Surface Mount Hyperabrupt Wide-Band Tuning Varactors
Rev. V8
Features
Low Cost
Very High Capacitance Ratio from 1 to 8 Volts
Surface Mount Package
High Quality Factor
Useful for Battery Applications
SPC Monitored Ion Implantation for Excellent
C-V Repeatability
Available in Tape and Reel
Lead-Free
RoHS* Compliant
SOT-23 (ODS-287)
Description
The MAVR-000079 - 83 series of silicon hyperabrupt
junction tuning varactors is produced with ion
implantation and advanced epitaxial growth
techniques. These diodes have thermal oxide
passivation, and feature very high capacitance ratio
and quality factor. They are well suited for use from
the sub-HF through UHF frequency range. The
standard capacitance tolerance is ±10%, with tighter
tolerances available. Capacitance matching at one
or more bias voltages is also available. These
diodes are offered with standard Sn/Pb plating, as
well as 100% matte Sn plating.
single
common cathode
Applications
This series of hyperabrupt junction tuning varactors
is suggested for usage where a large frequency
change is required with only a small change in
tuning voltage. This series is appropriate for usage
in wide band voltage controlled oscillators and
voltage controlled filters which require the largest
rate of change of capacitance with voltage. The
large change in capacitance from 1 to 8 volts makes
them very attractive for battery operated or other
systems with limited available control voltage. This
varactor series can be used in VCO’s and VTF’s
from approximately 100 KHz through the UHF
frequency band.
Ordering Information
Part Number
MAVR-000079-0287FT
MAVR-000080-0287AT
MAVR-000081-0287AT
MAVR-000082-0287AT
MAVR-000083-0287AT
Single Configuration
tape and reel
tape and reel
tape and reel
tape and reel
tape and reel
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAVR-0000xx Series
Surface Mount Hyperabrupt Wide-Band Tuning Varactors
Rev. V8
Electrical Specifications @ T
A
= +25°C
Breakdown Voltage @ I
R
= 10 mA, V
b
= 12 V Minimum
Reverse Leakage Current @ V
R
= 10 V, I
R
= 100 nA Maximum
Temperature Coefficient of Capacitance @ V
R
= 8 V, TCC = 400 ppm/°C Typical
Ct @ 1 MHz
(pF)
Part #
V
R
= 1 V
Min.
MAVR-000079-0287FT
MAVR-000080-0287AT
MAVR-000081-0287AT
MAVR-000082-0287AT
MAVR-000083-0287AT
87.4
40.0
16.2
11.5
7.9
V
R
= 2.5 V
Min.
48.7
22.3
9.1
6.6
4.5
Max.
59.5
27.3
11.1
8.0
5.5
V
R
= 4 V
Max
27.3
13.1
5.2
3.8
2.6
V
R
= 8 V
Max.
11.8
5.5
2.4
1.8
1.3
Capacitance
Ratio @ 1 MHz
Ct
1V
/Ct
8V
V
R
= 1 V / 8 V
Typ.
9.1
8.9
8.5
8.2
7.8
Q
@ 50 MHz
V
R
= 4 V
Typ.
80
150
300
350
450
Absolute Maximum Ratings
1,2
Parameter
Reverse Voltage
Forward Current
Power Dissipation
Operating Temperature
Storage Temperature
Absolute Maximum
12 V
50 mA
50 mW @ +25°C
-65°C to +125°C
-65°C to +125°C
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
These electronic devices are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these devices.
1. Operation of this device above any one of these parameters
may cause permanent damage.
2. Please refer to application note M538 for surface mounting
instructions.
Total Capacitance vs. Reverse Voltage
Nominal Q vs. Reverse Voltage
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAVR-0000xx Series
Surface Mount Hyperabrupt Wide-Band Tuning Varactors
Rev. V8
Mounting Information
The illustration indicates the recommended
mounting
pad
configuration
for
the
SOT-23 package. Solder paste containing flux
should be screened onto the pads to a thickness of
0.005 - 0.007 inches. The plastic package is placed
in position, firmly adhering to the solder paste.
Permanent attachment is performed by a reflow
soldering procedure during which the tab
temperature does not exceed +275°C and the body
temperature does not exceed +250°C, for standard
models and +260°C for the RoHS compliant devices.
