For further information on packaging, please refer
to Appendix A
1002
Nominal
Resistance
RK73B:
3 digits
RK73H:
4 digits
RK73Z:
None
F
Resistance
Tolerance
D: ±0.5%
F: ±1%
G: ±2%
J: ±5%
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
1/24/22
50
KOA Speer Electronics, Inc.
• 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
flat chip resistors (anti-sulfuration)
applications and ratings
RK73B/RK73H
Part
Designation
Rated
Rated
T.C.R.
Power
Terminal
Ambient
(ppm/°C)
Rating
Part
Temp.
Max.
Temp.
±200
±250
––
0.03W
0 - +300
±200
0.05W
±300
±100
0.1W
±200
±100
0.1W
±200
±100
0.125W
±200
±100
125°C
70°C
0.25W
±200
±100
0.25W
±200
0.5W
±100
±200
±100
±200
±100
±200
±100
±200
Maximum Maximum Operating
RK73H
RK73B
Temp.
Working Overload
D±0.5%
G±2%
J±5%
F±1%
Voltage
Range
Voltage
E24, E96
E24
E24
E24, E96
2
100kΩ - 2MΩ
2
100kΩ - 1MΩ 100kΩ - 10MΩ
-55°C
to
––
10Ω - 91kΩ
2
10Ω - 91kΩ 10Ω - 91kΩ
20V
30V
+125°C
1Ω - 9.1Ω
1Ω - 9.1Ω
––
100 - 1M
100Ω - 100kΩ 100Ω - 1MΩ
25V
50V
––
––
10Ω - 91Ω
10Ω - 97.6Ω
—
—
100Ω - 1MΩ 10Ω - 1MΩ
1.02MΩ - 10MΩ 10Ω - 10MΩ 1Ω - 10MΩ
––
1.02kΩ - 1MΩ
1.02kΩ - 1MΩ
—
—
75V
100V
––
1.02MΩ - 10MΩ 1.1kΩ - 10MΩ 1.1kΩ - 10MΩ
—
—
100Ω - 1kΩ 10Ω - 1kΩ
10Ω - 1kΩ
1Ω - 1kΩ
––
––
—
100Ω - 1MΩ 10Ω - 1MΩ
—
150V
200V
—
1.02MΩ - 10MΩ 10Ω - 10MΩ 1Ω - 10MΩ
-55°C
100Ω - 1MΩ 10Ω - 1MΩ
—
—
to
—
1.02MΩ - 10MΩ 10Ω - 10MΩ 1Ω - 10MΩ
+155°C
100Ω - 1MΩ 10Ω - 1MΩ
—
—
—
—
10Ω - 1MΩ
1Ω - 1MΩ
10Ω - 1MΩ 10Ω - 1MΩ
—
—
1 - 9.76
200V
400V
—
1.02MΩ - 10MΩ 1Ω - 10MΩ 1Ω - 10MΩ
10Ω - 1MΩ 10Ω - 1MΩ
—
—
—
1.02MΩ - 10MΩ 10Ω - 10MΩ 1Ω - 10MΩ
10Ω - 1MΩ 10Ω - 1MΩ
—
—
—
1.02MΩ - 10MΩ 10Ω - 10MΩ 1Ω - 10MΩ
Resistance Range
1F
1H
1E
1J
2A
2B
2E
W2H
W3A
W3A2
0.75W
1W
2W
3
95°C
Rated voltage =
√Power
rating x resistance value or max. working voltage, whichever is lower
2
3
The nominal resistance value for RK73H1F (F:±1%) is E24
If you use at the rated power, please keep the condition that the terminal of the resistor is below the rated terminal part temperature. Please refer to
the derating curves based on the terminal temperature.
If any questions arise whether to use the “Rated Ambient Temperature” or the “Rated Terminal Part Temperature,” in your usage conditions, please
give priority to the “Rated Terminal Part Temperature.” Prior to use and for more details refer to “Introduction of the derating curves in the terminal
part temperature” in the beginning of the catalog.
While using under high power, the temperature of the product may increase depending on the condition of heat dissipation from PCB.
Be sure to check the terminal part temperature as well as precautions to use on delivery specification before use.
