Question: Inside the CMOS transmission gate is a P-channel MOS and an N-channel MOS connected. When C is high, the N-tube at the bottom is turned on. When C is low, the PMOS tube at the top is low, so...
As shown in the figure, this is a bridge sampling circuit, and a PT100 resistor is connected between PT1A and PT1B. I have also searched for some information on the Internet, but it is not complete. A...
[i=s]This post was last edited by Tianyiwuzui on 2022-11-25 23:25[/i]Because the main content of the following evaluation is about AI voice recognition and image recognition, for voice recognition, th...
As shown below:
When analyzing the noise of an op amp circuit, the feedback resistor R1 (10K) can be regarded as an ideal resistor R2 (10K) connected in series with a white noise source (VN). In engin...
This event is really worthwhile. I am making a home environment monitoring board for my own fun, so I chose the ready-made board mEZS91202A to use as the power supply.
Packaging when receivedDelivery ...
A month ago, I wanted to design a piece of hardware that could be controlled by a smartphone without installing an app.Is anyone interested? If you are interested, please contact me. I will develop in...
introduction
With the continuous optimization of surface mount technology (SMT) and the rapid development of chip component manufacturing technology, the application of chip mounters in the el...[Details]
1. Introduction
Automobile pollution is one of the most important issues that people are most concerned about and need to solve urgently. As an important method for detecting automobile exhau...[Details]
1. Introduction
Since the 1980s, with the continuous development of automotive electronic technology, there are more and more electronic control units in automobiles, such as electronic fuel i...[Details]
1. Introduction
This design was made for participating in an electronic design competition. It effectively solved the problem of the operation and control of an electric car on a seesaw. The s...[Details]
With the advent of increasingly powerful processors, image sensors, memory, and other semiconductor devices, as well as the algorithms that enable them, computer vision can be implemented in a wide...[Details]
No matter which processor you are learning, the first thing you need to understand is the registers and working mode of the processor.
ARM has 37 registers, including 31 general registers and ...[Details]
From the PIC16F946 datasheet, we know that there are two ways to write values to the LCD for display:
1. Directly write the value to LCDDATA1~LCDDATA23
2. Use disconnect t...[Details]
Since the No. 4 blast furnace of Handan Iron and Steel was put into operation in 1993, its external equipment has been seriously aged, and the original PLC control system TDC3000 of the hot blast furn...[Details]
1 Introduction
In recent years, there have been many major advances in the production technology and processes of automotive headlights, which have greatly improved the performance of automoti...[Details]
With the rapid development of intelligent control technology, computers and information technology, the trend of information appliances IA (Information Application), computers and communications integ...[Details]
1 Introduction
There have been many studies on the detection and protection of power grid short circuit and line fault. The short circuit, overload and overvoltage protectors on the market have ...[Details]
Different initialization between C8051F and 80C51 series microcontrollers
In the past 30 years, major electronic component manufacturers in the world have launched their own unique single-chip...[Details]
Single-chip microcomputers are widely used because of their small size, powerful functions and low price. This article introduces the method of designing a micro electronic piano using the AT89C51 sin...[Details]
Continuity test
A variety of devices need to be checked for continuity, including cable assemblies, printed circuit boards, and connectors to ensure that these components have the expected contin...[Details]
With concerns about the growing energy crisis, motor efficiency has become an important and timely topic. This is because motors use 63% to 70% of the electricity produced in the United States and ...[Details]