For further information on packaging, please refer
to Appendix A
1002
Nominal
Resistance
RK73B:
3 digits
RK73H:
4 digits
RK73Z:
None
F
Resistance
Tolerance
D: ±0.5%
F: ±1%
G: ±2%
J: ±5%
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
1/24/22
50
KOA Speer Electronics, Inc.
• 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
flat chip resistors (anti-sulfuration)
applications and ratings
RK73B/RK73H
Part
Designation
Rated
Rated
T.C.R.
Power
Terminal
Ambient
(ppm/°C)
Rating
Part
Temp.
Max.
Temp.
±200
±250
––
0.03W
0 - +300
±200
0.05W
±300
±100
0.1W
±200
±100
0.1W
±200
±100
0.125W
±200
±100
125°C
70°C
0.25W
±200
±100
0.25W
±200
0.5W
±100
±200
±100
±200
±100
±200
±100
±200
Maximum Maximum Operating
RK73H
RK73B
Temp.
Working Overload
D±0.5%
G±2%
J±5%
F±1%
Voltage
Range
Voltage
E24, E96
E24
E24
E24, E96
2
100kΩ - 2MΩ
2
100kΩ - 1MΩ 100kΩ - 10MΩ
-55°C
to
––
10Ω - 91kΩ
2
10Ω - 91kΩ 10Ω - 91kΩ
20V
30V
+125°C
1Ω - 9.1Ω
1Ω - 9.1Ω
––
100 - 1M
100Ω - 100kΩ 100Ω - 1MΩ
25V
50V
––
––
10Ω - 91Ω
10Ω - 97.6Ω
—
—
100Ω - 1MΩ 10Ω - 1MΩ
1.02MΩ - 10MΩ 10Ω - 10MΩ 1Ω - 10MΩ
––
1.02kΩ - 1MΩ
1.02kΩ - 1MΩ
—
—
75V
100V
––
1.02MΩ - 10MΩ 1.1kΩ - 10MΩ 1.1kΩ - 10MΩ
—
—
100Ω - 1kΩ 10Ω - 1kΩ
10Ω - 1kΩ
1Ω - 1kΩ
––
––
—
100Ω - 1MΩ 10Ω - 1MΩ
—
150V
200V
—
1.02MΩ - 10MΩ 10Ω - 10MΩ 1Ω - 10MΩ
-55°C
100Ω - 1MΩ 10Ω - 1MΩ
—
—
to
—
1.02MΩ - 10MΩ 10Ω - 10MΩ 1Ω - 10MΩ
+155°C
100Ω - 1MΩ 10Ω - 1MΩ
—
—
—
—
10Ω - 1MΩ
1Ω - 1MΩ
10Ω - 1MΩ 10Ω - 1MΩ
—
—
1 - 9.76
200V
400V
—
1.02MΩ - 10MΩ 1Ω - 10MΩ 1Ω - 10MΩ
10Ω - 1MΩ 10Ω - 1MΩ
—
—
—
1.02MΩ - 10MΩ 10Ω - 10MΩ 1Ω - 10MΩ
10Ω - 1MΩ 10Ω - 1MΩ
—
—
—
1.02MΩ - 10MΩ 10Ω - 10MΩ 1Ω - 10MΩ
Resistance Range
1F
1H
1E
1J
2A
2B
2E
W2H
W3A
W3A2
0.75W
1W
2W
3
95°C
Rated voltage =
√Power
rating x resistance value or max. working voltage, whichever is lower
2
3
The nominal resistance value for RK73H1F (F:±1%) is E24
If you use at the rated power, please keep the condition that the terminal of the resistor is below the rated terminal part temperature. Please refer to
the derating curves based on the terminal temperature.
If any questions arise whether to use the “Rated Ambient Temperature” or the “Rated Terminal Part Temperature,” in your usage conditions, please
give priority to the “Rated Terminal Part Temperature.” Prior to use and for more details refer to “Introduction of the derating curves in the terminal
part temperature” in the beginning of the catalog.
While using under high power, the temperature of the product may increase depending on the condition of heat dissipation from PCB.
Be sure to check the terminal part temperature as well as precautions to use on delivery specification before use.
