BU-64745G3-891 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> BU-64745G3-891

BU-64745G3-891: DescriptionMil-Std-1553 Controller, CMOS, CQFP80; CategoryThe embedded processor and controller Microcontrollers and processors; File Size2MB，98 Pages; ManufacturerData Device Corporation

Download Datasheet Parametric View All

BU-64745G3-891 Overview

Mil-Std-1553 Controller, CMOS, CQFP80

BU-64745G3-891 Parametric

Parameter Name	Attribute value
Objectid	1154987612
package instruction	QFP, QFP80,1.1SQ,40
Reach Compliance Code	compliant
Other features	SEATED HGT-CALCULATED, ALSO SUPPORTS MIL-STD-1553A
Address bus width	16
boundary scan	NO
maximum clock frequency	20 MHz
letter of agreement	MIL-STD-1553B
Data encoding/decoding methods	BIPH-LEVEL(MANCHESTER)
Maximum data transfer rate	0.125 MBps
External data bus width	16
JESD-30 code	S-CQFP-G80
length	22.35 mm
low power mode	YES
Number of serial I/Os	2
Number of terminals	80
Maximum operating temperature	70 °C
Minimum operating temperature
Package body material	CERAMIC, METAL-SEALED COFIRED
encapsulated code	QFP
Encapsulate equivalent code	QFP80,1.1SQ,40
Package shape	SQUARE
Package form	FLATPACK
power supply	5 V
Certification status	Not Qualified
Maximum seat height	3.708 mm
Maximum supply voltage	5.5 V
Minimum supply voltage	4.5 V
Nominal supply voltage	5 V
surface mount	YES
technology	CMOS
Temperature level	COMMERCIAL
Terminal form	GULL WING
Terminal pitch	1 mm
Terminal location	QUAD
width	22.35 mm
uPs/uCs/peripheral integrated circuit type	SERIAL IO/COMMUNICATION CONTROLLER, MIL-STD-1553

Preview

Download Datasheet

View All

Make sure the next

Card you purchase

has...

BU-6474X/6484X/6486X

MINI-ACE

MARK3/MICRO-ACE

*-TE

FEATURES

•

Fully Integrated 3.3 or 5.0 Volt, 1553

A/B Notice 2 Terminal

•

World’s First all 3.3 Volt Terminal

•

Transceiver Power-Down Options

•

World’s Smallest CQFP MIL-STD-1553

Device

•

80-pin Ceramic Flat/Gull Wing

Package or 324-Ball BGA Package

•

Enhanced Mini-ACE Architecture

•

Multiple Configurations:

- RT-only, 4K RAM

- BC/RT/Monitor, 4K RAM

DESCRIPTION

The Mini-ACE Mark3 and Micro-ACE-TE are the world's first MIL-STD-1553

terminals which can be powered entirely by +3.3 volts, thus eliminating the

need for a +5 volt power supply. With a package body of 0.880 inches square

and a gull wing "toe-to-toe" dimension of 1.110 inches, the Mini-ACE Mark3

is the industry's smallest ceramic gull-lead 1553 terminal. At 0.815 inches

square, the Micro-ACE-TE (BGA package) provides the smallest industry

footprint, enabling its use in applications where PC board space is at a pre-

mium.

These devices integrate dual 3.3 or 5 volt transceivers, 3.3 or 5.0 volt protocol

logic, and either 4K or 64K words of internal RAM. The architecture is identi-

cal to that of the Enhanced Mini-ACE, and most features are functionally and

software compatible with the previous Mini-ACE (Plus) and ACE genera-

tions.

A salient feature of the Mini-ACE Mark3 and Micro-ACE-TE is the advanced

bus controller architecture. This provides methods to control message sched-

uling, the means to minimize host overhead for asynchronous message

insertion, facilitate bulk data transfers and double buffering, and support

various message retry and bus switching strategies.

