2512 Thick Film Chip Resistor
2512 High Voltage Chip Resistor
Thick Film, Solderable, Surface Mount Resistor
Standard Grade, Wraparound
GLASS
PASSIVATION
RESISTOR
FILM
96% ALUMINA CHIP
WRAPAROUND
TERMINATIONS
PERFORMANCE CHARACTERISTICS
TEMPERATURE RISE (°C)
22
1
W-40
M
W
22 kΩ
kΩ - 100 MΩ
- 100 MΩ
0.5%,1%, 2%, 5%,10%
±1%, ±2%, ±5%, ±10%
±1%, ±2%, ±5%, ±10%
±100, ±200, ±300 ppm
±100, ±200, ±300 ppm/°C
44.5°C/W
1500 mW
44.5 °C/W
200 Volts
1.5 W
Maximum Voltage
1200 V
(1)+/- 0.5% limited availability
Resistance Range
Resistance Range
Tolerances (1)
Tolerance
TCR
TCR
Thermal Resistance
Maximum Power
Thermal Resistance
Maximum Voltage
Maximum Power
CURRENT NOISE
POWER DISSIPATION
fiber epoxy board
ceramic board
ENVIRONMENTAL PERFORMANCE (2)
Thermal Shock
Low Temperature Operation
Short-time Overload
Resistance to Bonding Exposure
Moisture Resistance
High Temperature Exposure
Life Test
±0.03%
±0.03%
±0.03%
±0.03%
±0.05%
±0.05%
See Chart
POWER DISSIPATION (WATTS)
LIFE TEST
POWER DERATING
(2)Typical resistance change, test methods and criteria
per MIL-PRF-55342.
PART NUMBERING
S 2512 C P X 150 J 20 TR
S2512CVX1006F30
-
-TR
PACKAGING CODE: - TR = Tape/Reel - W = Waffle Carrier (Default packaging is Bulk)
TEMPERATURE CHARACTERISTIC: 10: ±100 ppm 20: ±200 ppm 30: ±300 ppm
TOLERANCE: F: 1% G: 2% J: 5% K: 10% M: 20%
RESISTANCE VALUE:
Four digits are used for tolerances of 1% or lower, three digits are used above 1%. Leading digits are significant while the last digit
specifies the number of zeros to add. The letter "R" is used to represent the decimal for fractional ohmic values. Example: 5R6 is 5.6
ohms.
TERMINATION FINISH: X: Sn60 over Nickel
Solder Over Nickel Barrier, Y: Silver
bondable-RoHS) G: Gold (Epoxy bondable-RoHS)
X: SN60 (40% Pb)
(Solderable) C: Silver bearing (Epoxy
Over Nickel Barrier (RoHS)
Y: Silver over Nickel (Solderable -RoHS) Z: Gold over Nickel (Solderable-RoHS)
PRODUCT DESIGNATION: P: Thick film on alumina U: Untrimmed alumina (10% & 20% tolerance only)
V: High Voltage
TERMINATION TYPE: C: Wraparound termination
SIZE CODE
GRADE: S: Standard Production H: High Reliability (For Screening options, contact the factory)
MECHANICAL
INCHES
MILLIMETERS
.300
MINIMUM
RECOMMENDED
MOUNTING
PADS
(INCHES)
Length
Width
Thickness
Top Term
Bottom Term
Gap
Approx. Weight
.250 (.250 - .258)
.119 (.119 - .125)
.028 (.023 - .033)
.020 (.015 - .025)
.019 (.015 - .025)
.212 (.208 - .216)
.0513 grams
6.35
3.02
0.71
0.51
0.48
5.39
(6.35 - 6.55)
(3.02 - 3.18)
(0.58 - 0.84)
(0.38 - 0.64)
(0.38 - 0.64)
(5.28 - 5.49)
.125
.202
.049
“Specifications subject to change without notice.”
STATE OF THE ART, INC.
2470 Fox Hill Road, State College, PA 16803-1797
Phone (814) 355-8004
www.resistor.com
Fax (814) 355-2714
Toll Free 1-800-458-3401
120319
02/08/08
京公网安备 11010802033920号
EEWORLD
