LED-40W-HL-HV Series–
Hazardous Location, High Voltage Input Drivers
Fixed Output and Dimmable Switch Mode LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Plastic Housing
Electrical Specifications
Input Voltage Range:
Frequency:
Power Factor:
Inrush Current:
Input Current:
Maximum Power:
Current Accuracy:
Load Regulation:
THD:
Leakage Current:
Hold Up Time:
Output Protection:
347-480 Vac Nom. (312-528 V Min/Max)
50/60 Hz Nom. (47-63 Hz Min/Max)
>0.90 @ >60% load 347V, >80% load 480V
<30.0 Amps max @ 480Vac, full load, cold start 25ºC
0.14 Amps typical @ 347Vac, 60 Hz, full load
40W
± 3% Over input line variation
± 4%
< 20% @ any load, 347V/480V
_
600 µA Typical
Half Cycle
Over-Voltage, Over-Current, Short Circuit (Auto Recovery)
Environmental Specifications
Maximum Case Temp.
Minimum Starting Temp:
Storage Temperature:
Humidity:
Cooling:
Vibration Frequency:
Sound Rating:
MTBF @ 40ºC:
EMC:
Weight:
90°C
-30ºC
-40ºC to +85ºC
5% to 95%
Convection
5 to 55 Hz/2g, 30 minutes
Class A
482,000 Hours at full load, per MIL-217F Notice 2
FCC 47CFR Part 15 Class B compliant
12.9 oz (364 g)
Model Number
LED40W-130-C0300-HL-XY-HV
LED40W-114-C0350-HL-XY-HV
LED40W-100-C0400-HL-XY-HV
LED40W-089-C0450-HL-XY-HV
LED40W-072-C0550-HL-XY-HV
LED40W-057-C0700-HL-XY-HV
LED40W-048-C0830-HL-XY-HV
LED40W-045-C0900-HL-XY-HV
LED40W-040-C1000-HL-XY-HV
LED40W-036-C1100-HL-XY-HV
LED40W-030-C1400-HL-XY-HV
LED40W-024-C1670-HL-XY-HV
LED40W-022-C1820-HL-XY-HV
LED40W-018-C2200-HL-XY-HV
LED40W-015-C2680-HL-XY-HV
LED40W-013-C3080-HL-XY-HV
LED40W-012-C3330-HL-XY-HV
LED40W-010-C4000-HL-XY-HV
LED40W-009-C4450-HL-XY-HV
• Total Power: 40 Watts
• Input Voltage: 347-480 Vac Nom.
• UL Dry & Damp Location Rated
• IP66
• High Power Factor
• UL Type HL, with V5A Case and
internal thermal protection
• Rated for Hazardous Locations
Constant Current - Product Specifications
Output Current Output Voltage Max Output
Typical
(mA ±5%)
Range
(Vdc)
Power
(W)
Efficiency
300
350
400
450
550
700
830
900
1000
1100
1400
1670
1820
2200
2680
3080
3330
4000
4450
44-130
38-114
33-100
30-89
24-72
20-57
16-48
16-45
13-40
12-36
10-30
8-24
7-22
6-18
5-15
4-13
4-12
3-10
3-9
39.0
39.9
40
40
39.6
40
39.8
40
40
39.6
42
40
40
39.6
40
40
40
40
40
86%
86%
85%
85%
84%
83%
83%
83%
82%
82%
82%
82%
82%
81%
81%
81%
81%
81%
80%
-X indicates lead options. B for bottom leads, S for side leads.
-Y
indicates dimming options are available. See options below. Blank = fixed current output
Ordering Options:
-D: Dimmable model dims 100-10%. Two extra wires on the output side: +Purple/-Gray. It offers
0-10V & Resistance dimming, compatible with most quality 0-10V dimmers. See page 3.
-P: PWM dimmable version dims 100-10%. Two extra wires on the output side: +Purple/-Gray.
It is PWM Dimmable via a positive duty cycle, 200Hz to 1KHz, 0-10V Pulse. See page 4.
Constant Voltage - Product Specifications
Model Number
LED40W-009-HL-X-HV
LED40W-010-HL-X-HV
LED40W-012-HL-X-HV
LED40W-013-HL-X-HV
LED40W-015-HL-X-HV
LED40W-018-HL-X-HV
LED40W-022-HL-X-HV
LED40W-024-HL-X-HV
LED40W-030-HL-X-HV
LED40W-036-HL-X-HV
LED40W-040-HL-X-HV
Output Voltage
(Vdc ±5%)
9
10
12
13
15
18
22
24
30
36
40
45
48
57
72
89
100
114
130
Output Current
Range
(mA)
1113-4450
1000-4000
825-3330
770-3080
670-2680
550-2200
455-1820
418-1670
350-1400
275-1100
250-1000
225-900
208-830
175-700
138-550
113-450
100-400
75-350
75-300
Max Output
Power
(W)
40
40
40
40
40
39.6
40
40
42
39.6
40
40
39.8
40
39.6
40
40
39.9
39.0
Class 2:
Typical
Efficiency
82%
83%
83%
84%
84%
84%
85%
85%
85%
85%
85%
85%
85%
85%
85%
86%
86%
86%
87%
US/Canada
E332160
LED40W-045-HL-X-HV
LED40W-048-HL-X-HV
LED40W-057-HL-X-HV
LED40W-072-HL-X-HV
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
LED40W-089-HL-X-HV
LED40W-100-HL-X-HV
LED40W-114-HL-X-HV
LED40W-130-HL-X-HV
Rev 8-26-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LED40W-HL-HV Series
SSL Solutions Faster Than The Speed Of Light
®
Pg 2 of 4
Dimensions - Inches (mm)
Standard “-BY” Bottom Leads Configuration:
3.78 [96]
0.39 [10]
“-SY” Optional Side Leads Configuration:
3.78 [96]
0.39 [10]
0.39 [10.0]
1.2 [30.5]
2.8 [71]
1.89 [48]
1.18 [30]
1.89 [48]
1.18 [30]
5.91 Min [150 Min]
AC IN
White (N)
Black (L)
DC OUT
Red (+)
Blue (-)
Dimming
Purple (+)
Gray (-)
1.4 [35.6]
0.16 [4]
0.39±0.04 [10±1]
0.39±0.04 [10±1]
0.39±0.04 [10±1]
5.91 Min [150 Min]
1.4 [35.6]
DC OUT
Red (+)
Blue (-)
Dimming
Purple (+)
Gray (-)
WIRE SPECS:
Input Leads:
