Specifications are limited by the circuit and resistance value.
Please contact us separately.
3 digits
●
Resistor Networks：RNX, RTX, RTY
RNX
Circuit
Code
RNX: Custom Resistor Network
RTX,RTY: SOT-23 Resistor network
●
Resistor Networks：RDA, RDB
RDA
Circuit
Code
RDA: Dual terminator network
RDB: Differential terminator network
Example
Q20
Package
Symbol
Package type symbol＋
Number of pins
Example
T
Terminal
Surface Material
T :Sn
TE
Taping
TE: Plastic
embossed
5001
Custom
Code
Q20
Package
Symbol
Same as above
(Except Q24, N14, N08)
T
Terminal
Surface Material
T:Sn
TE
Taping
TE: Plastic
embossed
471J
Nominal Resistance
& Tolerance of R1
3 digits G: ±2%
J : ±5%
511J
H
Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS.
Nominal Resistance
T.C.R.
& Tolerance of R2 （×10
−6
/K）
3 digits G: ±2%
E :±25
J : ±5%
C:±50
H:±100
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
■Ratings
Package
Package Symbol
Package Power Rating
Resistance Range
Max. Working Voltage
Rated Voltage
Rated Ambient Temp.
Operating Temp. Range
10Ω〜1kΩ
1.1kΩ〜
Q16
0.8W
QSOP
Q20
1.0W
Q24
1.0W
N08
0.4W
SOIC
N14
0.6W
N16
0.8W
SOT-23
S03
0.2W
Power Rating 200mW/Resistor Element
※1
Power Rating 50mW/Resistor Element
※1
100V
√￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣
Rated Power×Nominal Resistance Value, Rated Voltage should not exceed Max. Working Voltage.
＋70℃
−55℃〜＋125℃
※2
Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be needed. Please inquire of us about
conditions.
※1 Total power consumption of all elements should not exceed the package power rating.
※2 About operating temperature range −55℃〜＋155℃, We can provide as custom devices. Please inquire of us about it.
●Standard Resistor Networks
Circuit
Code
Circuit Schematics
（Top View）
Pin n
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
C:±50
H:±100
Resistance Range
（Ω）
E24
and Absolute Tolerance
F:±1%
G:±2%, J:±5%
100〜100k 100〜100k
51〜100k
30〜100k
n/2
51〜100k
10〜100k
Circuit
Code
Circuit Schematics
（Top View）
Pin n
R1
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
Resistance Range(Ω) (E24)
and Resistance Tolerance
G:±2%, J :±5%
Network Resistors
Pin n
RBA
R
8, 14, 16
R
20, 24
n/2
Number of Pins : n=8,16,20,24
RDA
R2
-
R1
R2
-
16, 20
C:±50
H:±100
Pin n
R1
Pin 1
Pin n
R
Pin n
Pin 1
Pin 1
n/2
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin n
Pin
:
Number of Pins
n
n=8,16,20,24
E:±25
n
100〜100k
Pin
100〜100k
R
Pin n
R1
R2
E:±25
C:±50
H:±100
RBB
R
Pin 1
n/2
Pin
8, 14, 16
20, 24
C
R
n
C:±50
R1
R
R2
R1
Pin 1
51〜100k
30〜100k
n/2
51〜100k
10〜100k
100〜40k
2R
n/2
RDB
Pin 1
R1
Pin 1
n/2
16, 20
R2
R1
Pin
Number
1
Pins
R
2
1
n/2
: n=8,16,20,24
R
of
H:±100
E:±25
C:±50
Pin 1
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin 1
Number of Pins : n=3,SOT-23 Only
Pin 1
100〜40k
Pin n
R
R
Pin n
RTX
n/2
Pin n
R
1
R
2
R
2R
2R
R
R
2
3
SOT-23
Only
2R
2R
Number of Pins : n=8,16,20,24
RLA
R
2R
2R
R
2R
2R
n/2
14, 16
H:±100
1k〜30k
H:±100
2R
51〜40k
2R
51〜40k
2R
Pin 1
Pin 1
n/2
ber of Pins : n=8,16,20
Number of Pins : n=3,SOT-23 Only
Pin 1
n/2
■Performance
Test Items
Resistance
T.C.R.
Resistance to soldering heat
Rapid change of temperature
Moisture resistance
Endurance at 70℃
High temperature exposure
Performance Requirements
ΔR±
（％＋0.05Ω）
Limit
Typical
25℃
＋25℃/−55℃, ＋25℃/125℃
260℃±5℃, 10s±1s
−55℃
（30min.）
/＋125℃
（30min.）, 100 cycles
40℃±2℃, 90〜95%RH, 1000h
1.5h ON/0.5 h OFF cycle
70℃±2℃, 1000 h
1.5 h ON/0.5 h OFF cycle
＋125℃, 1000 h
Within specified tolerance
Within specified T.C.R.