Derating Curve
RK73B-RK73H-RK73Z-RT
Ambient Temperature
% Rated Power for RK73B, RK73H
% Rated Current for RK73Z
RK73B-RK73H-RK73Z-RT
Terminal Part Temperature
% Rated Power for RK73B, RK73H
% Rated Current for RK73Z
100
80
% Rated Power
1H, 1E, 1J, 2A, 2B, 2E,
W2H, W3A (1W)
RK73B-RK73H-RT
Terminal Part Temperature W3A2
100
80
60
40
20
0
-60 -40
-55
100
80
1F
1H, 1E, 1J, 2A, 2B,
2E, W2H, W3A (1W),
W3A2 (2W)
60
40
20
0
-60 -40
-55
60
40
20
0
-60 -40
-55
-20
0
80
70
Ambient Temperature
(°C)
20
40
60
100 120
140
125
155
-20
0
100 120
140 160
125
155
Terminal Part Temperature
(°C)
40
60
80
20
-20
0
100 120 140 160
95
155
Terminal Part Temperature
(°C)
20
40
60
80
For resistors operated at an ambient temperature
of 70℃ or higher, the power (for RK73B, RK73H)
or a current rating (for RK73Z) shall be derated in
accordance with the above derating curve.
When the terminal part temperature of the resistor exceeds the rated terminal part temperature
shown above, the power shall be derated according to the derating curve.
Please refer to “Introduction of the derating curves based on the terminal part temperature” on
the beginning of our catalog before use.
6/29/20
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
KOA Speer Electronics, Inc.
• 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
[i=s] This post was last edited by iloveukulele on 2014-4-16 19:06 [/i] [backcolor=rgb(238, 238, 238)][font=Tahoma, Helvetica, SimSun, sans-serif][size=12px]MSP430 G2 Series LaunchPad with Touch Scree...
CString DelPath = CString(FileName) + CString("\0");\\Add "\0" to the dynamic path LPCWSTR pFrom = DelPath.AllocSysString();\\Convert CString to LPCWSTR type Because I want to use SHFileOperation() fu...
[b]Contents: [/b] Chapter 1 Complex Functions Chapter 2 Fourier Series and Fourier Integral Chapter 3 Vector Operations Chapter 4 Matrix Computations Chapter 5 Basic Concepts of Tensors and Their Appl...
I am working on a problem and have run into difficulties. I am at a loss for ideas and would like to seek advice from experts. The input data is a DTMF signal (the superposition of two sine waveforms)...
China's new energy vehicles are in a transition period from research and development to real industrial development. In 2012, with the intensive launch of new energy vehicle policy planning, the de...[Details]
0. Introduction
In daily life, we often see some special-purpose vehicles. When these vehicles pass through intersections, they often obtain the right of way at intersections by temporarily op...[Details]
In public places such as schools, government agencies, factories and mines, as well as public corridors in residential areas, the phenomenon of long-burning lights is very common, which causes a h...[Details]
This paper establishes a fuel cell engine test platform based on the NI integrated hardware and software environment. This platform can realize the test and control of fuel cell engines and their a...[Details]
Continuity test
A variety of devices need to be checked for continuity, including cable assemblies, printed circuit boards, and connectors to ensure that these components have the expected contin...[Details]
LED lighting: Basic circuit design can be completed in as little as one day
Semiconductor manufacturers are also getting involved in the LED lighting business. The power circuit of LED req...[Details]
Since the late 1990s, with the demand for higher system efficiency and lower power consumption, the technological update of telecommunications and data communication equipment has promoted the deve...[Details]
The ARINC429 bus is one of the most commonly used communication buses between various subsystems of avionics. As the "skeleton" of modern avionics systems, once the bus system or the attached airbo...[Details]
LED is now known as the fourth generation of light sources. High-power LED has many advantages over traditional light sources in outdoor lighting.
1 LED lamps have high light efficiency
C...[Details]
Among the uses of electrical energy, lighting accounts for a considerable proportion. Compared with the earlier ordinary incandescent lamps, the fluorescent lamps and energy-saving lamps we commonl...[Details]
Movpower is a portable power bank. It can charge most mobile phones and digital products, such as digital cameras, PDAs, and mobile phones such as Apple, iPod, Blackberry, Motorola, Samsung, Nokia,...[Details]
Rated capacity refers to the maximum output power of the UPS (the product of voltage V and current A).
Usually, the UPS power supplies sold on the market are marked with "W" (watt) for smaller...[Details]
This article focuses on closing the feedback loop of an isolated power supply using a TL431 shunt regulator. The article discusses a method to extend the bandwidth of the power supply control loop ...[Details]
Based on the actual situation, a remote intelligent anti-theft alarm device for home use, connected to the telephone line, simple to operate, and stable and reliable in operation is designed. When ...[Details]
When designing a PLC system, the control scheme should be determined first, and the next step is to select the PLC engineering design. The characteristics of the process and the application require...[Details]
Buy&Sell
京公网安备 11010802033920号
EEWORLD
