CERAMIC CAPACITORS
TCE / TCX / TCN / TXR
Taping : dimensionsMolded Series
Radial Molded Capacitors
In accordance with the specifications of
CECC 30700
and
NF C 83132
standards
TCN 50/60 R : Enhanced reliability types of TCN 50 A and TCN 60 A.
FEATURES
• Radial molded capacitors
• NPO, BX, 2C1, X7R dielectrics
• Capacitance range: 0.5pF to 4.7µF
• RoHS and Non RoHS compliant capacitors available
ELECTRICAL SPECIFICATIONS
Description
Dielectric code
Operating temperature
Climatic category
NPO
CE
BX
CX
–55°C to +125°C
55 / 125 / 56
25V
DC
to 500V
DC
2C1
CN
X7R
XR
PHYSICAL CHARACTERISTICS
CONSTRUCTION
Leaded MLCC capacitors for through-hole mounting:
Epoxy molded capacitors
MARKING
Capacitance, tolerance, voltage, dielectric, date code.
Rated voltage (U
RC
)
Max. ∆C/°C over temperature range
without DC voltage applied
Maximum ∆C/°C over temperature
range with rated voltage applied
Temperature coefficient with or
without DC voltage applied
Dielectric withstanding voltage
Capacitance
Dissipation factor at 25°C
Insulation resistance at 25°C
Aging
None
at 1MHz for C ≤ 1,000pF
at 1kHz for C > 1,000pF
NA
NA
(0±30)ppm/°C
±15%
±20%
±15%
NA
NA
+15% –25% +20% –30%
NA
2.5 U
RC
at 1MHz for C ≤ 100pF
at 1kHz for C > 100pF
NA
≤ 0.015 (150/C + 7)% at 1MHz for C ≤ 50pF
≤0.15% at 1MHz for 50pF < C ≤ 1,000pF
≤0.15% at 1kHz for C > 1,000pF
≤2.5% at 1MHz for C ≤ 100pF
≤2.5% at 1kHz for C > 100pF
≥ 100,000 MΩ for C ≤ 10nF
≥ 1,000 MΩ.µF for C > 10nF
≤ 2.5% per decade hour
HOW TO ORDER
T
Series
T
= Radial
leaded,
molded
capacitor
CE
Dielectric
CE
= NPO
CX
= BX
CN
= 2C1
XR
= X7R
61
Size
50
60
61
61N
62
62N
63
64
A
Bismuth
-
= For all
models
A
= Bismuth
free for
50/60
sizes only
(tg
d
at–55°C
≤350.10
–4
)
W
RoHS compliant
-
= No RoHS
W
= RoHS
compliant
F
Quality level
-
= standard quality
level
F
= Hi-Rel quality:
screening in
accordance with
Exxelia specification
6.8nF
Capacitance
Capacitance
value in clear
10%
Tolerance
NPO:
cap. value ≤ 12pF
±0.25pF
cap. value ≤ 8.2pF
±0.5pF
±1pF
cap. value > 22pF
±1%
cap. value > 12pF
±2%
cap. value > 8.2pF
±5%
±10%
cap. value > 3.9pF
±20%
Available for BX, 2C1
and X7R:
±5%
±10%
±20%
25V
Rated voltage
25V
50V
100V
200V
500V
Intermediary
and higher voltages
available on request.
B
Packaging
-
= Exxelia packaging
Available for quantity
≥ 500:
B
= reel
-
Reliability level
For F parts only.
Acc. to Exxelia
spec.
