• Buss SUPER-LAG Renewable fuses with longer time-lag
than other Class H fuses of this type can better sustain over-
loads without needlessly opening.
• SUPER-LAG fuses are used in circuits of industrial and
commercial structures where maximum short-circuit currents
are of a low level (below 10,000 amperes) and frequent out-
ages dictate the economy of the “renewable” type fuse.
• These fuses are generally sized at the ampere rating of non-
inductive circuits and 300% for motor circuits.
11-27-00
J00269
Form No. REN/RES
Page 1 of 4
BIF Doc #1028
Bussmann
®
Super-Lag Renewable Fuses
and Fuse Links
250 and 600 Volts, 1-600 Amps
RENEWABLE FUSES
REN SUPER-LAG –– 250 VOLTS AC
Catalog Numbers and Ampere Ratings
REN-1
REN-2
REN-3
REN-4
REN-5
REN-6
REN-7
REN-8
REN-10
REN-12
REN-15
REN-20
REN-25
REN-30
REN-35
REN-40
REN-45
REN-50
REN-60
REN-70
REN-80
REN-90
REN-100
REN-110
REN-125
REN-150
REN-175
REN-200
REN-225
REN-250
REN-300
REN-350
REN-400
REN-450
REN-500
REN-600
REN and RES
(LKN & LKS)
RES SUPER-LAG –– 600 VOLTS AC
Catalog Numbers and Ampere Ratings
RES-1
RES-2
RES-3
RES-4
RES-5
RES-6
RES-8
RES-10
RES-12
RES-15
RES-20
RES-25
RES-30
RES-35
RES-40
RES-45
RES-50
RES-60
RES-70
RES-80
RES-90
RES-100
RES-110
RES-125
RES-150
RES-175
RES-200
RES-225
RES-250
RES-300
RES-350
RES-400
RES-450
RES-500
RES-600
—
Carton Quantity and Weight
Catalog
Number
REN 1–30
REN 35–65
REN 70–100
REN 110–200
REN 225–400
REN 450–600
*Weight per carton.
Carton
Qty
10
10
5
1
1
1
Weight*
Lbs.
0.55
1.40
2.3
1.09
2.66
3.13
Kg.
0.249
0.634
1.043
0.494
1.206
1.419
Carton Quantity and Weight
Catalog
Number
RES 1–30
RES 35–60
RES 70–100
RES 110–200
RES 225–400
RES 450–600
*Weight per carton.
Carton
Qty
10
10
5
1
1
1
Weight*
Lbs.
0.18
0.36
4.16
1.83
3.73
3.75
Kg.
0.082
0.163
1.886
0.830
1.690
1.701
FUSE LINKS
LKN SUPER-LAG –– 250 VOLTS AC
Catalog Numbers and Ampere Ratings
LKN-1
LKN-1-1/2
LKN-2
LKN-3
LKN-4
LKN-5
LKN-6
LKN-7
LKN-8
LKN-9
LKN-10
LKN-12
LKN-15
LKN-20
LKN-25
LKN-30
LKN-35
LKN-40
LKN-45
LKN-50
LKN-60
LKN-65
LKN-70
LKN-75
LKN-80
LKN-90
LKN-100
LKN-110
LKN-125
LKN-150
LKN-175
LKN-200
LKN-225
LKN-250
LKN-300
LKN-350
LKN-400
LKN-450
LKN-500
LKN-600
LKS SUPER-LAG –– 600 VOLTS AC
Catalog Numbers and Ampere Ratings
LKS-1
LKS-2
LKS-2-1/2
LKS-3
LKS-4
LKS-5
LKS-6
LKS-7
LKS-8
LKS-9
LKS-10
LKS-12
LKS-15
LKS-17-1/2
LKS-20
LKS-25
LKS-30
LKS-35
LKS-40
LKS-45
LKS-50
LKS-60
LKS-70
LKS-80
LKS-90
LKS-100
LKS-110
LKS-125
LKS-150
LKS-175
LKS-200
LKS-225
LKS-250
LKS-300
LKS-350
LKS-400
LKS-450
LKS-500
LKS-600
—
Carton Quantity and Weight
Catalog
Number
LKN 1–30
LKN 35–65
LKN 70–100
LKN 110–200
LKN 225–400
LKN 450–600
*Weight per carton.
Carton
Qty
20
20
10
5
5
2
Weight*
Lbs.
0.05
0.20
0.20
0.25
0.55
0.32
Kg.
0.02
0.09
0.09
0.11
0.25
0.15
Carton Quantity and Weight
Catalog
Number
LKS 1–30
LKS 35–60
LKS 65–100
LKS 110–200
LKS 225–400
LKS 450–600
*Weight per carton.