18 AWG, rated 600 V, 105C, min.
Output Leads:
18 AWG, rated 300 V, 105C, min.
Dimming Leads:
22 AWG, rated 300 V, 105C.
All wires are stranded with solder dipped ends.
1.00
0.95
0.90
0.85
Power Factor / Load
30%
25%
95%
90%
85%
80%
75%
Typical Efficiency / Load
THD / Load
130
115
Lifetime / Case Temperature
Lifetime
(kHrs)
Efficiency
20%
347 Vac
480 Vac
90
75
60
45
30
15
0.80
0.75
0.70
0.65
0.60
35%
60%
80%
100%
347 Vac
480 Vac
THD
PF
15%
10%
5%
347 Vac
480 Vac
60%
60%
80%
80%
100%
100%
Load
70%
0%
35%
35%
0
45
50
Normalized Output Voltage
Load
Case Hotspot Temperature
(°C)
55
60
65
70
75
0.16 [4]
80
85
AC IN
White (N)
Black (L)
5.91 Min [150 Min]
90
0.14 [3.6]
0.2 [5]
0.14 [3.6]
0.2 [5]
Safety and EMC Compliance
UL/CUL
CE
FCC, 47CFR Part 15
EN 55015
EN61000-3-2
EN61000-3-3
EN61000-4-5
UL8750, CAN/CSA-C22.2 No. 250.13-12,
UL1310 & CAN/CSA-22.1 No. 223-M91 (for Class 2),
UL1012/CS-C22.2 No.107.1 (for Non-Class 2)
EN 61347-1, EN 61347-2-13
Class B
> 80% Rated Power
Class C
2kV/4kV
Note:
Life calculations are based on reliability with confidence using
a 90% confidence level and <5% failure rate. At a confidence
level of 90% it is expected that <5% of the parts will fail at
the rated life provided. (Failure is defined as a driver drifting
outside specification, rather than fail to operate)
UL Conditions of Acceptability
See website for additional information
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
2.8 [71]
Tc = 90°C max
Tc = 90°C max
0.39 [10.0]
1.2 [30.5]
LED40W-HL-HV Series
SSL Solutions Faster Than The Speed Of Light
®
Pg 3 of 4
“-D” Option: 0-10VDC and Resistance Dimming
Parameters
Source Current out of 0-10V Purple Wire
Absolute Voltage Range on 0-10V (+) Purple Wire
Minimum
0 mA
-2.0 V
Typical
—-
—-
Maximum
2 mA
+15 V
“-D” Typical Dimming Circuit
Dim (+) Purple
LED40W-xxx-Cxxxx-HL-D-HV
IP710
Wall Dimmer
Dim (-) Gray
(Dimmer must be current-sink type control)
100
90
80
70
60
50
40
30
20
10
0
Output Current / 0-10VDC Dimming Control Voltage
Output Current %
0V
1V
2V
3V
Purple-to-Gray Voltage
(Vdc)
4V
5V
6V
7V
8V
9V
10V
Notes:
1.
2.
3.
4.
D dimmable version comes with an extra two wires on the output side: +Purple/-Gray.
Compatible with most 0-10V dimmers. Recommended dimmer is Leviton IP710 or equivalent.
D & D3 dimmable versions are not intended to dim below about 5% @ 0V or 10% @ 1.0V.
Output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LED40W-HL-HV Series
SSL Solutions Faster Than The Speed Of Light
®
Pg 4 of 4
“-P” Option: PWM Dimming
Parameters
Absolute Maximum Voltage Range on PWM Input (Purple Wire)
Input LOW Level Voltage Range (Purple Wire)
Input HIGH Level Voltage Range (Purple Wire)
Sink Current into PWM Input (Purple Wire)
Source Current out of PWM Input (Purple Wire)
PWM Input Signal Frequency
PWM Input Signal Positive Duty Cycle
Minimum
-2.0V
-2.0V
+9.0V
0mA
0mA
500Hz
0%
Typical
10V
0V
10V
—-
—-
—-
10-90%
Maximum
+15V
+5.5V
+15V
1.2mA
2mA
1500Hz
100%
“-P” PWM Positive Dimming Typical Circuit
PWM (+) Purple
LED40W-XX-CXXXX-HL-P-HV
PWM In
PWM (-) Gray
100
90
80
70
60
50
40
30
20
10
0
Output Current / 1.0kHz Positive Duty Cycle
Output Current %
0%
10%
20%
30%
Positive Duty Cycle
40%
50%
60%
70%
80%
90%
100%
Notes:
1. PD dimmable version comes with an extra 2 wires on the output side for PWM type dimming: +Purple/-Gray.
2. Below 10% Duty cycle proper dimming operation is not assured. Unit is not intended to turn off at <10% Duty Cycle.
3. Output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
京公网安备 11010802033920号
EEWORLD
