K4
SNAP-IN
TOGGLES
SEALED, ILLUMINATED SNAP-IN TOGGLE
LOW COST, SNAP-IN TOGGLE FOR WET & DUSTY ENVIRONMENTS, 1 & 2 POLES
The K4 series snap-in toggle switches are rugged, high
performance sealed switches designed for use under severe
conditions found in marine, appliance, heavy equipment and
industrial control applications. They are totally sealed so the
switch can withstand direct water spray and submersion,
even during operation. Sealed to IP68S with an optional panel
seal available.
The K4 series is offered in single and double pole configurations.
Toggle action includes 2 and 3-position, momentary and
maintained operation in a combination of 13 variations.
Mounting is simple and quick; snaps into panel from the
front. The OTTO snap-in design supports a variety of panel
thicknesses with just one cutout size specified.
Existing unsealed applications are easily upgraded to
sealed functionality because the K series drops into existing
panel cutouts.
A choice of models are offered to handle current from 16 amps to
low level electronic switching levels.
Single & Double Pole
LED, Neon or
Incandescent Illumination
Features:
• Withstands direct water spray
• Sealed to IP68S
• Fits industry standard panel openings for drop-in
replacement of panel sealed & unsealed switches
• Snap-in feature accommodates a wide range of
panel cutouts
• Switches up to 16 amps
• UV & solvent resistant
• Withstands extreme shock & vibration
• Legends & illuminated function indicators available
• 2 & 3-position, momentary, maintained action
& center OFF
• RoHS/WEEE/Reach compliant
Standard Characteristics/Ratings:
ELECTRICAL RATINGS:
Load
Resistive
Resistive
Inductive
Lamp
Motor
DWV
Low Level
Electrical Life:
Sea Level @ 28VDC
or 125/250VAC, 60Hz
16A
10A
10A
5A
0.5HP
10mA @ 30mV
See Rating Chart
Cycles
25,000
50,000
25,000
25,000
25,000
100,000
1050Vrms except across light terminals
LIGHTING:
Light Source
Incandescent
Neon
LED
Mechanical Life:
Seal:
Rating
(VDC) 6V, 12V, 24V
(VAC) 125V, 250V
(VDC) 2V, 6V, 12V, 24V
100,000 cycles
IP68S
Operating Temp Range:
-30°C to +85°C
MATERIALS:
Case:
Toggle:
Terminals/Contact:
Terminal Hardware:
Thermoplastic
Stainless steel
Brass, silver alloy with silver plate, gold plate for low level
Screws and lockwashers provided when applicable
K4 series recommended Quick Connect terminals:
AMP 60253-2 for 12-16 AWG
AMP 42100-2 for 14-18 AWG
None provided
Mounting Hardware:
156
OTTO Full Line Catalog
Specifications Subject To Change Without Notice
SEALED, ILLUMINATED SNAP-IN TOGGLE
LOW COST, SNAP-IN TOGGLE FOR WET & DUSTY ENVIRONMENTS, 1 & 2 POLES
28° 4
14°
.94
.24
SNAP-IN
TOGGLES
K4
ROCKER SWITCHES
1.06
.98
SIDE "A"
SIDE "C"
1.45
.40
1.25
.86
SWITCH SHOWN IN "B" POSITION
TERMINAL STYLES (.032 THICK)
SCREW
QUICK CONNECT
SOLDER
#6-32 THD
.08
.11
MOUNTING OPENING: J
PANEL THICKNESS RANGE OF .025 - .105 A GASKET IS RECOMMENDED
PANEL THICKNESS RANGE OF .105 - .187 W/O GASKET
PANEL OPENING: MIN.
TYP.
MAX.
WIDTH
.870
.937
1.000
1.072
LENGTH 1.072 1.099
1.125
J
MIN.
REFERENCE
PANEL
CUT-OUT
.25
.25
.25
1.000
MAX.
.870 MIN.
1.125 MAX.
K4 SERIES PART NUMBER CODE
K4
Terminal Style/
Switch Rating
A.
Quick Connect/
Standard
B.
Screw/Standard
C.
Solder/Standard
D.
Quick Connect/
Low Level
E.
Screw/Low Level
F.
Solder/Low Level
X
Actuator
Style
A.
Bat
Handle
A.
B.
C.
D.
E.
F.
G.
H.
J.
K.
L.
M.
N.
P.
X
Position
“A”
X
Switch Action/Circuit
Position Position
“B”
“C”
Circuit
X
Light Type
A.
No Light
B.
6V Incandescent
C.
12V Incandescent
D.
24V Incandescent
E.
125VAC Neon
F.
250VAC Neon
G.
2V Red LED
H.
2V Green LED
J.
2V Amber LED
K.
