Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■
Product information in this catalog is as of October 2017. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully
before practical application or use of our products.
Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or
equipment incorporating our products, which are caused under the conditions other than those specified in this
catalog or individual product specification sheets.
■
Please contact TAIYO YUDEN for further details of product specifications as the individual product specification
sheets are available.
■
Please conduct validation and verification of our products in actual condition of mounting and operating
environment before using our products.
■
The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA
equipment, home electric appliances, office equipment, information and communication equipment), medical
equipment classified as Class I or II by IMDRF, industrial equipment, and automotive interior applications, etc.
Please be sure to contact TAIYO YUDEN for further information before using the products for any equipment which
may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment,
medical equipment classified as Class III by IMDRF).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g.,
aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control
equipment, undersea equipment, military equipment).
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g.,
in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN.
Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic
equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to
install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way
responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog
for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above.
■
Information contained in this catalog is intended to convey examples of typical performances and/or applications
of our products and is not intended to make any warranty with respect to the intellectual property rights or any
other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights.
■
Please note that the scope of warranty for our products is limited to the delivered our products themselves and
TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products.
Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in
accordance with such agreement.
■
The contents of this catalog are applicable to our products which are purchased from our sales offices or
authorized distributors (hereinafter
“TAIYO
YUDEN’official sales channel” Please note that the contents of this
s
).
catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN’official sales
s
channel.
■
Caution for Export
Some of our products listed in this catalog may require specific procedures for export according to
“U.S.
Export
Administration Regulations”
,
“Foreign
Exchange and Foreign Trade Control Law”of Japan, and other applicable
regulations. Should you have any questions on this matter, please contact our sales staff.
1
8
MULTILAYER CERAMIC CAPACITORS
MULTILAYER CERAMIC CAPACITORS
