
4.0
1
55
I
Z
фJ
ps
0.8
100
V
V
ns
Kohm
ms
°C
The power supply should have by-pass capacitors as close to the supply and to ground as possible, for example 0.1 and 0.01uF.
Parameters are tested with the test circuit shown in Fig 1.
See Standard Frequencies and Ordering Information tables for more specific information.
Includes initial accuracy, operating temperature, supply voltage, shock and vibration (not under operation) and aging for
±
50 and
±
100ppm options.
Duty Cycle is measured as On Time/Period, see Fig 2.
Broadband Period Jitter measured using Wavecrest SIA3300C, 90K samples, see Application Note for Typical Phase Noise and Jitter Performance.
The Output is Enabled if the Enable/Disable is left open.
Only ±50 and ±100 stability option available for -40/105 °C, -40/125 °C, -55/105 °C and -55/125 °C Operating temperature range.
I
DD
+
4
.1µF
.01µF
1
+
3
2
15pF
t
R
V
OH
50%
V
OL
On Time
Period
Fig 1: Test Circuit
Fig 2: Waveform
Page2
t
F
V
DD
Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Specifications
Performance Specifications
Table 2. Electrical Performance, 3.3V Option
Parameter
Voltage
1
Max Voltage
Current
2
32.768kHz to 1.499MHz
1.500 to 20.000 MHz
20.001 to 50.000MHz
50.001 to 100.000MHz
100.001 to 125.000MHz
Current, Output Disabled
Frequency
Nominal Frequency
3
Stability
4,8
(Ordering Option)
Output Logic Levels
2
Output Logic High
Output Logic Low
Output Logic High Drive
Output Logic Low Drive
Load
Output Rise /Fall Time
2
32.768kHz to 345.6kHz
345.6kHz to 20.000MHz
20.001 to 50.000MHz
50.001 to 75.000MHz
75.001 to 125.000MHz
Output Leakage, Output Disabled
Duty Cycle
2,5
Period Jitter
6
RMS
Peak-Peak
RMS Jitter, 12kHz-20MHz
Output Enable/Disable
7
Output Enable
Output Disable
Disable time
Enable Internal Pull-Up Resistor
Start-Up Time
Operating Temp (Ordering Option)
1]
2]
3]
4]
5]
6]
7]
8]
Symbol
V
DD
I
DD
Min
2.97
-0.5
Typical
Supply Voltage
3.30
Max
3.63
5.0
5
7
20
30
40
30
Units
V
V
mA
mA
mA
mA
mA
uA
MHz
ppm
f
N
0.032
±20, ±25, ±32, ±50, ±100
Output
125.000
V
OH
V
OL
I
OH
I
OL
t
R
/t
F
0.9*V
DD
8
8
0.1*V
DD
V
V
mA
mA
pF
ns
ns
ns
ns
ns
uA
%
ps
ps
15
200
6
4
3
2
±10
45
фJ
50
3.0
21
0.5
Enable/Disable
V
IH
V
IL
t
D
100
t
SU
T
OP
8
-10/70, -20/70, -40/85, -40/105, -40/125, -55/105, -55/125
2.0
1
55
I
Z
фJ
ps
0.5
100
V
V
ns
Kohm
ms
°C
The power supply should have by-pass capacitors as close to the supply and to ground as possible, for example 0.1 and 0.01uF.
Parameters are tested with the test circuit shown in Fig 1.
See Standard Frequencies and Ordering Information tables for more specific information.
Includes initial accuracy, operating temperature, supply voltage, shock and vibration (not under operation) and aging for
±
50 and
±
100ppm options.
Duty Cycle is measured as On Time/Period, see Fig 2.
Broadband Period Jitter measured using Wavecrest SIA3300C, 90K samples, see Application Note for Typical Phase Noise and Jitter Performance.
The Output is Enabled if the Enable/Disable is left open.
Only ±50 and ±100 stability option available for -40/105 °C, -40/125 °C, -55/105 °C and -55/125 °C Operating temperature range.
Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page3
Specifications
Performance Specifications
Table 3. Electrical Performance, 2.5V Option
Parameter
Voltage
1
Max Voltage
Current
2
32.768kHz to 1.499MHz
1.500 to 20.000 MHz
20.001 to 50.000MHz
50.001 to 75.000MHz
75.001 to 100.000MHz
100.001 to 125.000MHz
Current, Output Disabled
Frequency
Nominal Frequency
3
Stability
4,9
(Ordering Option)
Output Logic Levels
2
Output Logic High
Output Logic Low
Output Logic High Drive
Output Logic Low Drive
Output Logic High Drive
8
Output Logic Low Drive
8
Load
Output Rise /Fall Time
2
32.768kHz to 345.6kHz
345.6kHz to 20.000MHz
20.001 to 50.000MHz
50.001 to 75.000MHz
75.001 to 125.000MHz
Output Leakage, Output Disabled
Duty Cycle
2,5
Period Jitter
6
RMS
Peak-Peak
RMS Jitter, 12kHz-20MHz
Output Enable/Disable
7
Output Enable
Output Disable
Disable time
Enable Internal Pull-Up Resistor
Start-Up Time
Operating Temp (Ordering Option)
1]
2]
3]
4]
5]
6]
7]
8]
9]
Symbol
V
DD
I
DD
Min
2.25
-0.5
Typical
Supply Voltage
2.50
Max
2.75
5.0
5
7
15
20
25
30
30
Units
V
V
mA
mA
mA
mA
mA
mA
uA
MHz
ppm
f
N
0.032
±20, ±25, ±32, ±50, ±100
Output
125.000
V
OH
V
OL
I
OH
I
OL
I
OH
I
OL
I
OUT
t
R
/t
F
0.9*V
DD
4
4
8
8
0.1*V
DD
V
V
mA
mA
mA
mA
pF
ns
ns
ns
ns
ns
uA
%
ps
ps
15
200
6
5
3
2
±10
45
50
3.0
21
0.5
Enable/Disable
1
55
I
Z
фJ
фJ
ps
V
IH
V
IL
t
D
1.75
0.5
100
100
8
V
V
ns
Kohm
ms
°C
t
SU
T
OP
-10/70, -20/70, -40/85, -40/105, -40/125, -55/105, -55/125
The power supply should have by-pass capacitors as close to the supply and to ground as possible, for example 0.1 and 0.01uF.
Parameters are tested with the test circuit shown in Fig 1.
See Standard Frequencies and Ordering Information tables for more specific information.
Includes initial accuracy, operating temperature, supply voltage, shock and vibration (not under operation) and aging for
±
50 and
±
100ppm options.
Duty Cycle is measured as On Time/Period, see Fig 2.
Broadband Period Jitter measured using Wavecrest SIA3300C, 90K samples, see Application Note for Typical Phase Noise and Jitter Performance.
The Output is Enabled if the Enable/Disable is left open.
For 3rd overtone crystal designs.
Only ±50 and ±100 stability option available for -40/105 °C, -40/125 °C, -55/105 °C and -55/125 °C Operating temperature range.
Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page4
Performance Specifications
Table 4. Electrical Performance, 1.8V Option
Parameter
Voltage
1
Max Voltage
Current
2
1.544 to 20.000 MHz
20.001 to 70.000MHz
70.001 to 100.000MHz
100.001 to 125.000MHz
Current, Output Disabled
Frequency
Nominal Frequency
3
Stability
4,9
(Ordering Option)
Output Logic Levels
2
Output Logic High
Output Logic Low
Output Logic High Drive
Output Logic Low Drive
Output Logic High Drive
8
Output Logic Low Drive
8
Load
Output Rise /Fall Time
2
1.544 to 20.000MHz
20.001 to 50.000MHz
50.001 to 125.000MHz
Output Leakage, Output Disabled
Duty Cycle
2,5
Period Jitter
6
RMS
Peak-Peak
RMS Jitter, 12kHz-20MHz
Output Enable/Disable
7
Output Enable
Output Disable
Disable time
Enable Internal Pull-Up Resistor
Start-Up Time
Operating Temp (Ordering Option)
1]
2]
3]
4]
5]
6]
7]
8]
9]
Symbol
V
DD
I
DD
Min
1.71
-0.5
Typical
Supply Voltage
1.80
Max
1.89
3.6
5
15
20
25
30
Units
V
V
mA
mA
mA
mA
uA
MHz
ppm
f
N
1.544
±20, ±25, ±32, ±50, ±100
Output
125.000
V
OH
V
OL
I
OH
I
OL
I
OH
I
OL
t
R
/t
F
0.9*V
DD
2.8
2.8
8
8
0.1*V
DD
V
V
mA
mA
mA
mA
pF
ns
ns
ns
uA
%
ps
ps
15
6
5
3
±10
45
фJ
50
3.0
21
0.5
Enable/Disable
V
IH
V
IL
t
D
1
t
SU
T
OP
8
-10/70, -20/70, -40/85, -40/105, -40/125, -55/105, -55/125
1.26
1
55
I
Z
фJ
ps
0.5
100
V
V
ns
Mohm
ms
°C
The power supply should have by-pass capacitors as close to the supply and to ground as possible, for example 0.1 and 0.01uF.
Parameters are tested with the test circuit shown in Fig 1.
See Standard Frequencies and Ordering Information tables for more specific information.
Includes initial accuracy, operating temperature, supply voltage, shock and vibration (not under operation) and aging for
±
50 and
±
100ppm options.
Duty Cycle is measured as On Time/Period, see Fig 2.
Broadband Period Jitter measured using Wavecrest SIA3300C, 90K samples, see Application Note for Typical Phase Noise and Jitter Performance.
The Output is Enabled if the Enable/Disable is left open.
For 3rd overtone crystal designs.
Only ±50 and ±100 stability option available for -40/105 °C, -40/125 °C, -55/105 °C and -55/125 °C Operating temperature range.
Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page5
京公网安备 11010802033920号
EEWORLD
