302074-6Z16K000CB datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> 302074-6Z16K000CB

302074-6Z16K000CB: DescriptionFixed Resistor, Metal Foil, 1.5W, 16000ohm, 500V, 0.25% +/-Tol, -.2,.2ppm/Cel,; CategoryPassive components The resistor; File Size456KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com

Download Datasheet Parametric View All

302074-6Z16K000CB Overview

Fixed Resistor, Metal Foil, 1.5W, 16000ohm, 500V, 0.25% +/-Tol, -.2,.2ppm/Cel,

302074-6Z16K000CB Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Objectid	852997570
Reach Compliance Code	compliant
ECCN code	EAR99
structure	Hermetically Sealed
JESD-609 code	e0
Lead diameter	0.645 mm
Lead length	25.4 mm
Number of terminals	4
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package diameter	12.7 mm
Package length	25.4 mm
Package form	4 Terminals
method of packing	Bulk
Rated power dissipation(P)	1.5 W
resistance	16000 Ω
Resistor type	FIXED RESISTOR
series	HZ(OTHER)
technology	METAL FOIL
Temperature Coefficient	-.2,.2 ppm/°C
Terminal surface	Tin/Lead (Sn/Pb)
Tolerance	0.25%
Operating Voltage	500 V

Preview

Download Datasheet

View All

HZ Series (Z-Foil) with Zero TCR

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed Construction Ultra High

Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 %

and Load Life Stability of ± 0.002 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES



Temperature coefficient of resistance (TCR):

± 0.2 ppm/°C typical (- 55 °C to + 125 °C,

+ 25 °C ref.). For ultra high performances

(instrumentation and metrology) please refer to

the last page



Resistance range: 5



to 1.1 M (higher or lower values of

resistance available)



Foil resistors are not restricted to standard values; specific

“as required” values can be supplied at no extra cost or

delivery (e.g. 1K2345 vs. 1K)



Power coefficient “R due to self heating”:

5 ppm at rated power with the Z-Foil technology



Tolerance:

to ± 0.001 % (10 ppm)



Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power



Load life stability, can be considerably improved

through in-house stabilization



Shelf life stability: 2 ppm for at least 6 years

(unaffected by humidity)



Electrostatic discharge (ESD) up to 25 000 V



Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)



Non-inductive, non-capacitive design



Non hot spot design



Rise time: 1 ns effectively no ringing



Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)



Thermal EMF: 0.05 µV/°C typical



Voltage coefficient: < 0.1 ppm/V



Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)



Non-inductive: < 0.08 µH



Terminal finish available: lead (Pb)-free or tin/lead alloy



Impervious to harmful environments - oil filled



Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com



For better performances (values, TCR, tolerance, stability),

please contact us

INTRODUCTION

The Z-Foil based oil filled, hermetically sealed HZ Series

resistors represent an industry breakthrough. The hermetic

sealing eliminates the ingress of moisture and oxygen, while

the oil acts as a thermal conductor, thus eliminating

long-term degradation elements of unsealed resistors, while

at the same time allowing the device to accept short periods

of overload without degradation.

The Z-Foil technology provides a significant reduction of the

resistive components, sensitivity to ambient temperature

variations (TCR) and applied power changes (PCR). When

combined with the hermetic sealing and oil filling, the

HZ Series resistors become

the most precise and stable

resistors available.

They are used as the most precise

secondary standards for ultra precision metrology.

With accuracies of ± 0.001 % (10 ppm) and a resistance

range from 5



to 1.1 M and long term shelf life of less than

2 ppm, these devices are virtually secondary standards that

can be carried in sets for daily or periodic calibration of

factory measurement equipment.

The HZ Series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE VALUE

()

TYPICAL TCR AND

MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 0.2 ± 2

± 0.2 ± 3

± 0.2 ± 4

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

100 to < 1M1

50 to < 100

5 to < 50

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

Resistance Change (ppm)

Time (Days)

Document Number: 63120

Revision: 25-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com

Recommended Resources

Phone in use indicator light circuit

500Hz bandpass filter circuit

Precision timer composed of LM567 and MP1826

Capacitor negative feedback sawtooth wave circuit (2)

Vacuum tube fixed grid negative voltage mode power amplifier circuit

Computer motherboard circuit diagram 815 5_19

Books--ARM Development Detailed Explanation Complete Collection: ...; cnhf MCU

Several questions about GPIO pins as interrupt sources: There are several interrupt subroutines in my program that are triggered by the dual edges of the GPIO pins (the actual pins are not connected to peripherals and are just used as flags) Question 1: If...; 030332 Microcontroller MCU

The accuracy and price of digital multimeters: For example, there are two types of multimeters, the Chinese Uni-T and the American Fluke. Although the accuracy of the Uni-T is higher than that of the Fluke (as stated in the manual), it is not as e...; huixianfxt Integrated technical exchanges

Useful information | 19 5V to 3.3V conversion methods commonly used by hardware engineers: 01. Use LDO regulatorStandard three-terminal linear regulators typically have a dropout voltage of 2.0-3.0V. They cannot be used to reliably convert 5V to 3.3V. Low Dropout (LDO) regulators, which hav...; okhxyyo Power technology

Recompile the previous project file with ICC AVR7.22 and it does not run properly: [color=#333333][font=Arial, Helvetica, sans-serif][size=12px]I used other microcontrollers before, but never AVR. I changed my job this time, and there happened to be a project that needed some minor ...; haozi100 Microchip MCU

Can QT be used on LCDs without a touch screen?: That is to say, it is just an ordinary LCD screen as the UI interface, without touch operation, and physical keys are used to control the UI menu and buttons. Can QT be used in this case?...; stm32f103vct6 Linux and Android

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components