Derating Curve
RK73B-RK73H-RK73Z-RT
Ambient Temperature
% Rated Power for RK73B, RK73H
% Rated Current for RK73Z
RK73B-RK73H-RK73Z-RT
Terminal Part Temperature
% Rated Power for RK73B, RK73H
% Rated Current for RK73Z
100
80
% Rated Power
1H, 1E, 1J, 2A, 2B, 2E,
W2H, W3A (1W)
RK73B-RK73H-RT
Terminal Part Temperature W3A2
100
80
60
40
20
0
-60 -40
-55
100
80
1F
1H, 1E, 1J, 2A, 2B,
2E, W2H, W3A (1W),
W3A2 (2W)
60
40
20
0
-60 -40
-55
60
40
20
0
-60 -40
-55
-20
0
80
70
Ambient Temperature
(°C)
20
40
60
100 120
140
125
155
-20
0
100 120
140 160
125
155
Terminal Part Temperature
(°C)
40
60
80
20
-20
0
100 120 140 160
95
155
Terminal Part Temperature
(°C)
20
40
60
80
For resistors operated at an ambient temperature
of 70℃ or higher, the power (for RK73B, RK73H)
or a current rating (for RK73Z) shall be derated in
accordance with the above derating curve.
When the terminal part temperature of the resistor exceeds the rated terminal part temperature
shown above, the power shall be derated according to the derating curve.
Please refer to “Introduction of the derating curves based on the terminal part temperature” on
the beginning of our catalog before use.
6/29/20
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
KOA Speer Electronics, Inc.
• 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
I have a Freescale FreeLink mini board, and the Freelink driver has been installed successfully. I installed IAR FOR ARM, and configured it according to the manual, but I cannot debug. I found that th...
I downloaded it from Microsoft's website twice and it didn't work. I searched a lot of URLs on the Internet but they were all fake. Is there any place I can download it from? Can someone tell me a val...
I want to send MMS in arm and linux, but I can't find any relevant information. Can anyone provide me with some information or ideas? Using GPRS Modem, thank you!...
I am working on Wiegand 26 now, and I am confused. The RFID reader outputs Wiegand 26, and I plan to connect it to RS485, then convert it to RS232 and connect it to the computer to read the data. But ...
Google's driverless technology is not only an eye-catching technology, but also a subversion of the car usage model.
Those who have watched anti-terrorism films and TV dramas must have been im...[Details]
The Portable Digital Data Acquisition System (PDDAS) uses LabVIEW Real-Time and PXI to control the wind tunnel test and record air pressure data from 128 different channels.
"The LabVIEW Real-...[Details]
In recent years, the market for mobile/portable devices such as smartphones and laptops has continued to grow rapidly. While these products continue to integrate more new features to enhance the ...[Details]
1. Introduction
Light control circuit plays a vital role in urban street lamps or corridor lighting. With light control circuit, the lights can be automatically turned on and off according to ...[Details]
My colleague and I spent the day chatting in the hotel bar. We had met with several customers. We were both wondering how come these engineers we were meeting knew almost nothing about analog techn...[Details]
Overview
As a remote network communication control method with advanced technology, high reliability, complete functions and reasonable cost, CAN-bus has been widely used in various automa...[Details]
The automotive lighting and signal control system is responsible for controlling the vehicle's lighting, signal lights, electric horns, reversing and brake buzzers. Traditional automotive lighting...[Details]
In the analysis of electronic circuits, static analysis (also known as DC analysis) is the basis of circuit analysis. However, it is well known that electronic components are nonlinear, so the anal...[Details]
RS-422 and RS-485 are both serial data interface standards, which were developed and published by the Electronic Industries Association (EIA). RS-422 defines a balanced communication interface with a ...[Details]
The typical fault troubleshooting listed below is for reference of maintenance personnel.
When the computer is turned on, the indicator light is off and there is no screen display
Mainte...[Details]
Continuity test
A variety of devices need to be checked for continuity, including cable assemblies, printed circuit boards, and connectors to ensure that these components have the expected contin...[Details]
Describe how to meet the challenges of complexity with a modern wiring design toolset. Option codes and expressions can simulate the variables of an automotive project. A full-featured tool suite c...[Details]
Leakage current is generated by parasitic resistance paths between the measurement circuit and a nearby voltage source. This current can significantly reduce the accuracy of low current measurement...[Details]
Based on the actual situation, a remote intelligent anti-theft alarm device for home use, connected to the telephone line, simple to operate, and stable and reliable in operation is designed. When ...[Details]
This article introduces a high-reliability, high-power automatic water supply device made with 89C2051 single-chip microcomputer, which has phase loss detection, over-temperature detection, over-cu...[Details]
NXP MCU
京公网安备 11010802033920号
EEWORLD
