Note the following details of the code protection feature on Microchip devices:
•
•
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
Microchip is willing to work with the customer who is concerned about the integrity of their code.
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
•
•
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights.
Trademarks
The Microchip name and logo, the Microchip logo, dsPIC,
K
EE
L
OQ
, K
EE
L
OQ
logo, MPLAB, PIC, PICmicro, PICSTART,
PIC
32
logo, rfPIC and UNI/O are registered trademarks of
Microchip Technology Incorporated in the U.S.A. and other
countries.
FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor,
MXDEV, MXLAB, SEEVAL and The Embedded Control
Solutions Company are registered trademarks of Microchip
Technology Incorporated in the U.S.A.
Analog-for-the-Digital Age, Application Maestro, CodeGuard,
dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN,
ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial
Programming, ICSP, Mindi, MiWi, MPASM, MPLAB Certified
logo, MPLIB, MPLINK, mTouch, Omniscient Code
Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit,
PICtail, REAL ICE, rfLAB, Select Mode, Total Endurance,
TSHARC, UniWinDriver, WiperLock and ZENA are
trademarks of Microchip Technology Incorporated in the
U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
© 2011, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.
ISBN: 978-1-60932-851-1
Microchip received ISO/TS-16949:2002 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC
®
MCUs and dsPIC
®
DSCs, K
EE
L
OQ
®
code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
DS39977C-page 2
Preliminary
2011 Microchip Technology Inc.
PIC18F66K80 FAMILY
28/40/44/64-Pin, Enhanced Flash Microcontrollers
with ECAN™ and nanoWatt XLP Technology
Power-Managed Modes:
•
•
•
•
•
•
•
•
•
•
•
•
Run: CPU on, Peripherals on
Idle: CPU off, Peripherals on
Sleep: CPU off, Peripherals off
Two-Speed Oscillator Start-up
Fail-Safe Clock Monitor (FSCM)
Power-Saving Peripheral Module Disable (PMD)
Ultra Low-Power Wake-up
Fast Wake-up, 1
s,
Typical
Low-Power WDT, 300 nA, Typical
Run mode Currents Down to Very Low 3.8
A,
Typical
Idle mode Currents Down to Very Low 880 nA, Typical
Sleep mode Current Down to Very Low 13 nA, Typical
ECAN Bus Module Features (Continued):
• 16 Full, 29-Bit Acceptance Filters with Dynamic
Association
• Three Full, 29-Bit Acceptance Masks
• Automatic Remote Frame Handling
• Advanced Error Management Features
Special Microcontroller Features:
•
Operating Voltage Range: 1.8V to 5.5V
• On-Chip 3.3V Regulator
• Operating Speed up to 64 MHz
• Up to 64 Kbytes On-Chip Flash Program Memory:
- 10,000 erase/write cycle, typical
- 20 years minimum retention, typical
• 1,024 Bytes of Data EEPROM:
- 100,000 Erase/write cycle data EEPROM
memory, typical
• 3.6 Kbytes of General Purpose Registers (SRAM)
• Three Internal Oscillators: LF-INTOSC (31 KHz),
MF-INTOSC (500 kHz) and HF-INTOSC (16 MHz)
• Self-Programmable under Software Control
• Priority Levels for Interrupts
• 8 x 8 Single-Cycle Hardware Multiplier
• Extended Watchdog Timer (WDT):
- Programmable period from 4 ms to 4,194s
• In-Circuit Serial Programming™ (ICSP™) via Two Pins
• In-Circuit Debug via Two Pins
• Programmable BOR
• Programmable LVD
Comparators
BORMV/LVD
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
ECAN Bus Module Features:
• Conforms to CAN 2.0B Active Specification
• Three Operating modes:
- Legacy mode (full backward compatibility with
existing PIC18CXX8/FXX8 CAN modules)
- Enhanced mode
- FIFO mode or programmable TX/RX buffers
• Message Bit Rates up to 1 Mbps
• DeviceNet™ Data Byte Filter Support
• Six Programmable Receive/Transmit Buffers
• Three Dedicated Transmit Buffers with Prioritization
• Two Dedicated Receive Buffers
TABLE 1:
DEVICE COMPARISON
Timers
8-Bit/16-Bit
12-Bit A/D
Channels
EUSART
Program
Memory
32 Kbytes
32 Kbytes
64 Kbytes
64 Kbytes
32 Kbytes
32 Kbytes
64 Kbytes
64 Kbytes
32 Kbytes
32 Kbytes
64 Kbytes
64 Kbytes
Data
Data EE
Memory
Pins
(Bytes)
(Bytes)
3,648
3,648
3,648
3,648
3,648
3,648
3,648
3,648
3,648
3,648
3,648
3,648
1,024
1,024
1,024
1,024
1,024
1,024
1,024
1,024
1,024
1,024
1,024
1,024
28
28
28
28
40/44
40/44
40/44
40/44
64
64
64
64
ECAN™
CTMU
MSSP
CCP/
ECCP
DSM
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Device
I/O
PIC18F25K80
PIC18LF25K80
PIC18F26K80
PIC18LF26K80
PIC18F45K80
PIC18LF45K80
PIC18F46K80
PIC18LF46K80
PIC18F65K80
PIC18LF65K80
PIC18F66K80
PIC18LF66K80
24
24
24
24
35
35
35
35
54
54
54
54
1
1
1
1
1
1
1
1
1
1
1
1
8-ch
8-ch
8-ch
8-ch
11-ch
11-ch
11-ch
11-ch
11-ch
11-ch
11-ch
11-ch
4/1
4/1
4/1
4/1
4/1
4/1
4/1
4/1
4/1
4/1
4/1
4/1
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2011 Microchip Technology Inc.
Preliminary
DS39977C-page 3
PIC18F66K80 FAMILY
Peripheral Highlights:
• Five CCP/ECCP modules:
- Four Capture/Compare/PWM (CCP) modules
- One Enhanced Capture/Compare/PWM
(ECCP) module
• Five 8/16-Bit Timer/Counter modules:
- Timer0: 8/16-bit timer/counter with 8-bit
programmable prescaler
- Timer1, 3: 16-bit timer/counter
- Timer2, 4: 8-bit timer/counter
• Two Analog Comparators
• Configurable Reference Clock Output
• Charge Time Measurement Unit (CTMU):
- Capacitance measurement
- Time measurement with 1 ns typical resolution
- Integrated voltage reference
• High-Current Sink/Source 25 mA/25 mA (PORTB
and PORTC)
• Up to Four External Interrupts
• One Master Synchronous Serial Port
(MSSP) module:
- 3/4-wire SPI (supports all four SPI modes)
- I
2
C™ Master and Slave modes
• Two Enhanced Addressable USART modules:
- LIN/J2602 support
- Auto-Baud Detect (ABD)
• 12-Bit A/D Converter with up to 11 Channels:
- Auto-acquisition and Sleep operation
- Differential Input mode of operation
• Data Signal Modulator module:
- Select modulator and carrier sources from vari-
ous module outputs
• Integrated Voltage Reference
DS39977C-page 4
Preliminary
2011 Microchip Technology Inc.
京公网安备 11010802033920号
EEWORLD
