302074-6P93R100TB datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> 302074-6P93R100TB

302074-6P93R100TB: DescriptionFixed Resistor, Metal Foil, 1.5W, 93.1ohm, 500V, 0.01% +/-Tol, -2,2ppm/Cel,; CategoryPassive components The resistor; File Size112KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com

Download Datasheet Parametric View All

302074-6P93R100TB Overview

Fixed Resistor, Metal Foil, 1.5W, 93.1ohm, 500V, 0.01% +/-Tol, -2,2ppm/Cel,

302074-6P93R100TB Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Objectid	978162732
Reach Compliance Code	unknown
ECCN code	EAR99
structure	Hermetically Sealed
JESD-609 code	e0
Lead diameter	0.64 mm
Lead length	25.4 mm
Number of terminals	4
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package diameter	12.7 mm
Package length	25.4 mm
Package form	4 Terminals
method of packing	Bulk
Rated power dissipation(P)	1.5 W
resistance	93.1 Ω
Resistor type	FIXED RESISTOR
series	H SERIES-OTHER
technology	METAL FOIL
Temperature Coefficient	-2,2 ppm/°C
Terminal surface	Tin/Lead (Sn/Pb)
Tolerance	0.01%
Operating Voltage	500 V

Preview

Download Datasheet

View All

H Series

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed High Precision Bulk

Metal

Foil Technology Resistors with TCR of ± 2 ppm/°C, Tolerance of ± 0.001 % and

Load Life Stability of ± 0.005 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES

•

Temperature coefficient of resistance (TCR):

± 2 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C

ref.).

For

ultra

high

performances

(instrumentation and metrology) please refer to

the last page

•

Resistance range: 5

to 1.84 MΩ (higher or

lower values of resistance available)

•

Vishay Foil resistors are not restricted to standard values;

specific “as required” values can be supplied at no extra

cost or delivery (e.g. 1K2345 vs. 1K)

•

Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)

•

Tolerance: to ± 0.001 % (10 ppm)

•

Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power

•

Load life stability can be considerably improved

through in-house stabilization

•

Shelf life stability: ± 2 ppm for at least 6 years

(unaffected by humidity)

•

Electrostatic discharge (ESD) up to 25 000 V

•

Rise time: 1 ns effectively no ringing

•

Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)

•

Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)

•

Thermal EMF: 0.05 µV/°C typical

•

Voltage coefficient: < 0.1 ppm/V

•

Non-inductive: < 0.08 µH

•

Non-inductive, non-capacitive design

•

Non hot spot design

•

Terminal finish available: lead (Pb)-free or tin/lead alloy

•

Impervious to harmful environments - oil-filled

•

Compliant to RoHS directive 2002/95/EC

•

Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishay.com

•

For better performances (values, TCR, tolerance, stability),

please see the HZ series

INTRODUCTION

The H series resistors are oil-filled, hermetically sealed ultra

precision resistors and are used as secondary standards for

metrology applications.

The hermetic sealing eliminates the ingress of moisture and

oxygen, while the oil acts as a thermal conductor, thus

eliminating the long-term degradation elements of unsealed

resistors, while at the same time allowing the device to

accept short periods of overload without degradation.

Vishay’s Bulk Metal

Foil outperforms all other resistor

technologies available today for applications that require

precision and stability. When combined with the hermetic

sealing and oil filling, the H series resistors become

the most

precise and stable resistors available.

With accuracies of 0.001 %, a resistance range from 5

to 1.84 MΩ, and long term shelf life of less than 2 ppm,

these devices are virtually secondary standards that can be

carried in sets for daily or periodic calibration of factory

measurement equipment.

The H series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE

VALUE (Ω)

100 to < 1M84

50 to < 100

5 to < 50

TYPICAL TCR AND MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 2 ± 2.5

± 2 ± 3.5

± 2 ± 4.5

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

* Pb containing terminations are not RoHS compliant, exemptions may apply

Resistance Change (ppm)

Time (Days)

Document Number: 63006

Revision: 07-Dec-09

For any questions, contact:

foil@vishay.com

www.vishay.com

Recommended Resources

Measuring amplifier with high common-mode rejection

Dimming, charging, emergency desk lamp circuit

sound level generator

Transmitting color video signals using ordinary twisted pairs

555 multi-channel wired remote control switch circuit

Circuit design reference diagram

Defective wall lamp: This Korean designer seems to have a grudge against wall lamps, and he insists that we "harshly" bully them before we can see the light. So, let's take a look at these abused lamps, shall we?This guy ...; wljmm Creative Market

[ST Theme Month] STM32L011 Review——by suoma: [ST Theme Month] STM32L011 Review——by suoma [url=https://bbs.eeworld.com.cn/thread-490122-1-1.html] [ST Theme Month] Unboxing and Powering on [/url] [url=https://bbs.eeworld.com.cn/thread-490126-1-1.h...; okhxyyo stm32/stm8

Why can’t the simulation produce the correct result?: As shown in the figure: Multisim is used to simulate the voltage doubler rectifier circuit, with a transformation ratio of 20. According to the principle, if the voltage between C6 and the ground is t...; 程序会不会 Analog electronics

Commonly used devices in TI products - analog and digital: In actual design, there are still many TI devices used, such as various DSPs, analog devices, etc. Texas Instruments (TI) provides a wide range of operational amplifier products through a variety of d...; qwqwqw2088 Analogue and Mixed Signal

Anyone who knows how to adjust CE and surf the Internet can come in.: When I was browsing the Internet, I created a new connection, clicked on configuration and connmc.exe crashed. After checking, I found that the data returned by the command (CGQREQ, CGQMIN) was empty....; losng Embedded System

Automatically generate Dockerfile to build Docker image: [i=s]This post was last edited by liuyongsuse on 2020-12-6 00:55[/i]You can build a Docker image by automatically generating a Dockerfile through the configuration of pom.xml without Dockerfile. The D...; liuyongsuse Linux and Android

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components