REFLOW
REFLOW
AEC-Q200
AEC- Q200
■PART
NUMBER
J M K
① ② ③
①Rated voltage
Code
A
J
L
E
T
G
U
H
Q
S
②Series name
Code
M
V
W
3
1 6
④
△
⑤
B
⑥
J
1
0 6
⑦
M L H T △
⑧ ⑨ ⑩ ⑪ ⑫
③End termination
Code
K
J
S
F
④Dimension（L×W）
△＝Blank space
Rated voltage［VDC½
4
6.3
10
16
25
35
50
100
250
630
End termination
Plated
Soft Termination
Cu Internal Electrodes
High Reliability Application
CERAMIC CAPACITORS
20
Series name
Multilayer ceramic capacitor
Multilayer ceramic capacitor for high frequency
LW reverse type multilayer capacitor
Dimensions
（L×W）［mm½
063
0.6 × 0.3
1.0 × 0.5
105
0.52× 1.0 ※
1.6 × 0.8
107
0.8 × 1.6 ※
2.0 × 1.25
212
1.25× 2.0 ※
316
3.2 × 1.6
325
3.2 × 2.5
432
4.5 × 3.2
Note : ※LW reverse type（□WK） only
Type
W［mm½
Standard
0.3±0.05
0.5±0.10
0.8＋0.15/－0.05
1.25＋0.15/－0.05
1.6±0.20
2.5±0.30
0.5＋0.15/－0.05
0.8＋0.20/－0
1.25＋0.20/－0
1.6±0.30
0.5＋0.20/－0
0.8＋0.25/－0
1.25＋0.25/－0
1.25±0.15
1.6±0.20
EIA（inch）
0201
0402
0204
0603
0306
0805
0508
1206
1210
1812
⑤Dimension tolerance
Code
Type
△
ALL
063
105
107
A
212
316
325
105
107
B
212
316
105
107
212
212
316
325
L［mm½
Standard
0.6±0.05
1.0±0.10
1.6＋0.15/－0.05
2.0＋0.15/－0.05
3.2±0.20
3.2±0.30
1.0＋0.15/－0.05
1.6＋0.20/－0
2.0＋0.20/－0
3.2±0.30
1.0＋0.20/－0
1.6＋0.25/－0
2.0＋0.25/－0
2.0±0.15
3.2±0.20
T［mm½
Standard
0.3±0.05
0.5±0.10
0.8＋0.15/－0.05
0.85±0.10
1.25＋0.15/－0.05
1.6±0.20
2.5±0.30
0.5＋0.15/－0.05
0.8＋0.20/－0
0.85±0.10
1.25＋0.20/－0
1.6±0.30
0.5＋0.20/－0
0.8＋0.25/－0
1.25＋0.25/－0
0.85±0.15
1.15±0.20
1.6±0.20
2.5±0.30
△= Blank space
C
K
3.2±0.50
2.5±0.30
Note: ½½. STANDARD EXTERNAL DIMENSIONS
⑥Temperature characteristics code
■High dielectric type
Applicable
Temperature
Code
standard
range［℃½
BJ
C6
B7
C7
D7
EIA
EIA
EIA
EIA
EIA
X5R
X6S
X7R
X7S
X7T
－55½＋ 85
－55½＋105
－55½＋125
－55½＋125
－55½＋125
Ref. Temp.［℃½
25
25
25
25
25
Capacitance change
±15％
±22％
±15％
±22％
＋22％/－33％
Capacitance
tolerance
±10％
±20％
±10％
±20％
±10％
±20％
±10％
±20％
±10％
±20％
Tolerance
code
K
M
K
M
K
M
K
M
K
M
hq_c_mlcc_e-E06R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
1
8
■Temperature compensating type
Applicable
Code
standard
JIS
CG
EIA
C0G
CG
Temperature
range［℃½
Ref. Temp.［℃½
20
Capacitance change
－55½＋125
25
0±30ppm/℃
Capacitance
tolerance
±0.1pF
±0.25pF
±0.5pF
±1pF
±2％
±5％
Tolerance
code
B
C
D
F
G
J
⑦Nominal capacitance
Code
（example）
0R5
010
100
101
102
103
104
105
106
107
Note : R＝Decimal point
⑧Capacitance tolerance
Code
B
C
D
G
J
K
M
Nominal capacitance
0.5pF
1pF
10pF
100pF
1,000pF
0.01μ
F
0.1μ
F
1.0μ
F
10μ
F
100μ
F
⑨Thickness
Code
P
T
V
C
A
D
F
G
L
N
M
⑩Special code
Code
H
⑪Packaging
Code
F
R
T
P
⑫Internal code
Code
△
Thickness［mm½
0.3
0.5
0.7(107type or more)
0.8
0.85(212type or more)
1.15
1.25
1.6
1.9
2.5
CERAMIC CAPACITORS
Capacitance tolerance
±0.1pF
±0.25pF
±0.5pF
±2％
±5％
±10％
±20％
Special code
MLCC for Industrial and Automotive
Packaging
φ
178mm Taping （2mm pitch）
φ
178mm Embossed Taping （4mm pitch）
φ
178mm Taping （4mm pitch）
φ
178mm Taping （4mm pitch, 1000 pcs/reel）
325 type（Thickness code M）
Internal code
Standard
hq_c_mlcc_e-E06R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
1
8
21