0.1
※3
0.5
※3
Test Methods
0.05
0.05
0.05
0.05
0.10
0.5
※3
0.25
※3
0.25
※3
※3 Guaranteed value differs depending on resistance value.
■Precautions for Use
・
he resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive
T
film, abnormality in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the
components, but attention should be paid to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V and more at
100pF, 1.5kΩ) to cause a change in resistance in the conditions of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply
the excessive static electricity at the time of mounting on the boards. When designing, consideration can be taken into withstanding ESD for customized KPC
products. Please consult with us about the details.
・Hand
soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
NETWORKS
EU
RoHS
KPC RIA
KPC RNX
Isolated Resistor Networks
Custom Resistor Networks
■Applications
・
utomotives, medical instrument, industrial machines, Measurement equipment
A
・
omputers and networks
C
・
igh precision OP amp circuit, High precision voltage divider
H
■Features
・
High precision resistor networks
Combination of different resistance is available for custom circuit.
I have a project that uses MSP430F5529. I have an emulator that was given to me when I bought the MSP430F149 development board, but I don't know if it can emulate 5529. Also, last time I followed the ...
The following application example demonstrates the speed performance achieved when using an optimized configuration of a Keithley Model 707B Switch Mainframe [1] and a Keithley Model 2636A SourceMeter...
I see many people have made it online. It seems that similar tutorials or learning are not very easy. Apart from other things, the single FAT file system is daunting. How did these experts learn and m...
I would like to ask an expert for help. I have just started using STM8S103F2P6 and want to write a program that can directly manipulate IO bits, but I don't know how to set it up....
For the purpose of the experiment, two power supplies were connected in series to test the circuit. One of the power supplies had a problem. When the output current was high, it suddenly decreased. I ...
A biped robot joint constructed by pneumatic artificial muscles is introduced. The joint uses the flexible characteristics of pneumatic artificial muscles to effectively control the impact of the la...[Details]
This issue will briefly introduce the test related to spectrum - occupied bandwidth.
Definition: Occupied bandwidth refers to the bandwidth corresponding to 99% of the total transmitted power, cent...[Details]
Engineers who are new to wireless design and wireless product development need to master the basics of
RF measurement
. In many cases, this process is to enable engineers who have been engag...[Details]
As the whole equipment is becoming increasingly miniaturized and power-saving, low-dropout linear regulators (LDOs) with low power consumption are becoming the mainstream in the market for linear regu...[Details]
Semiconductor devices used in high-end computing (advanced microprocessors) and consumer electronics (graphics and gaming chipsets) devices generally provide data rates up to 6.4Gbps through hig...[Details]
With the continuous emergence of new technologies and the increasing complexity of DSP real-time systems, there are more and more different types of external devices. Writing drivers for these exte...[Details]
TMS320C62X is a new generation of high-performance fixed-point digital signal processor (
DSP
) chip
from Texas Instruments (
TI
). The software design problem based on
DSP
is to use...[Details]
Abstract:
This paper introduces the excitation system designed for 3/3 phase double winding induction generator, which is composed of DSP and FPGA. The interface circuit of the control sys...[Details]
Abstract:
Online dynamic signature authentication is increasingly used in various fields, especially in banking and financial systems and personal identification. As the basis of online signa...[Details]
Billboards are information display terminals for the public, with a wide range of civil and commercial values. However, most of the information displayed on billboards is currently solidified in th...[Details]
Preface
In the application of PLL, DLL and CDR circuits, people generally require the output clock signal to have a 50% duty cycle so that data can be sampled at both the rising and fallin...[Details]
Currently, there are huge differences in market analysis statistics for high-brightness LEDs (light-emitting diodes). Despite the divergence of forecasts, one trend is clear: the high-brightness (H...[Details]
The teardown of the third-generation iPhone shows that the phone is more integrated and may cost less, in part because of the use of chips from Broadcom and Toshiba. One analyst joked that the "S" ...[Details]
PSoC is a programmable system-on-chip produced by Cypress Semiconductor with an 8-bit MCU core and a digital and analog mixed signal array. PSoC integrates three programmable capabilities into one....[Details]
introduction
The latest embedded designs enable a multitude of complex new products and services across a wide range of industries and applications. Driven by shrinking cost constraints an...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
