COMMUNICATIONS, DATA, CONSUMER DIVISION
D-Subminiature
Pin-in-Paste Connectors
Dsub Pin-in-Paste.indd
1
2009-4-9
10:07:03
D-Subminiature Pin-in-Paste
DESCRIPTION
The D-Subminiature connectors are
one of the most popular IO solutions,
addressing segments such as
Telecommunications, Industrial,
Instrumentation and Medical.
Thanks to his very complete
D-Sub range, FCI is one of the most
experienced suppliers.
Now we are at the forefront once
again in bringing you Pin-in-Paste
(Through Hole Reflow) versions.
PIN-IN-PASTE
Pin-in-Paste technology (PIP) allows
the use of Through Hole product in
SMT manufacturing processes.
The connectors are automatically or
manually placed on the board, and
then soldered in the same operation
as the SMT components.
Thanks to the Pin-in-Paste technology,
the mechanical strengths of the
Through Hole Technology soldering
is maintained - still an important
requirement for connectors nowadays
in many industrial or telecom
applications.
BENEFITS
… An innovative solution for savings on the total applied costs!
Time saving:
Pin-in-Paste connectors can be automatically positioned on the board using automatic
pick and place processes (vacuum nozzle or gripper) thanks to an improved true
positioning whereas traditional solder to board processes require a manual placement.
Higher quality
•
Pin-in-Paste is a more stable process than wave soldering as it does not need
constant ajust once set-up.
•
Less control time after reflow process and less re-work time for repairing.
Fast and easy move from a wave soldering to a reflow process
Surface Mount Technology D-Sub’s require a specific PCB design.
No re-design of the board for Pin-in-Paste:
• Same layouts
• Same hole diameters for signal contacts.
Higher robustness in Pin-in-Paste:
Thanks to the through hole pins and metal pegs.
Makes it possible to eliminate wave soldering.
•
For applications using a few remaining components requiring wave soldering,
FCI D-Sub Pin-in-Paste can help to avoid wave soldering completely.
2
www.fci.com/dsub
Dsub Pin-in-Paste.indd
2
2009-4-9
10:07:04
D-Subminiature Pin-in-Paste
CONNECTOR DESIGN
In order to achieve optimum soldering
results, FCI launches dedicated
Pin-in-Paste connectors.
These connectors are fully adapted to
Pin-in-Paste processing in all aspects,
including plastic material, metal peg,
housing design, pin length,
and packaging.
PLASTIC MATERIAL:
The FCI D-Sub Pin-in-Paste connectors
are molded in high temperature plastic
able to withstand a temperature
exposure up to 260°C peak for 10 to
30 seconds in a convection infrared or
vapor-phase reflow oven.
PACKAGING:
METAL PEG:
To ensure electrical continuity and low
insertion forces, a specific metal peg
has been designed. These metal pegs
significantly increase the connection
robustness after soldering.
The FCI D-Sub connectors can be packaged in different ways depending on existing
installed processes.
•
Tray packaging
: ideal for manual placing and low volume applications.
•
Tape and reel packaging
with or without pick-up caps: fully compatible with
automatic pick and place processes like grippers or vacuum nozzles, for medium and
high volume applications.
HOUSING DESIGN:
Standoffs are specifically designed
around the metal pegs to avoid any
paste interaction between the
back housing and the PCB.
Consequently, the paste can spread
around the metal peg, keeping the
connector in its correct and original
position.
PIN LENGTH:
The termination length beyond
the bottom of the PCB is shorter than
traditional solder-to-board products.
Thus, the risk of pushing out the solder
paste when setting the pin into the PCB
hole is very much limited. The solder
paste will not stick on the pin tip or even
fall off completely, but stays around the
pin for free flow during soldering.
FCI uses pin lengths corresponding to
the PCB thickness +0.4 mm.