■STANDARD
EXTERNAL DIMENSIONS
W
L
T
e
Type( EIA )
□MK063（0201）
□MK105（0402）
□MF105（0402）
□WK105（0204）※
□MK107（0603）
□MF107（0603）
□MJ107（0603）
L
W
□VS107（0603）
□WK107（0306）※
L
0.6±0.03
(0.024±0.001)
1.0±0.05
(0.039±0.002)
0.52±0.05
(0.020±0.002)
1.6±0.10
(0.063±0.004)
1.6±0.10
(0.063±0.004)
1.6±0.10
(0.063±0.004)
0.8±0.10
(0.031±0.004)
2.0±0.10
(0.079±0.004)
T
e
※ LW reverse type
□MJ212（0805）
2.0±0.10
(0.079±0.004)
2.0±0.10
(0.079±0.004)
1.25±0.15
(0.049±0.006)
3.2±0.15
(0.126±0.006)
□MK212（0805）
□MF212（0805）
□VS212（0805）
□WK212（0508）※
Dimension [mm] （inch）
W
T
0.3±0.03
0.3±0.03
(0.012±0.001)
(0.012±0.001)
0.5±0.05
0.5±0.05
(0.020±0.002)
(0.020±0.002)
1.0±0.05
0.3±0.05
(0.039±0.002)
(0.012±0.002)
0.8±0.10
0.8±0.10
(0.031±0.004)
(0.031±0.004)
0.8±0.10
0.8±0.10
(0.031±0.004)
(0.031±0.004)
0.8±0.10
0.7±0.10
(0.031±0.004)
(0.028±0.004)
1.6±0.10
0.5±0.05
(0.063±0.004)
(0.020±0.002)
0.85±0.10
(0.033±0.004)
1.25±0.10
(0.049±0.004)
1.25±0.10
(0.049±0.004)
0.85±0.10
(0.033±0.004)
1.25±0.10
(0.049±0.004)
1.25±0.10
(0.049±0.004)
1.25±0.10
0.85±0.10
(0.049±0.004)
(0.033±0.004)
2.0±0.15
0.85±0.10
(0.079±0.006)
(0.033±0.004)
1.6±0.15
(0.063±0.006)
1.15±0.10
(0.045±0.004)
1.6±0.20
(0.063±0.008)
1.15±0.10
(0.045±0.004)
1.6±0.20
(0.063±0.008)
1.15±0.10
(0.045±0.004)
1.9±0.20
(0.075±0.008)
2.5±0.20
(0.098±0.008)
1.9±0.20
(0.075±0.008)
2.5±0.20
(0.098±0.008)
2.5±0.20
(0.098±0.008)
*1
T
V
P
A
A
C
V
D
G
D
G
D
D
Ｆ
L
Ｆ
L
F
N
M
N
M
M
e
0.15±0.05
(0.006±0.002)
0.25±0.10
(0.010±0.004)
0.18±0.08
(0.007±0.003)
0.35±0.25
(0.014±0.010)
0.35＋0.3/－0.25
(0.014＋0.012/－0.010)
0.35±0.25
(0.014±0.010)
0.25±0.15
(0.010±0.006)
0.5±0.25
(0.020±0.010)
CERAMIC CAPACITORS
22
0.5＋0.35/－0.25
（0.020＋0.014/－0.010）
0.5±0.25
(0.020±0.010)
0.3±0.2
(0.012±0.008)
0.5＋0.35/－0.25
（0.020＋0.014/－0.010）
□MK316（1206）
□MF316（1206）
□MJ316（1206）
3.2±0.15
(0.126±0.006)
1.6±0.15
(0.063±0.006)
0.6＋0.4/－0.3
（0.024＋0.016/－0.012）
□MK325（1210）
□MF325（1210）
3.2±0.30
(0.126±0.012)
2.5±0.20
(0.098±0.008)
0.6±0.3
(0.024±0.012)
□MJ325（1210）
3.2±0.30
(0.126±0.012)
2.5±0.20
(0.098±0.008)
0.6＋0.4/－0.3
（0.024＋0.016/－0.012）
0.9±0.6
(0.035±0.024)
4.5±0.40
3.2±0.30
(0.177±0.016)
(0.126±0.012)
Note : ※. LW reverse type, *1.Thickness code
□MK432（1812）
hq_c_mlcc_e-E06R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
1
8
■STANDARD
QUANTITY
Type
063
105
EIA（inch）
0201
0402
0204 ※
Dimension
［½½½
0.3
0.5
0.30
0.7
0.8
0.8
0.8
0306 ※
0805
0508 ※
316
325
1206
1210
0.50
0.85
1.25
1.25
0.85
1.15
1.6
1.15
1.9
2.5
2.5
Code
T
V
P
C
A
A
A
V
D
G
G
D
F
L
F
N
M
M
Standard quantity［pcs½
Paper tape
Embossed tape
15000
－
10000
4000
3000
（Soft Termination）
－
－
4000
－
－
4000
－
－
－
－
－
－
－
－
3000
（Soft Termination）
4000
－
3000
2000
（Soft Termination）
－
3000
2000
2000
500（T），1000（P）
500
107
0603
212
CERAMIC CAPACITORS
432
1812
Note : ※.LW Reverse type（□WK）
hq_c_mlcc_e-E06R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
The program uses TIM2, UART1, UART2 and ADC+DMA1 interrupts. It works fine without UART2. After adding UART2 interrupt, ADC+DMA1 interrupt cannot be entered after running for a few minutes. After chan...
