302074-6ZT348K00BB datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> 302074-6ZT348K00BB

302074-6ZT348K00BB: DescriptionFixed Resistor, Metal Foil, 1.5W, 348000ohm, 500V, 0.1% +/-Tol, -.2,.2ppm/Cel,; CategoryPassive components The resistor; File Size115KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com; Environmental Compliance

Download Datasheet Parametric View All

302074-6ZT348K00BB Overview

Fixed Resistor, Metal Foil, 1.5W, 348000ohm, 500V, 0.1% +/-Tol, -.2,.2ppm/Cel,

302074-6ZT348K00BB Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	979622004
Reach Compliance Code	unknown
ECCN code	EAR99
structure	Hermetically Sealed
JESD-609 code	e3
Lead diameter	0.64 mm
Lead length	25.4 mm
Number of terminals	4
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package diameter	12.7 mm
Package length	25.4 mm
Package form	4 Terminals
method of packing	Bulk
Rated power dissipation(P)	1.5 W
resistance	348000 Ω
Resistor type	FIXED RESISTOR
series	HZ SERIES-OTHER
technology	METAL FOIL
Temperature Coefficient	0.2 ppm/°C
Terminal surface	Tin (Sn)
Tolerance	0.1%
Operating Voltage	500 V

Preview

Download Datasheet

View All

HZ Series (Z-Foil) with Zero TCR

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed Construction Ultra High

Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 %

and Load Life Stability of ± 0.002 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES

•

Temperature coefficient of resistance (TCR):

± 0.2 ppm/°C typical (- 55 °C to + 125 °C,

+ 25 °C ref.). For ultra high performances

(instrumentation and metrology) please refer to

the last page

•

Resistance range: 5

to 1.1 MΩ (higher or lower values of

resistance available)

•

Vishay Foil resistors are not restricted to standard values;

specific “as required” values can be supplied at no extra

cost or delivery (e.g. 1K2345 vs. 1K)

•

Power coefficient “ΔR due to self heating”:

5 ppm at rated power with the Z-Foil technology

•

Tolerance:

to ± 0.001 % (10 ppm)

•

Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power

•

Load life stability, can be considerably improved

through in-house stabilization

•

Shelf life stability: 2 ppm for at least 6 years

(unaffected by humidity)

•

Electrostatic discharge (ESD) up to 25 000 V

•

Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)

•

Non-inductive, non-capacitive design

•

Non hot spot design

•

Rise time: 1 ns effectively no ringing

•

Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)

•

Thermal EMF: 0.05 µV/°C typical

•

Voltage coefficient: < 0.1 ppm/V

•

Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)

•

Non-inductive: < 0.08 µH

•

Terminal finish available: lead (Pb)-free or tin/lead alloy

•

Impervious to harmful environments - oil filled

•

Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishay.com

•

For better performances (values, TCR, tolerance, stability),

please contact us

INTRODUCTION

The Z-Foil based oil filled, hermetically sealed HZ Series

resistors represent an industry breakthrough. The hermetic

sealing eliminates the ingress of moisture and oxygen, while

the oil acts as a thermal conductor, thus eliminating

long-term degradation elements of unsealed resistors, while

at the same time allowing the device to accept short periods

of overload without degradation.

The Z-Foil technology provides a significant reduction of the

resistive components, sensitivity to ambient temperature

variations (TCR) and applied power changes (PCR). When

combined with the hermetic sealing and oil filling, the

HZ Series resistors become

the most precise and stable

resistors available.

They are used as the most precise

secondary standards for ultra precision metrology.

With accuracies of ± 0.001 % (10 ppm) and a resistance

range from 5

to 1.1 MΩ and long term shelf life of less than

2 ppm, these devices are virtually secondary standards that

can be carried in sets for daily or periodic calibration of

factory measurement equipment.

The HZ Series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE VALUE

(Ω)

TYPICAL TCR AND

MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 0.2 ± 2

± 0.2 ± 3

± 0.2 ± 4

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

100 to < 1M1

50 to < 100

5 to < 50

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

Resistance Change (ppm)

Time (Days)

Document Number: 63120

Revision: 03-Dec-09

For any questions, contact:

foil@vishay.com

www.vishay.com

Recommended Resources

Single line remote forward and reverse control circuit

20K bit optical receiving circuit

555 electronic imitation mouse repeller circuit

Proportional feedback and differential feedback circuits

A circuit for protection based on the principle that UCE increases when IGBT overcurrent

FM transmitter circuit 03

Smart traffic light simple keil program and proteul design diagram: This design realizes a simple 30-second traffic light function. It is the first small design shared...; 小奋青 ARM Technology

Xilinx Series FPGA Chip IP Core Explained [Liu Donghua, ed.] 536 pages: [font="][b]Xilinx系列FPGA芯片IP核详解 [刘东华编著]共[536页]，有书签很全。分享给大家[/b][/font]...; yhsy1002 FPGA/CPLD

9B90 C3 PB0 input mode external pull-up can only pull to 1.3V???: Is there anything special about the 9B90 C3 PB0 port? Why can the external pull-up only go up to 1.3V in input mode?I hope experts can give me some advice!...; chengtoby Microcontroller MCU

Clock jitter analyzed in the time domain Part 1: [i=s] 本帖最后由 dontium 于 2015-1-23 13:39 编辑 [/i]IntroductionNewer high-speed ADCs e outfittedwith a large analog-input bandwidth (aboutthree to six times the maximum samplingfrequency) so they can be use...; 安_然 Analogue and Mixed Signal

Talking about mini-SATA: mSATA (mini-SATA) is a mini version of SATA interface. Its appearance and electronic interface are exactly the same as mini PCI-E, but the electronic signals are different and the two are incompatible...; Sur Integrated technical exchanges

Can you guys help me see how I can use interrupts to make the LED blink, but why doesn't it work?: int main(void){// disable JTAG port DDPCONbits.JTAGEN = 0; //T2 interrupt initializationSEI(); //Turn on general interruptIFS0bits.T2IF=0;//Clear interrupt flagIPC2bits.T2IP=5;//Set interrupt priority...; wuhaijing231 Microchip MCU

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components