FIBER OPTIC TECHNOLOGY
CALIBRATION LABORATORY
Master Patchcord
Description:
We offer an extensive range of pre-terminated cable assemblies that are 100% tested to ensure
conformance with your specifications. These assemblies are used for measuring and manufacturing of
fiber optic components and optical network testing.
The Master patchcord is equipped with a master connector according to the specifications below.
The second connector is a standard type. For the hybrid patchcord version different types of master
and standard connector types are also available.
M-USC/USC-20 SM
M-SC/SC-28 M6S
Specifications:
Insertion loss (IL)
Return loss (RL)
Geometrical parameters:
Eccentricity of core for the center of ferrule
Outer diameter of ferrule
End curve offset
Fiber height
End curve radius
APC angle
Temperature stability (-40°C to +80°C)
Mating durability (500 cycles)
Cable retention (Ø 2.8 mm)
Material:
Connector body
Ferrule material
Fibre
Crimp sleeve
Boot
Singlemode
Multimode
≤
0.1 dB
≤
0.1 dB
(λ
= 1310, 1550, 1650 nm) (λ = 850, 1300 nm)
UPC
≥
55 dB
PC
≥
30 dB
APC
≥
65 dB
≤
0.5 µm
Standard connectors:
SFF connectors:
Standard connectors:
SFF connectors:
8 ± 0.1°
< 0.2 dB
< 0.2 dB
100 N
metal, plastic
full ceramic zirconia
9/125
metal
rubber
≤
0.5 µm
2.499 µm
1.249 µm
≤
25 µm
-30 to +50 nm
PC polishing 10 – 18 mm
APC polishing 5 – 12 mm
PC/APC
5 – 12 mm
N/A
< 0.2 dB
< 0.2 dB
100 N
metal, plastic
full ceramic zirconia
50/125; 62.5/125
metal
rubber
Underwriters Laboratories approval, file number OBFA.E231946
CON_07-02_EN
14/06/2005
is registered trademark of Optokon Co., Ltd. Other names and trademarks mentioned herein may be the trademarks of their respective owners.
Optokon Co., Ltd., Cerveny Kriz 250, 586 02 Jihlava, Czech Republic
tel. +420 564 040 111, fax +420 564 040 134, +420 567 311 292, www.optokon.com, info@optokon.cz
1
FIBER OPTIC TECHNOLOGY
CALIBRATION LABORATORY
Features:
•
•
•
•
•
•
•
•
ISO 9100 approved
100% Return loss test
100% Visual Inspection
100% Insertion loss test
100% Interferometric test
Manufactured to meet EIA/TIA
Standards
Batch tracebility
UL approval
Visual inspection:
Singlemode
Allowable Defects and Scratches
Zone
1a
1b
-
2
Description
Core Zone
Diameter
0 to 25
µm
Defects (diameter)
none
any < 2
µm
5 from 2 - 5
µm
none > 5
µm
any
none > 10
µm
Scratches (width)
None
none > 3
µm
Any
Any
Cladding Zone 25 to 120
µm
Adhesive
Zone
Contact Zone
120 to 130
µm
130 to 250
µm
Ordering code:
M - YYY
connectors
YYY – Master connector
AAA
1
– standard connector
code
type
LC
LC/PC
ULC
LC/UPC
NLC
LC/APC
MU
MU/PC
UMU
MU/UPC
NMU
MU/APC
PC
FC/PC
UPC
FC/UPC
NPC
FC/APC
SC
SC/PC
USC
SC/UPC
NSC
SC/APC
SL
ST/PC
USL
ST/UPC
PE2
LSH (E2000)/PC
UE2
LSH(E2000)/UPC
NE2
LSH(E2000)/APC
/ AAA -
XX XX
XX - diameter of cable
cable Ø 1.7 mm
17
20
cable Ø 2.0 mm
24
cable Ø 2.4 mm
28
cable Ø 2.8 mm
XX - type of fibre
SM
SM 9/125 µm (G.652)
M5
MM 50/125 µm
M5S
MM 50/125 µm with scrambler
2
M6
MM 62.5/125 µm
M6S
MM 62.5/125 µm with scrambler
2
LC
MU
FC
SC
1)
AAA
– additional connector types according to
CON_13-01_EN - ORD_CODE datasheet
2) Mode scrambler shall be used for MM measurement
•
•
•
•
Standard master patchcord length – 2 m, other on
demand
NPC – 2.05 standard, 2.15 on demand
Other connector types on request
Polishing types:
PC – multimode connectors
UPC – ultra PC, singlemode connectors
APC – angled PC, 8°, singlemode connectors
ST
LSH
IEC Test Methods:
Singlemode:
IEC 874-1 4.4.7.4. Method 7
Multimode:
IEC 874-1 4.4.7.4. Method 7
Other IEC test methods – according to FOT_02-01_EN
CON_07-02_EN
14/06/2005
is registered trademark of Optokon Co., Ltd. Other names and trademarks mentioned herein may be the trademarks of their respective owners.
Optokon Co., Ltd., Cerveny Kriz 250, 586 02 Jihlava, Czech Republic
tel. +420 564 040 111, fax +420 564 040 134, +420 567 311 292, www.optokon.com, info@optokon.cz
2
Analog electronics
京公网安备 11010802033920号
EEWORLD