There is a problem with the jtag port. I accidentally connected the pull-up resistor on pc0 of the jtag port to pc3. Will it cause the chip to deadlock or be damaged? How can I solve this problem? Now...
I have the following doubts when using a third-party DMO in the Windows CE 6.0 environment (the DMO is a dll file in the Windows directory): 1. I opened the registry and found the corresponding DMO in...
I recently bought this launchpad online and would like to ask where I can download the program that comes with this board? I want to modify this program and add some other functions....
I can't install the 430 emulator. The emulator is confirmed to be good and it worked well before. I reinstalled the system yesterday and it doesn't work. I tried several different systems and still ca...
[table] [tr][td][table] [tr][td][b]Has anyone seen the chip above? I would be very grateful if you could provide its manual. I will treat you to a meal as a token of my gratitude. [/b][/td][/tr] [/tab...
Google's driverless technology is not only an eye-catching technology, but also a subversion of the car usage model.
Those who have watched anti-terrorism films and TV dramas must have been im...[Details]
To differentiate their products in a crowded and competitive market, manufacturers of handheld devices often consider battery life and power management as key selling points for cell phones, PDAs, ...[Details]
July 11, 2012, Beijing - Altera Corporation (NASDAQ: ALTR) today announced the launch of 40-Gbps Ethernet (40GbE) and 100-Gbps Ethernet (100GbE) intellectual property (IP) core products. These core...[Details]
In the previous series, we have listed some basic knowledge of C language in Tables 1 to 3. We hope that beginners can strengthen their memory of the above tables and gradually learn to use them wh...[Details]
Overview
As a remote network communication control method with advanced technology, high reliability, complete functions and reasonable cost, CAN-bus has been widely used in various automa...[Details]
In the single-chip microcomputer system, in addition to display devices, sound devices are often used, and the most common sound device is the buzzer. Buzzers are generally used for some low-demand...[Details]
Among the many members of the single-chip microcomputer family, the MCS-51 series of single-chip microcomputers has occupied the main market of industrial measurement and control and automation eng...[Details]
From the previous section, we have learned that the timer/counter in the microcontroller can have multiple uses, so how can I make them work for the purpose I need? This requires setting the timer/...[Details]
Introduction
Today, as IC (integrated circuit) has developed to a super-large scale, IC design based on IP (Intellectual Property) cores and their reuse are important means to ensure the ef...[Details]
Zarlink Semiconductor has developed an ultra-low-power RF transceiver chip for pacemakers, neurostimulators, drug pumps, and other such implantable medical devices. It has high data rates, low power c...[Details]
1. Advantages of CAN-bus in coal mine communication
Coal mine production is a field closely related to the national economy and people's livelihood. Among them, coal mine safety is undoubtedly ...[Details]
Current sensing in automotive applications includes controlling the current through solenoids and injectors. For example, during diesel injection, we rapidly increase the current to the induction i...[Details]
Li/SOCl2 batteries (lithium sub-cells) have the advantages of high operating voltage, stable discharge voltage, wide operating temperature range and long storage life, and have been widely used in ...[Details]
Since the first rechargeable battery was invented in 1859, batteries have been developed for a century and a half. With the improvement of human science and technology and the advancement of manufa...[Details]
A common problem encountered in electronic design is the testing of the transmission characteristics of the circuit under test (DUT). The transmission characteristics here include gain and attenuat...[Details]
stm32/stm8
京公网安备 11010802033920号
EEWORLD
