Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1096_MIL-PRF-32535_X7R • 8/26/2021
2
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Reliability Surface Mount Capacitors, MIL-PRF-32535, 4 – 100 VDC (X7R Dielectric)
Packaging C-Spec Ordering Options Table
Packaging Type
1
Standard Packaging (Waffle Tray)
7" Tape & Reel
1
Packaging/Grade
Ordering Code (C-Spec)
Not required (blank)
Contact Sales
Default packaging with no C-Spec is “Waffle Tray,” and is recommended for order quantities of less than 250 pieces. See Waffle Tray packaging
information section for additional details.
1
See Tape & Reel Packaging information section of the datasheet for additional details.
Dimensions per MIL-PRF-32535 – Inches (Millimeters)
W
L
T
B
S
EIA
Size
Code
0402
0603
0805
1
1206
2
1210
2
1812
2
2220
2
1
Metric
Size
Code
1005
1608
2012
3216
3225
4532
5650
L
Length
0.040+0.006/−0.004
(1.02+0.15/−0.10)
0.063+0.008/−0.006
(1.60+0.2/−0.15)
0.079+0.012/−0.01
(2.01+0.3/−0.25)
0.126+0.012/−0.01
(3.20+0.3/−0.25)
0.126+0.012/−0.01
(3.20+0.3/−0.25)
0.178±0.012
(4.52±0.30)
0.224±0.016
(5.69±0.41)
W
Width
0.020+0.005/−0.004
(0.51+0.13/−0.10)
0.032+0.008/−0.006
(0.81+0.2/−0.15)
0.050+0.012/−0.01
(1.27+0.3/−0.25)
0.063+0.012/−0.01
(1.60+0.3/−0.25)
0.098+0.012/−0.010
(2.49+0.3/−0.25)
0.126±0.012
(3.20±0.30)
0.197±0.016
(5.00±0.41)
T
Thickness
0.025
(0.64)
0.040
(1.02)
0.062
(1.57)
0.071
(1.8)
0.110
(2.79)
0.110
(2.79)
0.110
(2.79)
B
Bandwidth
0.004 (0.100)
Minimum
0.016 ±0.008
(0.41±0.20)
0.020±0.010
(0.51±0.25)
0.020±0.014
(0.51±0.36)
0.020±0.014
(0.51±0.36)
0.024±0.018
(0.61±0.46)
0.025±0.018
(0.64±0.46)
Maximum
Part Weight
(mg)
3
1.6
6.3
20
57
108
216
430
Mounting
Technique
Solder reflow
only
Solder wave or
solder reflow
Solder reflow
only
For EIA 0805 solder dipped termination finish, add 0.020 (0.51) to the positive length tolerance and 0.015 (0.38) to the positive width and thickness
tolerance.
2
For EIA 1206, 1210, 1812 and 2220 solder dipped termination finishes, add 0.025 (0.64) to the positive length tolerance and 0.015 (0.38) to the positive
width and thickness tolerance.
3
Maximum Part Weight represents the maximum weight in the given case size for all voltages.
Hello everyone, my laptop is IBMt43 1871A85, my wireless network card signal reception is not very good, so I want to buy a PCM interface network card, please recommend one. Thank you....
I have a question. If I do not add voltage to the be section of an npn transistor, but only add a voltage to the ce section (a voltage in the opposite direction to the collector), then the emitter jun...
I'm new to DSP and I'm a little confused. If I operate DSP peripherals, such as spi AD, do I need to describe the register address? The microcontroller has a header file to describe these peripherals....
There are three types of mobile TV: one is based on analog TV broadcasting network, another is based on mobile communication network, and the other is based on digital broadcasting network. The f...[Details]
I. Introduction
In the field of power conversion, isolated converters (forward, flyback, and double-ended) with low output DC voltage all use MOSFET as the rectifier device. Since these devi...[Details]
Editor's note: In order to help technicians or engineers who have knowledge of PIC microcontroller assembly language quickly master the method of using C language to program PIC microcontrollers, t...[Details]
Toyohashi University of Technology demonstrated electric field coupled wireless power supply technology using life-size car tires and roads at the wireless technology exhibition "Wireless Technolog...[Details]
As a simple and practical input device, buttons have been used in various microcontroller application systems and are ubiquitous. However, the buttons used in different practical occasions are also...[Details]
At very low temperatures, certain metals and alloys lose their resistance to electric
current
and become
superconductors
. Two parameters that are often measured are the transition ...[Details]
1. When the slip speed regulating motor is undergoing frequency conversion and energy saving transformation, the original excitation box (referred to as the speed regulating box) and the original s...[Details]
The rectified DC voltage is then converted back to AC using power electronics such as insulated gate bipolar transistors.
The output voltage is switched on and off at a high frequency, control...[Details]
The serial interface real-time clock chip DS1302 launched by Dallas Company in the United States can trickle charge the backup battery of the clock chip. Due to the main features of the chip such a...[Details]
1 Development of LED Film and Television Lighting
1.1 The significance of developing film and television lighting
Lighting power consumption accounts for a large proportion of the total p...[Details]
At present, with the diversification of portable products and the almost harsh requirements for audio and video parts, the power consumption requirements of the whole machine have been raised to a ...[Details]
Mobile phones, MP3s, tablet computers, laptops, digital cameras, handheld game consoles, navigation devices, etc., all these mobile devices are powered by mobile batteries, and the battery life is ...[Details]
The installation locations of DC-DC converters are relatively scattered. DC-DC converters can be found on the power board, main board, logic control board and other circuit boards of PDP color TVs....[Details]
It should be understood as follows: DC-DC means direct current to direct current (conversion of different DC power values). Anything that meets this definition can be called a DC-DC converter, incl...[Details]
Current
measurement:
Magnetic balance Hall current
sensor
is used
. The sensor can measure AC from DC to 100kHz.
In automatic measurement and control systems, it is often nec...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