-
T5
T6
See page 15
www.exxelia.com
34
info@exxelia.com
Page revised 06/20
CERAMIC CAPACITORS
Radial Molded Capacitors
DIMENSIONS in inches (mm)
Size 50
TCE / TCX /General characteristics
TCN / TXR Molded Series
Sizes 61, 61N, 62, 62N, 63
Sizes 60, 64
STANDARD RATINGS
Size
L
61
0.138 ± 0.02
(3.5 ± 0.5)
0.178 max
(4.5 max)
0.098 ± 0.008
(2.5 ± 0.2)
0.1 ± 0.008
(2.54 ± 0.2)
0.024
(0.6)
NPO
CE
1pF
6.8nF
3.3nF
2.7nF
1.5nF
390pF
270pF
100pF
220nF
56nF
33nF
12nF
3.3nF
1.8nF
-
BX
CX
2C1
CN
27pF
220nF
82nF
47nF
22nF
5.6nF
3.9nF
560pF
61N
62
0.197 ± 0.02
(5 ± 0.5)
0.237 max
(6 max)
0.098
(2.5 ± 0.2)
0.1 ± 0.008
(2.54 ± 0.2)
0.024
(0.6)
X7R
XR
220nF
100nF
68nF
39nF
10nF
6.8nF
1.2nF
50
NPO
CE
1pF
33nF
15nF
12nF
6.8nF
1.8nF
1.2nF
470pF
820nF
220nF
150nF
56nF
15nF
8.2nF
-
BX
CX
2C1
CN
33pF
1µF
390nF
220nF
120nF
27nF
18nF
3.3nF
62N
63
0.295 ± 0.02
(7.5 ± 0.5)
0.335 max
(8.5 max)
0.098
(2.5 ± 0.2)
0.2 ± 0.008
(5.08 ± 0.2)
0.024
(0.6)
X7R
XR
1µF
470nF
330nF
180nF
47nF
27nF
4.7nF
NPO
CE
4.7pF
68nF
47nF
39nF
18nF
6.8nF
4.7nF
2.2nF
1.8µF
1µF
560nF
220nF
56nF
33nF
-
BX
CX
2C1
CN
330pF
1.8µF
1.2µF
1µF
470nF
100nF
68nF
10nF
1.8µF
1.2µF
1µF
680nF
180nF
120nF
22nF
60
0.295 ± 0.02
(7.5 ± 0.5)
0.295 ± 0.008
(7.5 ± 0.2)
0.098 max.
(2.5 max.)
0.2 ± 0.008
(5.08 ± 0.2)
0.024
(0.6)
X7R
XR
NPO
CE
220pF
180nF
120nF
100nF
56nF
22nF
15nF
6.8nF
4.7µF
2.7µF
1.8µF
680nF
180nF
100nF
-
BX
CX
64
0.394 ± 0.02
(10 ± 0.5)
0.434 max
(11 max)
0.138
(3.5)
0.2 ± 0.008
(5.08 ± 0.2)
0.031
(0.8)
2C1
CN
4.7nF
4.7µF
3.9µF
2.7µF
1.2µF
330nF
220nF
47nF
4.7µF
3.9µF
2.7µF
1.8µF
560nF
330nF
82nF
X7R
XR
W
Dimensions
inches (mm)
T
X
0.2 ± 0.008
(5.08 ± 0.2)
0.2 ± 0.008
(5.08 ± 0.2)
Ø ± 10%
Dielectric
Dielectric code
Min. Cap. value
25V
Rated voltage (U
RC
)
50V
63V
100V
200V
250V
500V
Size
L
Dimensions
inches (mm)
W
T
X
Ø ± 10%
0.197 ± 0.02
(5 ± 0.5)
0.197 ± 0.008
(5 ± 0.2)
0.098 max.
(2.5 max.)
0.2 ± 0.008
(5.08 ± 0.2)
0.024
(0.6)
NPO
CE
1pF
27nF
12nF
10nF
5.6nF
1.5nF
1.2nF
390pF
820nF
220nF
120nF
47nF
12nF
6.8nF
-
BX
CX
2C1
CN
10pF
820nF
270nF
180nF
100nF
22nF
15nF
1.8nF
820nF
390nF
270nF
150nF
39nF
27nF
4.7nF
X7R
XR
NPO
CE
4.7pF
56nF
39nF
27nF
15nF
5.6nF
3.9nF
1.5nF
1.5µF
1µF
470nF
180nF
39nF
27nF
-
BX
CX
Dielectric
Dielectric code
Min. Cap. value
25V
Rated voltage (U
RC
)
50V
63V
100V
200V
250V
500V
2C1
CN
330pF
1.5µF
1µF
1µF
390nF
82nF
56nF
8.2nF
X7R
XR
1.5µF
1µF
820nF
560nF
150nF
100nF
15nF
Available capacitance values:
NPO: E6, E12, E24, E48, E96 (see page 14). Specific values upon request.
