The polarization beam combiner and depolarizer is a compact, high-performance
micro-optic-based depolarizing component. It normally functions as a combiner
to combine two orthogonal-polarized pump beams together and then converts
it to a depolarized beam at the output port. Depending on special customer
requirements, the isolator functionality can be integrated with the depolarizer or
remain as a stand-alone depolarizer without combining functionality.
• Telcordia GR-1221
north america
:
800 498-JDSU (5378)
worlDwiDe
:
+800 5378-JDSU
webSite
:
www.jdsu.com
polarization Beam comBiner anD Depolarizer
2
Dimensions Diagram
PBCD
IPBCD
Standalone depolarizer
All dimensions are mm.
specifications
parameter
pBcD
ipBcD
stand-alone
Depolarizer
Center wavelength, λ
C
Wavelength range, λ
S
Insertion loss
1
Wavelength-dependent loss
Degree of polarization
Isolation
Return loss
Input power
2
Operating temperature
Storage temperature
Tensile load
Dimensions (D x L)
Fiber type
Pigtail color code
Maximum
Maximum
Maximum
Minimum
Minimum
Maximum
Maximum
Maximum
1450 nm
λ
C
±30 nm
0.8 dB
0.9 dB
0.7 dB
0.15 dB
10%
N/A
20 dB
N/A
50 dB
2000 mW
–5 to 75°C
–40 to 85°C
5 N
5.5 x 58 mm
Ports 1 and 2: Panda PM fiber, port 3: SMF-28 fiber
Port 1: black, port 2: clear, port 3: clear
Note: Parameters are specified for the whole wavelength range and operating temperature range without a connector. The direction of linear polarization is aligned with the
slow axis of the PM fiber.
1. Extra loss from pump PER is excluded.
2. Maximum input power for each port is 1000 mW.
polarization Beam comBiner anD Depolarizer
ordering information
For more information on this or other products and their availability, please contact your local JDSU account manager
or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
sample: pBD-c34p10000
pBD-
code
C
I
S
code
34P
S34
XXX
Functions
Polarization beam combiner
and depolarizer
Polarization beam combiner
and depolarizer with isolator
Stand-alone depolarizer
pump Dependent
JDSU Raman pump S34+
JDSU Raman pump S34
Others. Please contact JDSU for
further ordering information.
code
1
2
code
0
1
Fiber length
1 m
2 m
Fiber Buffer type
250 µm bare fiber¹
900 µm loose tube
code
0
1
2
3
4
code
0
1
2
3
4
connector² (port 1)
No connector
FC/SPC
FC/APC
SC/SPC
SC/APC
connector² (port 2)
No connector
FC/SPC
FC/APC
SC/SPC
SC/APC
code
0
1
2
3
4
connector² (port 3)
No connector
FC/SPC
FC/APC
SC/SPC
SC/APC
1. Connector is not available on 250 µm bare fiber.
2. Insertion loss and return loss depend on connector type.
clk: system clock; rst: reset signal
clk1us: the clock for sampling AC signals;
pulse: AC signal zero-crossing square wave
data: sine input data
rms_div: The sum of the sampled data in one cycle accor...
My program communicates with peripherals through the parallel port, but my peripherals are connected to the computer through the serial port. There will be no changes in the hardware, and I cannot use...
[i=s]This post was last edited by littleshrimp on 2018-1-24 12:22[/i] This hex file is the content of the challenge I have completed, including all the functions of the challenge. The average working ...
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
