oscillators utilizes the latest generation of silicon
MEMS technology that reduces close-in noise and
provides excellent jitter and stability over a wide range
of supply voltages and temperatures. By eliminating
the need for quartz or SAW technology, MEMS
oscillators significantly enhance reliability and
accelerate product development, while meeting
stringent clock performance criteria for a variety of
communications, storage, and networking applications.
The DSC12x2/3/4 family features a control function on
pin 1 or pin 2 that permits either a standby feature
(complete power down when STDBY is low), output
enable (output is tri-stated with OE low), or a frequency
select (choice of two frequencies selected by FS
high/low). See the Product Identification System
section for detailed information.
All oscillators are available in industry-standard
packages, including the small 2.5 mm x 2.0 mm, and
are “drop-in” replacements for standard 6-pin
LVPECL/LVDS/HCSL crystal oscillators.
Package Types
DSC12x2/3/4
6-Lead CDFN/VDFN
OE/STDBY/FS
NC
GND
1
2
6
5
VDD
CLK–
CLK+
Applications
•
•
•
•
•
•
Storage Area Networks
Passive Optical Networks
10/100G Ethernet
HD/SD/SDI Video and Surveillance
PCI Express Gen 1/2/3/4
Display Port
3
4
NC
OE/STDBY/FS
GND
1
2
6
5
VDD
CLK–
CLK+
3
4
2019-2021 Microchip Technology Inc.
DS20006011C-page 1
DSC12X2/3/4
Functional Block Diagrams
Pin 1
OE/STDBY/FS
DIGITAL
CONTROL
SUPPLY
REGULATION
Pin 6
VDD
Pin 2
NC
MEMS
RESONATOR
TEMP SENSOR +
CONTROL &
COMPENSATION
PLL
OUTPUT
DIV
Pin 5
CLK–
Pin 4
CLK+
Pin 3
GND
Pin 1
NC
DIGITAL
CONTROL
SUPPLY
REGULATION
Pin 6
VDD
Pin 2
OE/STDBY/FS
MEMS
RESONATOR
TEMP SENSOR +
CONTROL &
COMPENSATION
PLL
OUTPUT
DIV
Pin 5
CLK–
Pin 4
CLK+
Pin 3
GND
DS20006011C-page 2
2019-2021 Microchip Technology Inc.
DSC12X2/3/4
1.0
ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings †
Supply Voltage .......................................................................................................................................... –0.3V to +4.0V
Input Voltage .....................................................................................................................................–0.3V to V
[i=s]This post was last edited by ddllxxrr on 2021-1-25 20:12[/i]Unboxing first:I got the impression that the courier had lost the big board. But I looked through my packaging and there wasn't any hol...
Can anyone give me an example of calling a function in an ARM subroutine? The return value of the subroutine should be MOV PC LR. What should the return value of the called function be? It would be be...
5. One type of ABS system product is only suitable for a certain type of vehicle and cannot be mixed.6. The ABS system is composed of multiple electronic components. When a fault occurs, you must be f...
The complete collection of free sample application (the most complete and effective on the whole network) The following is what I got through the search engine\the list of manufacturers on the site. I...
In 2017,
Sanan Optoelectronics
achieved sales revenue of 8.394 billion yuan, operating profit of 3.856 billion yuan, and net profit attributable to shareholders of the parent company of 3.1...[Details]
0. Preparation First use st-link to connect the stm32 core board and PC for burning St-link Stm32 3.3V 3.3V GND GND SWDIO PART SWCLK DCLK Then connect with USB serial port board to v...[Details]
With the development of information technology, intelligence, informatization and networking have become the development trend of modern industrial control. Since the 1980s, the rapid development...[Details]
When Amazon quietly launched a product called Elastic Computing Cloud 12 years ago, the Internet industry in China, across the ocean, also ushered in an unprecedented development opportunity. Let's...[Details]
STM32 has three startup modes. In RM0008 downloaded from the ST official website, you can find the startup-related configuration instructions: Translated into Chinese: The storage media corresp...[Details]
The key is the configuration of registers. The T1 timer (16 bits) of CC2530 needs to configure three registers: T1CTL, T1STAT, IRCON Here is just a brief introduction. For more details, please refer ...[Details]
MCS-51 single-chip microcomputer timer/counter experiment programming program Programming requirements: 1. Connect a light-emitting diode LED to the P1.0 pin, light up for two seconds, turn off for o...[Details]
Design a second and minute pulse generator for a single-chip microcomputer using the interrupt method. Assume that P1.0 generates a positive pulse of one machine cycle per second, and P1.1 generates ...[Details]
On January 30, the Tai'an Sports College coal-to-electricity thermal storage heating project designed and constructed by Shandong CITIC Energy successfully passed the acceptance. The acceptance tea...[Details]
According to the design requirements, the maximum voltage gain ≥ 60dB is achieved within a wide signal bandwidth (0-10MHz), and the ability to continuously adjust the gain or preset the gain in 5dB...[Details]
Recently, the 2017 Review and 2018 Outlook Seminar of the Photovoltaic Industry was held in Beijing. Sungrow, a powerful inverter technology company, was invited to attend the seminar. With 20 year...[Details]
PORT6 outputs the action control, and is externally connected to a circuit that drives 8 seven-segment displays . Write a program to display 1, 2, 3, 4, 5, 6, 7, 8 on the 8 seven-segment displays in ...[Details]
At the annual Semiconductor Strategy Symposium (ISS), semiconductor industry executives discuss semiconductor technology trends and global market developments. This article introduces the content a...[Details]
China Energy Storage Network News:
The major National Social Science Fund bidding project "China's Electricity Interconnection with Neighboring Countries - Taking Russia and Southeast Asian C...[Details]
The circuit connection is shown in the figure below: 89C51's P31 pin (TXD) is connected to 24C01's SCL pin as the clock input. 89C51's P30 pin (RXD) is connected to 24C01's SDA pin as the data read...[Details]