HL72101-1300-CH datasheet, PDF

HL72101-1300-CH: DescriptionBoard Connector; CategoryThe connector The connector; File Size264KB，2 Pages; ManufacturerFOXCONN; Websitehttp://www.fit-foxconn.com/

Download Datasheet Parametric View All

HL72101-1300-CH Overview

Board Connector

SPECIFICATIONS

1.ELECTRICAL CHARACTERISTICS:

1-1. CONTACT CURRENT RATING : 2 AMPERES PER CONTACT.

1-2. LOW LEVEL CONTACT RESISTANCE : 30 MILLIOHMS MAX.

INITIALLY;

40 MILLIOHMS MAX. AFTER LIFE TESTING.

1-3. INSULATION RESISTANCE: 1000 MEGOHMS MIN. .

1-4. DIELECTRIC WITHSTANDING VOLTAGE: 500VAC FOR 1 MINUTE.

Header Connector

HL72 Series

T/ H,PIN SOCKET

2.00mm Pitch

2.MECHANICAL CHARACTERISTICS:

2-1. CONTACT RETENTION FORCE: 1.36 Kgf MIN. PER CONTACT.

2-2. INSERTION FORCE: 0.40Kgf MAX. PER. PIN WITHDRAWL FORCE:

0.020Kgf MIN. PER. PIN

2-3. DURABILITY: 50 CYCLES

ENVIRONMENTAL DATA:

3-1. SOLDERABILITY: PASSED EIA-364-52.

3-2. OPERATION TEMPERATURE: -55℃ TO +105℃.

3-3. HARMFUL MATERIAL CONTROL PLEASE FOLLOW FOXCONN'S

DOC. "EPI12".

DRAWING

All specification & dimensions are subject to change, please call your nearest Foxconn sales representative for update information.

usbkey: Engaged in professional cos development work, familiar with the working principles of various cos, willing to undertake the following work for a long time: 1. Develop various USB dongles and USBkey de...; cclccl985 Embedded System

Save and restore BIOS parameters: Save and restore BIOS parameters The so-called system settings refer to the hardware device information that users can select and install. Usually, it must be recorded in some form so that when the sy...; wo2000ailuo PCB Design

Why does 2450 eboot crash when downloading NK DNW0.6 over 40M?: As the title says. It is normal to download NK of more than 20M. If I download 40M, the progress bar of DNW will stop after two-thirds of the download. Here are some printed information: _OEMPlatformI...; zhanghuiyang Embedded System

[FPGA warning message] No load capacitance is specified for output management: Warning: Found xx output pins without output pin load capacitance assignment Reason: No load capacitance is assigned to the output pin Solution: This function is used to estimate TCO and power consump...; eeleader FPGA/CPLD

About LVDS Levels in FPGA: I use AD9230, which outputs LVDS level. I connect its data to FPGA. For example, the AD data line is: AD0+ to AD12+ and AD0- to AD12-. How to process this data in FPGA? Is it to subtract the positive ...; dahaotile FPGA/CPLD

Timer A in ADC is used as sampling trigger source: Why can't I enter the ADC interrupt when using timer A as the trigger source?#includemsp430x14x.h #define M 4 static unsigned int index = 0 ;unsigned int results[M]; void ADC12_Init ( void ) ;void UAR...; Lucky_Hu Microcontroller MCU

Popular Components