6V Red LED
L.
6V Green LED
M.
6V Amber LED
N.
12V Red LED
P.
12V Green LED
Q.
12V Amber LED
R.
24V Red LED
S.
24V Green LED
T.
24V Amber LED
X
X
X
X
Legend & Orientation
¿
A.
No Legend
G.
Dependent Light
ON in position “A”
Wired to terms
1
& 7
Independent Light
at position “C”
Wired to terms 7 &
8
Lens Color
Position
“A”
A.
No Lens
B.
Red
C.
Green
D.
Amber
E.
Clear
Position
“B”
A.
No Lens
B.
Red
C.
Green
D.
Amber
E.
Clear
Light/Circuit Location
A.
No Light
B.
Dependent Light
ON in position “A”
Wired to terms
1
& 7
NOTE: Contact factory for panel
recommendations on switches
with potting cups.
1-C1
1-C1
(1-C1)
(1-C1)
(1-C1)
1-C1
(1-C1)
1-C1/3-C2
1-C1/3-C2
(1-C1)/(3-C2)
(1-C1)/(3-C2)
(1-C1)/(3-C2)
1-C1/3-C2
(1-C1)/(3-C2)
NONE
OFF
SPST
NONE
2-C1
SPDT
NONE
OFF
SPST
NONE
2-C1
SPDT
OFF
(2-C1)
SPDT
OFF
2-C1
SPDT
OFF
2-C1
SPDT
NONE
OFF
DPST
NONE 2-C1/4-C2 DPDT
NONE
OFF
DPST
NONE 2-C1/4-C2 DPDT
OFF (2-C1)/(4-C2) DPDT
OFF
2-C1/4-C2 DPDT
OFF
2-C1/4-C2 DPDT
B.
C.
C.
Dependent Light
ON in position “C”
Wired to terms
2
& 8
D.
E.
H.
F.
Independent Light
at position “A”
Wired to terms
7
& 8
Dependent Light
ON in position “C”
Wired to terms
2
& 8
G.
D.
Independent Light
at position “A”
Wired to terms 7 &
8
H.
J.
NOTE: ( ) denotes momentary action.
E.
Independent Light
at position “C”
Wired to terms 7 &
8
J.
K.
Independent Light
at position “A”
Wired to terms 3 &
7
Independent Light
at position “C”
Wired to terms 4 &
8
Not available in DP
Optional Panel Gasket:
P/N 807038-1 0.062” thickness
P/N 807038-2 0.031” thickness
K4 Connector P/N C801765
C1
C2
ORDERING INFORMATION
NOTES:
• No momentary switches with dependent lights.
• Neon lamps only to be coded with clear or
amber lenses.
• LED lenses must be clear or same color as LED.
• No legends on lamp side of switch.
• No dependent light in OFF positions.
• All legends printed on actuators without
lens(es) will be white except actuator codes
C, F, J, M & R.
• All legends printed on lenses will be white
except on clear lens(es) will be black.
L.
F.
Dependent Light
ON in position “A”
Wired to terms
1
& 7
Dependent Light
ON in position “C”
Wired to terms
2
& 8
M.
N.
P.
R.
NOTE: LED anode (+) terminal
number shown in
bold.
D
= Dependent Light
I
= Independent Light
Example:
K4AAKEEABA specifies Q.C. terminals, standard rating; bat handle; DPST two
position momentary ON, maintained OFF; 125VAC neon light; clear lens in positions “A”, no lens
in position “C”; dependent light ON in position “A”, wired to terminals 1 & 7; no legend.
•
K4 panel plugs available as shown on page 167.
Specifications Subject To Change Without Notice
➀
All legends are
white. Legend
cannot be on
the same side
as the lens.