X7R: E6, E12, E24 (see page 14). Specific values upon request.
The above table defines the standard products, other components may be built upon request.
www.exxelia.com
35
info@exxelia.com
Page revised 06/20
STANDARD
CERAMIC CAPACITORS
General Information
Taping : dimensions NPO/COG (Class 1)
COMPOSITION
NPO capacitors are produced by using a dielectric made of titanium dioxide
(Ti O
2
) modified by magnesium oxide Mg O (white ceramics) or a rare earth
oxide, e.g. Nd
2
O
3
(other NPO ceramics).
As a consequence, these ceramics are non ferro-electric materials with a low
dielectric constant (
ε
r ≤ 110).
Other additives are used to dope the dielectric constant up to 300. Though der-
ogating from CG class, doped dielectric constant features a linear temperature
drift and a matchless stability compared with class 2 ceramics.
The wide range of possible NPO dielectric compositions enables to use the ma-
terial best suited to the application :
• standard applications,
• high voltage,
• high temperature,
• microwave,
• power capacitors.
«Temperature coefficient» compositions are particularly suitable for imped-
ance matching. These ceramics usually enable to achieve temperature coef-
ficients from 0 to –1 000 ppm/°C. For specific requirements, other coefficients
can be achieved (e.g. –3 300 ppm/°C).
TEMPERATURE COEFFICIENT
kV
+ 100
0
– 33
– 75
– 150
– 220
– 330
– 470
– 750
– 1 000
Temperature coefficient kV(ppm/°C)
Tolerances
Code letter
± 30
AG
± 30
CG
± 30
HG
± 30
LG
± 30
PG
± 30
RG
± 60
SH
± 60
TH
± 120
UJ
± 250
QK
STABILITY
As
ε
r is low, these dielectrics are extremely stable with only minor changes
under such stresses as :
• temperature,
• voltage,
• frequency.
In addition, they are not affected by piezo-electric phenomena and their dielec-
tric absorption coefficients are low and even non measurable for dielectrics
with the lowest constants.
MECHANICAL PROPERTIES
Class 1 ceramics are the perfect match for metallic electrodes made of Pd or
Ag-Pd alloy and have a high hardness and mechanical toughness making them
resistant to thermal shocks (wave soldering for instance) and to thermal cy-
cling after mounting on substrates having an expansion coefficient close to
the capacitor one.
Ceramic chips meet CECC 32100 and NF C 93133 standards.
CLIMATIC CATEGORIES
Climatic categories are identified by three-digit codes as per NF C 20700 stan-
dard. Coding method is described in table 6.
e.g. : – 55°C + 125°C / 56 days category is identified by code 434.
