5962-88735001LA datasheet, PDF

Datasheet> All Categories > storage> storage> 5962-88735001LA

5962-88735001LA: DescriptionOTP ROM,; Categorystorage storage; File Size93KB，15 Pages; ManufacturerSTMicroelectronics; Websitehttp://www.st.com/

Download Datasheet Parametric View All

5962-88735001LA Overview

OTP ROM,

5962-88735001LA Parametric

Parameter Name	Attribute value
Objectid	1460347660
package instruction	,
Reach Compliance Code	unknown
ECCN code	EAR99
Memory IC Type	OTP ROM
Certification status	Not Qualified

Preview

Download Datasheet

View All

REVISIONS

LTR

DESCRIPTION

Change to table I, parameter t

PWC

. Removed programming

requirements. Editorial changes throughout.

Changes in accordance with NOR 5962-R006-91

Changes in accordance with NOR 5962-R229-93

Drawing updated to reflect current requirements. Removed

programming logic from truth table. Editorial changes throughout. -

gap

5 year review and update. Changed input and output capacitance

from 6 pF to 10 pF and 8 pF to 10 pF respectively. ksr

DATE (YR-MO-DA)

89-09-11

APPROVED

Michael A. Frye

91-09-24

93-09-21

01-01-05

Michael A. Frye

Raymond Monnin

06-06-06

Raymond Monnin

THE FRONT PAGE OF THIS DRAWING HAS BEEN REPLACED

REV

SHEET

REV

SHEET

REV STATUS

OF SHEETS

PMIC N/A

REV

SHEET

PREPARED BY

James E. Jamison

CHECKED BY

Charles Reusing

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43218-3990

http://www.dscc.dla.mil

STANDARD

MICROCIRCUIT

DRAWING

THIS DRAWING IS AVAILABLE

FOR USE BY ALL

DEPARTMENTS

AND AGENCIES OF THE

DEPARTMENT OF DEFENSE

APPROVED BY

Michael A. Frye

DRAWING APPROVAL DATE

89-01-13

MICROCIRCUIT, MEMORY,

DIGITAL, CMOS, 2K X 8 BIT, ONE

TIME PROGRAMMABLE (OTP)

REGISTERED PROM,

MONOLITHIC SILICON

SIZE

SHEET

CAGE CODE

AMSC N/A

REVISION LEVEL

67268

1 OF

5962-88735

5962-E482-06

DSCC FORM 2233

APR 97

2. APPLICABLE DOCUMENTS

2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part

of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATION

MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for.

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-883 -

MIL-STD-1835 -

Test Method Standard Microcircuits.

Interface Standard Electronic Component Case Outlines.

DEPARTMENT OF DEFENSE HANDBOOKS

MIL-HDBK-103 -

MIL-HDBK-780 -

List of Standard Microcircuit Drawings.

Standard Microcircuit Drawings.

(Copies of these documents are available online at

http://assist.daps.dla.mil/quicksearch/

http://assist.daps.dla.mil

or from

the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text

of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a

specific exemption has been obtained.

3. REQUIREMENTS

3.1 Item requirements. The individual item requirements shall be in accordance with MIL-PRF-38535, appendix A for non-

JAN class level B devices and as specified herein. Product built to this drawing that is produced by a Qualified Manufacturer

Listing (QML) certified and qualified manufacturer or a manufacturer who has been granted transitional certification to MIL-

PRF-38535 may be processed as QML product in accordance with the manufacturers approved program plan and qualifying

activity approval in accordance with MIL-PRF-38535. This QML flow as documented in the Quality Management (QM) plan

may make modifications to the requirements herein. These modifications shall not affect form, fit, or function of the device.

These modifications shall not affect the PIN as described herein. A "Q" or "QML" certification mark in accordance with MIL-

PRF-38535 is required to identify when the QML flow option is used.

3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified

in MIL-PRF-38535, appendix A and herein.