Please refer to Application Note M538 for surface
mounting instructions.
SOT-23 (Case Style 287)
F
D
A
N
M
G
B
K
L
H
J
C
E
SOT-23
.030 min.
0.80
SOT-23 (Case Style 287)
DIM.
A
B
.090
2.2
INCHES
MIN.
0.013
0.003
0.110
0.047
MAX.
0.048
0.008
0.040
0.020
0.006
0.119
0.056
MILLIMETERS
MIN.
0.35
0.08
2.80
1.20
MAX.
1.22
0.20
1.00
0.50
0.15
3.00
1.40
C
D
E
F
G
H
J
.035 min.
0.90
.037
0.95
0.75
1.9
0.037 typical
0.075 typical
0.103
0.024
0.95 typical
1.90 typical
2.60
0.60
Dimenstions: inches
mm
K
L
DIM.
M
N
GRADIENT
10 max.
2 . . .30
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAVR-0000xx Series
Surface Mount Hyperabrupt Wide-Band Tuning Varactors
Rev. V8
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
At present, the output of MQ series gas sensors are all voltage values. The data sheet gives this change curveAt present, based on this table, I have listed a Vout-ppm table without considering the in...
PikesPEAK — Modular high-speed torsional vibration measurement systemIn order to optimize vehicle performance and fuel consumption, it is necessary to effectively analyze the torque and vibration beha...
[i=s]This post was last edited by paulhyde on 2014-9-15 03:56[/i] [size=5]I have collected and sorted out the questions of the three national undergraduate electronic design competitions from 2003 to ...
Assume that data is read from 8-bit AD (if it is a higher-bit AD, the data type can be defined as int), the subroutine is get_ad();
1. Limited secondary filtering
/* A value can be adjust...[Details]
1 Introduction
The high temperature tester is mainly used for temperature tracking measurement and data acquisition during the heating process. By systematically analyzing the test data, the...[Details]
Floating-point digital signal processing has become a constant requirement for precision technology, often in applications requiring high accuracy in areas such as aviation, industrial machinery, a...[Details]
1 Introduction
Solar street lights are mainly composed of four parts: solar photovoltaic cell components, batteries, charge and discharge controllers, and lighting fixtures. The bo...[Details]
This paper designs a dot matrix LED text display screen that is easy to update, expandable, and low-cost. The way to reduce costs is
① Use the Bluetooth data transmission function of mobile ph...[Details]
As cellular phones become more advanced, the power consumption of the system during operation and the power consumption during standby are also increasing. Therefore, the power management design of...[Details]
5. Identifiers and keywords of C language
A complete PIC microcontroller C language program usually consists of six parts: include files (i.e. header files 1, variable definitions, variable de...[Details]
PV inverter manufacturer SMA has launched its first DC arc fault circuit interrupter (AFCI) PV inverter and has received UL certification.
The new SunnyBoy AFCI inverter models include 3000-US...[Details]
Overview
In spectral measurement, photomultiplier tubes (PMT) and charge-coupled devices (CCD) are often used as photoelectric converters. PMT is used in slow-changing, high-precision spectral...[Details]
Investment in
the
medical device
industry has been on the rise in recent years. In the past two years, venture capital for medical devices has almost doubled, reaching $4 billion in 2007. Fr...[Details]
In today's body control module (BCM) designs, savvy engineers are moving away from electromechanical relays whenever possible. Their next step is to eliminate fuses. But is eliminating fuses a nece...[Details]
Abstract: In recent years, with the establishment and grid-connected power generation of a large number of solar photovoltaic power stations at home and abroad, photovoltaic grid-connected inverter...[Details]
Spatial Division Multiplexing (SDM) MIMO processing can significantly improve spectrum efficiency and thus greatly increase the capacity of wireless communication systems. Spatial Division Multip...[Details]
Recently, news came from the certification department that the photovoltaic grid-connected inverter of Samil New Energy Co., Ltd. (hereinafter referred to as "Samil New Energy") has once again obta...[Details]
Today, with energy becoming increasingly scarce, the utilization of natural energy has become the focus of people's attention. Among various natural energies, the endless solar energy is highly fav...[Details]
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