www.exxelia.com
18
info@exxelia.com
Page revised 06/20
CERAMIC CAPACITORS
General Information NPO/COG (Class 1)
General characteristics
IMPEDANCE VERSUS FREQUENCY
DISSIPATION FACTOR VERSUS FREQUENCY
10
4
1
0.5
10 pF
F
100 p
10
0n
F
10
nF
1n
F
Dissipation factor (%)
Impedance (m )
0.2
0.1
0.05
10
2
10
0.02
1
10
10
2
10
3
Frequency (kHz)
10
4
10
5
10
6
10
7
0.01
1
2
5
10
2
5
Frequency (kHz)
10
2
2
5
10
3
CAPACITANCE CHANGE VERSUS TEMPERATURE
0.5
0.4
0.3
0.2
Typical
Standard limits
IR VERSUS TEMPERATURE
10
4
5
Insulation resistance (G )
2
10
3
5
2
∆C/C (%)
0.1
0
10
2
–0.1
–0.2
–0.3
5
2
10
5
2
–0.4
–0.5
–55 –35 –15 5
25 45 65 85 105 125 145
1
-55 -40
0
20
85
125
155
Temperature (°C)
Temperature (°C)
DISSIPATION FACTOR VERSUS TEMPERATURE
TYPICAL FAILURE RATE VERSUS TEMPERATURE
0.05
10
–7
5
Dissipation factor (%)
0.04
2
10
–8
l
(failure/h)
5
0.03
1.5
2
–9
0.02
10
5
2
0.01
–55 –40
0
20
85
125
155
10
–10
1
0.9
0.8
0.7
0.6
0.5
20
40
60
80
100
125
Temperature (°C)
Temperature (°C)
www.exxelia.com
19
info@exxelia.com
Page revised 06/20
STANDARD
10
3
CERAMIC CAPACITORS
General Information
Taping : dimensions X7R (Class 2)
COMPOSITION
Class 2 capacitors are produced by using a dielectric made of barium titanate
(Ba Ti O
3
). By nature, the dielectric is a ferroelectric compound with a high di-
electric constant usually varying :
• from 1 000 to 5 000 - typical of capacitors meeting 2C1 type specifica-
tions (BX, X7R),
• from 5 000 to 15 000 - typical of capacitors meeting Z5U or Y5V type
specifications.
Depending on whether the dielectric contains a flux additive, mainly bismuth
or boron, electrodes are made of Ag-Pd alloys with high silver content or high
palladium content, even pure palladium in some cases.
Stability category
Code letter
B
C
D
E
R
X
CAPACITANCE/TEMPERATURE RELATIONSHIP
Capacitance variations are defined within a specified temperature range, +
20°C being the reference temperature. This characteristic is expressed by as-
sociating the temperature range and capacitance stability.
Max. capacitance variation (%)
with reference to capacitance at 20°C
At rated DC voltage
Without voltage
(U
DC
)
± 10
+ 10– 15
± 20
+ 20 – 30
+ 20 – 55
+ 15 – 15
+ 15 – 15
+ 20 – 30
+ 20 – 40
+ 20 – 65
Not applicable
+ 15 – 25
STABILITY
As the dielectric is a ferro-electric material, class 2 capacitors present signifi-
cant variations under such stresses as :
• temperature,
• voltage,
• frequency.
In addition, the dielectric absorption coefficient can reach a few % and
piezo-electric phenomena can affect the dielectric at critical frequencies (full
information and specific documents available on request).
Temperature category
Code
1
2
4
Temperature range
– 55°C +125°C
– 55°C + 85°C
– 25°C + 85°C
MECHANICAL PROPERTIES
Class 2 dielectrics are hard materials and are sensitive to thermo-mechanical
stress. Stress should be limited when mounting and adequate substrates with
an adapted expansion coefficient used.
BISMUTH OR BISMUTH FREE DIELECTRICS
Class 2 capacitors are made of ceramics capable to embed a flux element (e.g.
bismuth or boron salt).Their eventual use will affect the choice of electrode
alloys firing temperature used. Capacitor behavior under such constraints as
temperature, voltage, frequency and even reliability, in some applications (fur-
ther information available on request), is also different.
That is why French and European standard authorities have decided to
differentiate bismuth from bismuth free ceramics by measuring tangent
d
at
–55°C. Tangent Tg
d
(–55°C) 350.10
–4
in flux free dielectrics.
Flux free dielectrics are identified by suffix «A» after capacitor type (e.g.
CNC2A).
CAPACITANCE CHANGE VERSUS FREQUENCY
5
0
∆C/C
(%)
–5
– 10
5
1
2
5
Frequency (kHz)
10
2
5
10
2
2
5
10
3
www.exxelia.com
20
info@exxelia.com
Page revised 06/20
京公网安备 11010802033920号
EEWORLD