Carton
Qty
20
20
10
5
5
2
Weight*
Lbs.
0.05
0.02
0.02
0.25
0.55
0.32
Kg.
0.02
0.09
0.09
0.11
0.25
0.15
11-27-00
J00269
Form No. REN/RES
Page 2 of 4
BIF Doc #1028
Bussmann
®
Super-Lag Renewable Fuses
and Fuse Links
250 Volts, 1-600 Amps
Time-Current Characteristic Curves–Average Melt
REN SUPER-LAG (250 VOLTS AC)
REN and RES
(LKN & LKS)
11-27-00
J00269
Form No. REN/RES
Page 3 of 4
BIF Doc #1028
Bussmann
®
Super-Lag Renewable Fuses
and Fuse Links
600 Volts, 1-600 Amps
Time-Current Characteristic Curves–Average Melt
RES SUPER-LAG (600 VOLTS AC)
REN and RES
(LKN & LKS)
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to
clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any
products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been select-
ed, it should be tested by the user in all possible applications.
I have just started learning stm32 and have encountered many problems recently. Although the problems are very simple, some are 1+1==?, but for a beginner like me, it is really bitter. Fortunately, wi...
I use protel99se under Thunder, and other people can use it, but my computer can't. After setup, it gets stuck after entering 3 grids. After waiting for a long time, the server fails to run. I checked...
1. STM32F103RCT6 12-bit ADC; 2. ADC is configured with 4 channels and one ADC module, scanning is non-continuous, software is started, and DMA is triggered; 3. Input AC voltage signal 50HZ 1V, bias vo...
Can someone please teach me how to read the PLC program?
I am a layman... I hope the experts can give me some advice and send me any information..............Thank you!!!
wj2008hf@163.com
QQ:215127089...
1. Overview of the Pengpaiwei PT32L033 series
PT32L033 is a 32 -bit high-performance MCU based on the Cortex-M0 core , supporting an operating voltage of 1.8~3.6V and an operating temperature of -40~+...
Has anyone made a sim card read/write driver ? Please give me an example, thanks. I also have a question : when sending a select command to a sim card, the following data is sent : 0xA0, 0xA4, 0x00, 0...
Guangdong Traffic Regulation No. 355
To all municipal transportation bureaus (commissions) above the prefecture level, provincial transportation groups, Guangdong Power Grid Compa...[Details]
Recently, the Provincial Development and Reform Commission and the Provincial Poverty Alleviation Office jointly organized the application for a number of centralized photovoltaic poverty alleviation ...[Details]
1. Purpose In actual product release, if the program stored in the MCU Flash is not protected, some illegal companies may read the program in the Flash through an emulator (J-Link, ST-Link, e...[Details]
In the actual project development process, it is common to encounter modifications to the hardware circuit, and then the modified part requires the modification of the driver. Thinking about the comi...[Details]
1. Determination of STM32 ADC sampling frequency 1. First, read some information to determine the ADC clock: (1) The ADCCLK clock provided by the clock controller is synchronized with the PCLK2 (A...[Details]
1. Initial understanding of FSMC: FSMC consists of 4 modules: (1) AHB interface (including FSMC configuration register) (2) NOR flash memory and PSRAM controller (when driving LCD, LCD is like a PSRA...[Details]
According to MEMS Consulting, Japan's
Toshiba
will further develop its automotive
LiDAR
(laser radar) semiconductor business, mainly focusing on: (1)
light receiving elements use...[Details]
Nowadays, everyone is saying that "technology is people-oriented". The essence of the development of technology is to serve the improvement of the quality of life of human beings. Automated driving...[Details]
I am going to do a project recently, which requires counting the frequency and duty cycle of the external PWM signal. The chip used is STM32F207 Looking at the datasheet, I found that one of the ma...[Details]
The watchdog timer is used to prevent the program from running away due to strong interference noise caused by power supply, space electromagnetic interference or other reasons. Many microcontrollers...[Details]
Making a digital sampling oscilloscope has been my long-standing wish, but after all, this goal is quite difficult, and there are too many aspects involved, such as analog front-end circuit, high-spe...[Details]
Summary of STM32 peripheral DMA usage: 1. Select DAM mode according to your needs: (1) Circular mode—DMA_Mode = DMA_Mode_Circular (2) Normal mode—DMA_Mode = DMA_Mode_Normal 2. For Chanel3 of DMA1, t...[Details]
China Energy Storage Network News:
New era, new mission, new journey, the clarion call of the 19th National Congress report is loud and inspiring. Against this background, State Grid Corporat...[Details]
stm32/stm8
京公网安备 11010802033920号
EEWORLD