3.2.1 Terminal connections. The terminal connections shall be as specified on figure 1.

3.2.2 Truth table.

3.2.2.1 Unprogrammed devices. The truth table for unprogrammed devices for contracts involving no altered item drawing

shall be as specified on figure 2. When required in groups A, B, or C inspection (see 4.3), the devices shall be programmed by

the manufacturer prior to test in a checkerboard pattern or similar pattern (a minimum of 50 percent of the total number of bits

programmed) or to any altered item drawing pattern which includes at least 25 percent of the total number of bits programmed.

3.2.2.2 Programmed devices. The requirements for supplying programmed devices are not part of this drawing.

3.2.3 Case outlines. The case outlines shall be in accordance with 1.2.2 herein.

3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics are

as specified in table I and shall apply over the full case operating temperature range.

3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical

tests for each subgroup are described in table I.

STANDARD

MICROCIRCUIT DRAWING

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43218-3990

DSCC FORM 2234

APR 97

SIZE

REVISION LEVEL

5962-88735

SHEET

3.5 Marking. Marking shall be in accordance with MIL-PRF-38535, appendix A. The part shall be marked with the PIN listed

in 1.2 herein. In addition, the manufacturer's PIN may also be marked as listed in MIL-HDBK-103 (see 6.6 herein). For

packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the

option of not marking the "5962-" on the device.

3.5.1 Certification/compliance mark. A compliance indicator “C” shall be marked on all non-JAN devices built in compliance

to MIL-PRF-38535, appendix A. The compliance indicator “C” shall be replaced with a "Q" or "QML" certification mark in

accordance with MIL-PRF-38535 to identify when the QML flow option is used.

3.6 Processing options. Since the PROM is an unprogrammed memory capable of being programmed by either the

manufacturer or the user to result in a wide variety of PROM configurations, two processing options are provided for selection

in the contract using an altered item drawing.

3.6.1 Unprogrammed PROM delivered to the user. All testing shall be verified through group A testing as defined in 4.3.1. It

is recommended that users perform subgroups 7 and 9 after programming to verify the specific program configuration.

3.6.2 Manufacturer-programmed PROM delivered to the user. All testing requirements and quality assurance provisions

herein, including the requirements of the altered item drawing shall be satisfied by the manufacturer prior to delivery.

3.7 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to be listed as an

approved source of supply in MIL-HDBK-103 (see 6.6 herein). The certificate of compliance submitted to DSCC-VA prior to

listing as an approved source of supply shall affirm that the manufacturer's product meets the requirements of MIL-PRF-38535,

appendix A and the requirements herein.

3.8 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38535, appendix A shall be provided

with each lot of microcircuits delivered to this drawing.

3.9 Notification of change. Notification of change to DSCC-VA shall be required for any change that affects this drawing.

3.10 Verification and review. DSCC, DSCC's agent, and the acquiring activity retain the option to review the manufacturer's

facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the

reviewer.

4. VERIFICATION

4.1 Sampling and inspection. Sampling and inspection procedures shall be in accordance with MIL-PRF-38535, appendix A.

4.2 Screening. Screening shall be in accordance with method 5004 of MIL-STD-883, and shall be conducted on all devices

prior to quality conformance inspection. The following additional criteria shall apply:

a. Burn-in test (method 1015 of MIL-STD-883).

(1) Test condition C or D. The test circuit shall be maintained by the manufacturer under document revision level control

and shall be made available to the preparing or procuring activity upon request. The test circuit shall specify the

inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in method 1015 of

MIL-STD-883.

(2) TA = +125°C, minimum.

b. Interim and final electrical test parameters shall be as specified in table II herein, except interim electrical parameter

tests prior to burn-in are optional at the discretion of the manufacturer.

4.3 Quality conformance inspection. Quality conformance inspection shall be in accordance with method 5005 of MIL-STD-

883 including groups A, B, C, and D inspections. The following additional criteria shall apply.

4.3.1 Group A inspection.

Tests shall be as specified in table II herein.