The remote terminal architecture provides flexibility in meeting all common

MIL-STD-1553 protocols. The choice of RT data buffering and interrupt

options provides robust support for synchronous and asynchronous messag-

ing, while ensuring data sample consistency and supporting bulk data trans-

fers. The monitor mode provides true message monitoring, and supports fil-

tering on an RT address/T-R bit/subaddress basis.

The Mini-ACE Mark3 and Micro-ACE-TE incorporate fully autonomous built-

in self-tests of internal protocol logic and RAM. The terminals provide

the

same flexibility in host interface configurations as the ACE/Mini-ACE, along

with a reduction in the host processor's worst case holdoff time.

- BC/RT/Monitor, 64K RAM

•

Supports 1553A/B Notice 2, McAir,

STANAG 3838 Protocols

•

MIL-STD-1553, McAir, and MIL-

STD-1760 Transceiver Options

•

Highly Flexible Host Side Interface

•

Compatible With Mini-ACE and ACE

Generations

•

Highly Autonomous BC with Built-In

Message Sequence Controller

•

Choice of Single, Double, and

Circular RT Buffering Options

•

Selective Message Monitor

•

Comprehensive Built-In Self-Test

•

Choice Of 10, 12, 16, or 20 MHz Clock

Inputs

•

Software Libraries and Drivers

available for Windows® 9x/2000/XP,

Windows NT®, VxWorks® and Linux

•

Available with Full Military

Temperature Range and Screening

FOR MORE INFORMATION CONTACT:

Technical

INFORMATION CONTACT:

FOR MORE

Support:

1-800-DDC-5757 ext. 7771

Technical Support:

1-800-DDC-5757 ext. 7771

Data Device Corporation

105 Wilbur Place

Bohemia, New York 11716

631-567-5600 Fax: 631-567-7358

www.ddc-web.com

subject to one or more patents pending.

All trademarks are the property of their respective owners.

The technology used in DDC’s Micro-ACE series of products may be

Recommended Resources

JZLF-11F thyristor automatic excitation device circuit

Sound and light controlled staircase delay switch circuit using op amp

Circuit diagram of a half voltage divider circuit with an additional C-MOS inverter

Several control circuits to realize jogging＿4

Sanle brand NSP-120 remote control electric heater circuit diagram

Analog multiplication and division circuit

Developing a detector based on the sensor using msp430g2553: Using msp430g2553 to obtain the measurement data based on the digital blood oxygen module and probe, the data is displayed on the nokia5110 lcd display through the serial communication driver. I don't...; zhao_金辉 Microcontroller MCU

请问：Error[e16]: Segment CSTACK (size: 0x50 align: 0x1) is too long for segment de: Error[e16]: Segment CSTACK (size: 0x50 align: 0x1) is too long for segment definition. At least 0x4 more bytes needed. The process occurred while processing thesegment placement command "-Z(DATA)CSTAC...; 刘丽军 Microcontroller MCU

Serial communication receiving and sending string problem, please take a look: My goal is to send a string k+25 to the MCU through the computer. After the MCU receives the string, it sends the two characters 25 to the computer. Although the MCU receives the string, it displays a...; FENFAXIANGSHANG 51mcu

How does DeviceIoControl know that the driver has been called? I cannot see the output of dbgview.exe: I used Delphi to make a call to my own driver (win 2k ddk), but DeviceIoControl always returns false, and I don't know whether the driver is running or not. Even if it enters the entry function, how c...; windboy121 Embedded System

Subnode restart networking problem: I use a coordinator and five sub-nodes to form a network. After the network is formed, I turn off the coordinator and then turn it on again after a while. At this time, the sub-nodes cannot be fully c...; s361021609 RF/Wirelessly

WINCE6.0 does not support SQL Server Mobile?: I read in the information that WINCE6.0 does not support SQL SERVER MOBILE. How can I port the SQL MOBILE program written on 5.0 to 6.0?...; wwwwwwx Embedded System

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components