For a 1.6 mm PCB thickness, the pin
length is 2.0 mm.
www.fci.com/dsub
3
Dsub Pin-in-Paste.indd
3
2009-4-9
10:07:05
DELTA D signal right angle Pin-in-Paste
In compliance with DIN 41652:
•
Reflow type: JSTD-020C
•
Packaging: IEA-481-B
•
Plating: BELLCORE CO GR-1217
PART NUMBER
Series
Number of contacts
Contacts
Termination
Code
13A
33E
D
9 - 15 - 25 - 37
P :
Pin
S :
Socket
09
P
13A
6
RV
12
LF
Type
Right angle - Europe standard
Right angle - US standard
Footprint/Pitch
10.4 / 2.54 mm
8.08 / 2.84 mm
Termination length
2.0 mm
2.0 mm
PCB thickness
1.6 mm
1.6 mm
Plating
Mounting options
6 :
High performance class (> 500 mating/unmating)
RL :
Insert M3 + Metal peg + Electrical continuity
RX :
Insert UNC 4-40 + Metal peg + Electrical continuity
RV :
Female screw UNC 4-40 + Metal peg + Electrical continuity
09 :
Tray for manual positionning
12 :
Tape and Reel for automatic pick and place
LF :
RoHS compatible EU directive 2002/95/EC
RL
RX
RV
Packaging
RoHS status
Recommended layouts and pad dimensions
Contacts
09
15
25
37
B
±0.10
24.99
33.32
47.04
63.50
F
10.96
19.18
33.12
49.68
G
8.22
16.44
30.36
46.92
Technical data
•
Materials:
- Shell: Steel, nickel plated
- Housing: Thermoplastic HT UL94VO
- Contacts: Copper Alloy
- Active part: Gold over nickel
- Termination: Matt Tin over nickel
- Accessories: Brass
- Front accessories: Nickel
- Metal pegs: Tin over nickel
•
Operating temperature range:
-55° to 125°C
•
Reference information:
Product lead free in accordance to
RoHS 2002/EC/95
•
Mechanical performances:
mating/unmating cycles: 500 min
•
Electrical performances:
- Current rating: 5A
- Insulation resistance:
≥
5000 MΩ
- Contact resistance: <10mΩ
- Dielectric withstanding voltage:
1000 Vrms
4
www.fci.com/dsub
Dsub Pin-in-Paste.indd
4
2009-4-9
10:07:05
DELTA D signal right angle Pin-in-Paste
SPECIFIC DIMENSIONS
Dimensions
Dimensions
A
±0,38
P
S
P
S
P
S
ons in mm
J
±0,10
Termination 13
L
±0,10
Termination 33
N
±0,30
Te rm in a tio n le n g
th
B
±0,12
24.99
B
±0,12
24.99
47.04
33.32
47.04
33.32
47.04
47.04
63.50
63.50
C
±0,10
16.96
C
±0,10
16.96
39.12
25.18
39.12
25.18
39.12
39.12
55.68
55.68
G
-0/+0,25
J
±0,10
L
±0,10
I3A 33E
N
±0,30
I3B
9
15
25
Dimensi
25
30.81
A
±0,38
30.81
53.03
39.14
53.03
39.14
53.03
53.03
3 32
69.32
4
69.32
5.90
-0/+0.15
G
-0/+0,25
6.05
5.70
5.90
-0/+0.15
6.05
5.70
6.05
5. 0
.7
6.05
Termination 13
11.67
11.67
Termination 33
9.50
Termination lenght
2.00
2.90
I3A 33E
2.00
I3B
2.90
9.50
11.67
11.67
11.67
11.67
11.67
11.67
9.50
9.50
9.50
9.50
9.50
9.50
2.00
2.00
2.00
2.00
2.00
2.00
2.90
2.90
2.90
2.90
2.90
2.90
37
P
S
Dimensions in mm
www.fci.com/dsub
5
Dsub Pin-in-Paste.indd
5
2009-4-9
10:07:06
京公网安备 11010802033920号
EEWORLD