Subgroups 5 and 6 in table I, method 5005 of MIL-STD-883 shall be omitted.

Subgroup 4 (C

and C

OUT

measurements) shall be measured only for the initial test and after process or design

changes which may affect input or output capacitance. Sample size is 15 devices with no failures, and all input and

output terminals tested.

STANDARD

MICROCIRCUIT DRAWING

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43218-3990

DSCC FORM 2234

APR 97

SIZE

REVISION LEVEL

5962-88735

SHEET

Unprogrammed devices shall be tested for programmability and ac performance compliance to the requirements of

group A, subgroups 9, 10, and 11. Either of two techniques is acceptable:

(1) Testing the entire lot using additional built-in test circuitry which allows the manufacturer to verify

programmability and ac performance without programming the user array. If this is done, the resulting test

patterns shall be verified on all devices during subgroups 9, 10, and 11, group A testing in accordance with the

sampling plan specified in MIL-STD-883, method 5005.

(2) If such compliance cannot be tested on an unprogrammed device, a sample shall be selected to satisfy

programmability requirements prior to performing subgroups 9, 10, and 11. Twelve devices shall be submitted to

programming (see 4.4). If more than two devices fail to program, the lot shall be rejected. At the manufacturer's

option, the sample may be increased to 24 total devices with no more than four total device failures allowable.

Ten devices from the programmability sample shall be submitted to the requirements of group A, subgroups 9,

10, and 11. If more than two devices fail, the lot shall be rejected. At the manufacturer's option, the sample may

be increased to 20 total devices with no more than four total device failures allowable.

Subgroups 7 and 8 shall include verification of the truth table.

4.3.2 Groups C and D inspections.

End-point electrical parameters shall be as specified in table II herein.

Steady-state life test conditions, method 1005 of MIL-STD-883.

(1)

Test condition C or D. The test circuit shall be maintained by the manufacturer under document revision level

control and shall be made available to the preparing or acquiring activity upon request. The test circuit shall

specify the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in

method 1005 of MIL-STD-883.

= +125°C, minimum.

Test duration: 1,000 hours, except as permitted by method 1005 of MIL-STD-883.

(2)

(3)

4.4 Programming procedures. The programming procedures shall be as specified by the device manufacturer.

STANDARD

MICROCIRCUIT DRAWING

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43218-3990

DSCC FORM 2234

APR 97

SIZE

REVISION LEVEL

5962-88735

SHEET

Recommended Resources

Input and output circuit structure of MPD7500G b

Stereo record player amplifier circuit with bass control

Excitation control circuit during forward deceleration

LM339 fully automatic charger circuit

Positive polarity DC, DC converter circuit diagram

6V regulated power supply with input short circuit protection

SQLite connection statement under wince: Who knows the SQLite link statement under wince?...; jerrygang Embedded System

The latest version of beagleboneBlack has flying wires.: ...; qinkaiabc DSP and ARM Processors

Experts please come in...: This... I'm a novice... Don't bother... I want to use lm324 to make an amplifier circuit to amplify 10 times, but the simulation result using PSPICE8 is not correct... Please give me some advice. [IMG...; ks Analog electronics

FPGA please give me some advice????????????: I'm using an FPGA recently, the chip is ACTEL's A3P060, I have some questions to ask? I've only used CPLD to do simple logic before, but I saw that there are PLL, SRAM, FLASHROM and other resources in...; yanjianguo FPGA/CPLD

Recruiting DSP+FPGA engineers: The salary is acceptable. If you are interested, please contact us by email: [email]senglit@126.com[/email] Company website: [url]www.comlab.cn[/url] Position: Digital Signal Processing Engineer Repor...; senglit Recruitment

Driving principle and dynamic scanning display of LED digital tube: This site uses a common anode LED digital tube, and the common anode means that the 7-segment display code shares the positive power supply. Principle diagram:As can be seen from the above figure, if ...; rain MCU

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components