Presidio provides high quality ceramic capacitors for a wide variety of commercial applications. Every component
must pass the test criteria listed below.
COMMERCIAL CAPACITORS
QUALITY ASSURANCE PROVISIONS
Every lot undergoes the following inspection and tests:
b) Dissipation Factor (DF) —
See following table:
Voltage Rating
10
16
25
50
> 50
NPO
N/A
.15%
.15%
.15%
.15%
BX/BR
5.0%
5.0%
3.5%
2.5%
2.5%
X7R
7.5%
7.5%
5.0%
3.5%
2.5%
a) Capacitance —
All parts are tested at 25°C and
1VACRMS in accordance with Method 305 of MIL-STD-
202. Y5V and low voltage parts follow EIA guidelines.
Y5V
13%
13%
13%
10%
10%
d) Insulation Resistance (IR @ 25°C) —
All parts are tested
at 25°C and rated voltage in accordance with Method 302
of MIL-STD-202. The minimum IR required is 100,000
megohms or 1,000 megohm-microfarads.
e) Visual —
Performed on pieces in accordance with
Presidio internal workmanship criteria.
f) Mechanical —
Level 1 AQL 1% in accordance with
this catalog.
g) Operating Temperature Range:
–55°C to +125°C
EXAMPLE PART NUMBER
c) Dielectric Withstanding Voltage (DWV) —
All parts are
tested to EIA/MIL standards.
0805BX103K2P3
See Page 3
“HOW TO ORDER A STANDARD PART”
For applications where reliability, but not full military screening is required, Presidio recommends its high reliability
“HR”
capacitors. The “HR” code signifies use of the test program below, or the use of a customer Source Control
Document (SCD) that includes voltage conditioning.
HIGH RELIABILITY “HR” CAPACITORS
QUALITY ASSURANCE PROVISIONS
Every lot undergoes the following inspection and tests:
b) Capacitance —
All parts are tested at 25°C and
1VACRMS in accordance with Method 305 of MIL-STD-
202.
c) Dissipation Factor
Voltage Rating
10
16
25
50
> 50
(DF) —
See following table:
NPO
BX/BR
X7R
N/A
5.0%
7.5%
.15%
5.0%
7.5%
.15%
3.5%
5.0%
.15%
2.5%
3.5%
.15%
2.5%
2.5%
a) Voltage Conditioning —
All parts receive a voltage
conditioning at 2X rated voltage and 125°C for a minimum
of 8 hours. An accelerated voltage conditioning, following
MIL-PRF-55681 guidelines, may be used at Presidio’s
discretion.
d) Dielectric Withstanding Voltage (DWV) —
All parts are
tested at 2.5X rated voltage in accordance with Method
301 of MIL-STD-202, or according to EIA/MIL Standards.
e) Insulation Resistance (IR @ 25°C) —
All parts are tested
at 25°C and rated voltage in accordance with Method 302
of MIL-STD-202. The minimum IR required is 100,000
megohms or 1,000 megohm-microfarads.
g) Mechanical —
Level 1 AQL 1% in accordance with this
catalog.
f) Visual —
Performed on pieces in accordance with
Presidio internal workmanship criteria.
Y5V
13%
13%
13%
10%
10%
h) Element Evaluation (optional) —
A MIL-PRF-38534
Appendix C Passive Element Class H element evaluation
is available where the customer requires this testing.
Element evaluation is not required on each lot, and must
be specified on the purchase order.
i) Operating Temperature Range:
–55°C to +125°C
CERTIFICATE OF COMPLIANCE
EXAMPLE PART NUMBER
HR
0805BX103K2P3
Add “HR” to the beginning of the standard
Presidio part number. See Page 3
“HOW TO ORDER A STANDARD PART”
A Certificate of Compliance will be sent with each shipment.
Visit Presidio’s website for additional
technical information on these products.
4
7169 Construction Court, San Diego, CA 92121 • Tel: 858-578-9390 • Fax: 858-578-6225
www.presidiocomponents.com • email: info@presidiocomponents.com
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
