Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Nominal Operating Parameters
Specification
Parameter
Min
General Performance
Operating Frequency
Gain
IP3
P1dB
P
3dB
Noise Figure at Mid-Band
Input Return Loss
Output Return Loss
Supply Current
Supply Voltage
0
10.8
11.8
25
15
17.5
4
16
15
100
6.5
mA
V
DC
35
GHz
dB
dBm
dBm
dBm
dB
dB
3dB BW
20GHz
P
OUT
0dBm, 20GHz
20GHz
20GHz
20GHz
Unit
Typ
Max
Condition
T
A
= +25°C, V
DD
= +8V
DC,
V
G2
= +1.5V
DC
,
I
DD
= 100mA*
*Adjust VTI between -1.5V
DC
to +0.2V
DC
to achieve I
DD
= 160mA typical., V
G2
= 2.75V
DC
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or
customerservice@rfmd.com.
DS140210
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 7
SDA-5000
Typical Performance
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or
customerservice@rfmd.com.
DS140210
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 7
SDA-5000
Typical Performance (Continued)
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or
customerservice@rfmd.com.
DS140210
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
4 of 7
SDA-5000
Application Schematic
NOTE: Drain Bias (V
DD
) must be applied through a broadband bias tee or external bias network.
Die Drawing
(Dimensions in millimeters)
Notes:
1.
2.
3.
4.
5.
6.
7.
No connection required for unlabeled bond pads
Die thickness is 0.102mm (4mil)
Typical bond pad is 0.100mm square
Backside metallization: gold
Backside metal is ground
Bond pad metallization: gold
Refer to drawing posted at www.rfmd.com for tolerances
DS140210
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or
customerservice@rfmd.com.
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
京公网安备 11010802033920号
EEWORLD