www.ottoexcellence.com
157
K4
SNAP-IN
TOGGLES
SEALED, ILLUMINATED SNAP-IN TOGGLE
K4 SCHEMATICS
K4__A___A_
K4__B___A_
K4__C___A_
K4__D___A_
K4__E___A_
K4__F___A_
1
C
C
1
C
2
1
C
1
C
2
1
C
2
1
2
SPST - ON-NONE-OFF SCHEMATIC
SPST - ON-NONE-ON SCHEMATIC
SPST - (ON)-NONE-OFF SCHEMATIC
SPDT - (ON)-NONE-ON SCHEMATIC
SPDT - (ON)-OFF-(ON) SCHEMATIC
SPDT - ON-OFF-ON SCHEMATIC
K4__G___A_
C1
K4__H___A_
1
1
C1
K4__J___A_
1
C1
2
3
C2
4
C2
K4__K___A_
1
C1
K4__L___A_
1
C1
2
3
C2
4
3
C2
K4__M___A_
1
2
3
4
DPDT - (ON)-OFF-(ON) SCHEMATIC
K4__F___C_
7
1
1
C
2
2
8
C
2
C2
SPDT - (ON)-OFF-ON SCHEMATIC
DPST - ON-NONE-OFF SCHEMATIC
K4__N___A_
1
C1
2
3
C2
4
DPDT - ON-OFF-ON SCHEMATIC
C2
4
DPDT - (ON)-OFF-ON SCHEMATIC
C1
2
3
K4__P___A_
1
3
DPDT - ON-NONE-ON SCHEMATIC
DPST - (ON)-NONE-OFF SCHEMATIC
DPDT - (ON)-NONE-ON SCHEMATIC
K4__F___B_
GENERAL SCHEMATIC INFORMATION
INDICATES MAINTAIN ACTION
(FIXED POSITION)
INDICATES MOMENTARY ACTION
(AUTOMATIC RETURN POSITION)
C
SPDT - ON-OFF-ON SCHEMATIC
W/DEP LED IN "A"
SPDT - ON-OFF-ON SCHEMATIC
W/DEP LED IN "C"
K4__F___D_
8
7
1
C
2
C
8
K4__F___E_
7
1
C
2
K4__F___F_
7
1
2
8
C
K4__F___G_
8
7
C
K4__F___H_
1
2
C
1
2
8
7
SPDT - ON-OFF-ON SCHEMATIC
W/IND LED IN "A" & DEP LED IN "C"
4
3
K4__F___J_
7
1
2
8
SPDT - ON-OFF-ON SCHEMATIC
W/IND LED IN "A"
SPDT - ON-OFF-ON SCHEMATIC
W/IND LED IN "C"
SPDT - ON-OFF-ON SCHEMATIC
W/DEP LED IN "A" & "C"
SPDT - ON-OFF-ON SCHEMATIC
W/DEP LED IN "A" & IND LED IN "C"
SPDT - ON-OFF-ON SCHEMATIC
W/IND LED IN "A" & IND LED IN "C"
K4__F___G_
K4__F___B_
7
1
C
2
C
2
4
1
C
2
K1__F___C_
8
K4__F___D_
7
1
C
2
8
K4__F___E_
7
1
C
2
4
C
2
SPDT - ON-OFF-ON SCHEMATIC
W/DEP NEON IN "A" & IND NEON IN "C"
1
K4__F___F_
3
1
4
7
SPDT - ON-OFF-ON SCHEMATIC
W/DEP NEON BULB IN "A"
SPDT - ON-OFF-ON SCHEMATIC
W/DEP NEON BULB IN "C"
SPDT - ON-OFF-ON SCHEMATIC
W/IND NEON BULB IN "A"
SPDT - ON-OFF-ON SCHEMATIC
W/IND NEON BULB IN "C"
SPDT - ON-OFF-ON SCHEMATIC
W/DEP NEON BULB IN "A" & "C"
K4__F___H_
1
C
2
C
K4__F___J_
3
7
1
C
2
4
3
4
8
K4__F___B_
7
1
C
2
K4__F___C_
8
1
C
2
8
K4__F___D_
7
1
2
SPDT - ON-OFF-ON SCHEMATIC
W/IND NEON IN "A" & DEP NEON IN "C"
SPDT - ON-OFF-ON SCHEMATIC
W/IND NEON IN "A" & IND NEON IN "C"
SPDT - ON-OFF-ON SCHEMATIC
W/DEP BULB IN "A"
SPDT - ON-OFF-ON SCHEMATIC
W/DEP BULB IN "C"
SPDT - ON-OFF-ON SCHEMATIC
W/IND BULB IN "A"
K4__F___E_
8
7
1
C
2
C
K4__F___F_
7
1
2
8
C
K4__F___G_
8
7
C
K4__F___H_
1
2
C
1
2
8
7
SPDT - ON-OFF-ON SCHEMATIC
W/IND BULB IN "A" & DEP BULB IN "C"
4
3
K4__F___J_
7
1
2
8
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE AS LISTED.
MUST BE FREE FROM BURRS
AND SHARP EDGES
TOLERANCES
.03
.XX
.010
.XXX
2
ANGLES
DO NOT SCALE DRAWING
SPDT - ON-OFF-ON SCHEMATIC
W/IND BULB IN "C"
SPDT - ON-OFF-ON SCHEMATIC
W/DEP BULB IN "A" & "C"
SPDT - ON-OFF-ON SCHEMATIC
W/DEP BULB IN "A" & IND BULB IN "C"
SPDT - ON-OFF-ON SCHEMATIC
W/IND BULB IN "A" & IND BULB IN "C"
158
OTTO Full Line Catalog
Specifications Subject To Change Without Notice
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
