2
NPB 555
EZ Norm Series
The EZ Norm offers a simplified method for setting up and changing normals to a Bantam /
TT patchbay. Simply remove the middle designation strip, and rotate the center cam, using a
standard screwdriver. An audible “click” can be heard as you rotate from full normals to no
normals to half normals. An opaque marking strip is included to conceal the normal positions,
if needed.
EZ NORM JACK SPECIFICATIONS
MATERIALS:
Housing & Cover:
94V-0 rated thermoplastic
Sleeve Collar:
Nickel plated copper alloy
Tip, Ring, Shunt, & Sleeve Springs:
Nickel Silver
with welded contacts
Welded Contacts:
Gold
Cam Switching Springs:
Silver plated copper alloy
Cam Switching Contacts:
Silver plated copper alloy
MECHANICAL:
Jack Mechanical Life:
30,000 cycles
Cam Contact Mechanical Life:
30,000 cycles
TT
EZN
_
H
10
15
20
_
P
Insertion – Withdrawal Forces:
1 – 4 lbs.
Moisture resistance:
MIL-STD 202 Method 106
Thermal shock:
MIL-STD 202 Method 107
Salt spray:
MIL-STD 202 Method 101 (48 hrs.)
Vibration:
MIL-STD 202 Method 213
ELECTRICAL:
Jack Spring Contact Resistance:
30 milliohm Maximum
Cam Switch Contact Resistance:
30 milliohm Maximum
Insulation Resistance:
10,000 Megaohms
Dielectric Withstanding Voltage:
500 VAC (rms) at 60 Hz
Insertion Loss:
-0.5dB up to 10 MHz
_
D
E90
E56
E38
IDC
3PIN
WW
SL
CDL
FA
_
T
B
EDAC/ELCO 90 PIN CONNECTOR
EDAC/ELCO 56 PIN CONNECTOR
EDAC/ELCO 38 PIN CONNECTOR
IDC PPT TERMINALS
3 PIN CONNECTORS
WIRE WRAP PINS
SOLDER LUGS
CANNON DL 96 PIN CONNECTORS
FRONT ACCESS WITH PPT
REGULAR UNIT
HARNESS UNIT (UMBILICAL)
}
}
1 RACK UNIT HEIGHT
1.5 RACK UNIT HEIGHT
2 RACK UNIT HEIGHT
NO DOCKING
DOCKING CONNECTOR
EZ-NORM CAM JACKS
}
E90
E56
E38
IDC
3PIN
WW
SL
CDL
FA
EZN
TT
10
15
20
_
H
_
D
•
•
•
•
•
•
•
WIRE WRAP AND SOLDER LUG NOT AVAILABLE AS PREWIRES.
EVERYTHING EXCEPT SOLDER LUG AND WIRE WRAP AVAILABLE AS PREWIRE ONLY.
IDC NOT AVAILABLE IN 1 RACK UNIT HEIGHT.
FRONT ACCESS ONLY AVAILABLE AS 1 RACK UNIT WITH IDC SUPPORTS.
FRONT ACCESS HAS TRAY AND BAR COMBO SO NO SUPPORT DESIGNATION IS USED.
CABLE TRAY AND CABLE BAR DESIGNATIONS USED FOR UNWIRED UNITS ONLY.
UMBILICAL UNIT STANDARD WITH 4' HARNESS AND 2RU FRONT AND BACK PLANE.
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL. 60630
Phone: 773-792-2700 Fax: 773-792-2129
_
T
B
_
P
NO REAR SUPPORT
CABLE TRAY
CABLE BAR
TT SIZE JACKS
UNWIRED
PRE WIRED
}
}
UNWIRED ONLY
}
EZ Norm Series
NPB 555
Racks
The EZ Norm comes in 3 different
rack heights, 1RU, 1.5RU, and 2 RU.
3
Front Access
The Front Access option offers a slide-out tray,
allowing the end user to re-terminate the
patchbay from the front of the rack.
Harness Assembly
The EZ Norm is also offered as a harness
assembly, with a standard harness of 4 ft.
Custom lengths are available, call
Switchcraft for details.
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL. 60630
Phone: 773-792-2700 Fax: 773-792-2129
4
NPB 555
EZ Norm Series
Rear Connectors
The EZ Norm is offered with a wide range of back panel termination options.
Included are 3 pin, EDAC 38 pin, EDAC 56 pin, EDAC 90 pin, Cannon DL, Switchcraft PPT's,
solder terminals, and wire wrap terminals.
3 PIN
EDAC 38 PIN
EDAC 56 PIN
EDAC 90 PIN
CANNON DL
SOLDER
TERMINAL
WIRE WRAP
TERMINAL
SWITCHCRAFT’S
PPT PUNCH TERMINAL
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL. 60630
Phone: 773-792-2700 Fax: 773-792-2129
stm32/stm8
京公网安备 11010802033920号
EEWORLD
