Aluminium Housed Power Resistors
Type HS Series
Type HS Series
Characteristics - Electrical
HSA & HSC - 5 Watts to 75 Watts
HSA5
Dissipation @ 25°C with Heatsink (Watts):
10
Without Heatsink:
5.5
Ohmic Value Min (Ohms):
R01
Max:
10K
Max. Working Voltage (DC or ACrms) Volts:
160
Dielectric Strength (AC Peak) Volts:
1400
Stability (% resistance change, 1000 hours) (%):
1
Standard Heatsink - Area (mm
2
):
41500
Thickness (mm):
1
Number of Mounting Holes:
2 hole
HSA10
16
8
R01
15K
265
1400
1
41500
1
2 hole
HSA25
25
12.5
R01
36K
550
2500
1
53500
1
2 hole
HSA50
50
20
R01
100K
1250
2500
1
53500
1
2 hole
HSC75
75
45
R05
50K
1400
5000
2
99500
3
4 hole
Tyco are the leading European
supplier of standard and custom
designed
aluminium
housed
resistors for general-purpose use,
power supplies, power generation
and the traction industry.
The HS is a range of extremely
stable, high quality wire wound
resistors capable of dissipating high
power in a limited space with
relatively low surface temperature.
The power is rapidly dissipated
as heat through the aluminium hous-
ing to a specified heatsink.
The resistors are made from quality
materials for optimum reliability and
stability. Tyco can test resistors to
conform to relevant international,
MIL or customer specifications.
Tyco are happy to advise on
the use of resistors for pulse appli-
cations and to supply information for
high voltage use and low-ohmic
value, alternative mountings and
termination type.
Characteristics - Electrical
HSC - 100 Watts to 300 Watts
HSC100
Dissipation @ 25°C with Heatsink (Watts):
100
Without Heatsink:
50
Ohmic Value Min (Ohms):
R05
Max:
100K
Max. Working Voltage (DC or ACrms) Volts:
1900
Dielectric Strength (AC Peak) Volts:
5000
Stability (% resistance change, 1000 hours) (%):
2
Standard Heatsink - Area (mm
2
):
99500
Thickness (mm):
3
Number of Mounting Holes:
4 hole
HSC150
150
55
R10
100K
2500
5000
2
99500
3
4 hole
HSC200
200
50
R10
50K
1900
5600
3
375000
3
6 hole
HSC250
250
60
R10
68K
2200
5600
3
476500
3
6 hole
HSC300
300
75
R10
82K
2500
5600
3
578000
3
6 hole
Key Features
■
■
■
■
■
Established product
with proven reliability
•
Leading the way with
over 50 years of design
and manufacturing
experience
5 Watts to 300 Watts
(500 Watt and 1000 Watt
versions available)
•
Largest range on the
market
Versatile product
•
Bench mark in every
industry
Custom designs
•
Windings, terminations,
mountings - We have
a solution for your
application
Low resistance, low
inductance and higher
voltage versions available
•
Specialising the
standard
Braking Resistor
Balancing Resistor
Capacitor Charging &
Discharging
Crowbar
Filter
Electrical Machinery
general use
Available through
Distribution
Characteristics -
Electrical
Long Term Stability:
For improvements in long-term stability, resistors must be derated
as follows; for 50% of stated ΔR maximum dissipation must not
exceed 70% of rating; for 25% of stated ΔR maximum, dissipation
must not exceed 50% of rating
Dry: 10,000MΩ minimum. After moisture test: 1000MΩ minimum.
Although the use of proprietary heat sinks with lower thermal
resistance is acceptable, up rating is not recommended.
The use of proprietary heat sink compound to improve thermal
conductivity is recommended for optimum performance of all
sizes but essential for HSC200, HSC250 & HSC300
Temperature coefficient below 100R, 50ppm/°C
Temperature coefficient above 100R, 30ppm/°C
Tolerance, 5% standard: 10%, 3%, 2%, 0.5% & 0.25% available
Tolerance for values below R10, 10% standard
Insulation Resistance:
Heat Dissipation:
Specification:
Applications
■
■
■
■
■
■
■
Literature No. 1773035
Issued: 03-08
Dimensions are shown for
reference purposes only.
Dimensions are in
millimetres unless
otherwise specified.
Specifications subject to
change.
tycoelectronics.com
passives.tycoelectronics.com
Embedded System
京公网安备 11010802033920号
EEWORLD
