MKC 1858
Not for new designs
Vishay Roederstein
Metallized Polycarbonate Film Capacitor
Related Document: IEC 60384-6
Dimensions in millimeters
L
Max.
W
Max.
Marking
FEATURES
Product is completely lead (Pb)-free.
Product is RoHS compliant.
CAPACITANCE RANGE
0.01µF to 0.33µF
0.6
H
Max.
e3
RoHS
COMPLIANT
CAPACITANCE TOLERANCES
± 20% (M), ± 10% (K), ± 5% (J)
6.0
- 1
±
0.4
5.0
±
0.4
Ø 0.5
RATED VOLTAGES (U
R
)
63 VDC, 100 VDC
PERMISSIBLE AC VOLTAGES (RMS) UP TO 60HZ
40 VAC, 63 VAC
MAIN APPLICATIONS
High frequency coupling and decoupling for fast digital and
analog IC’s; filter, timing and integrating circuits.
TEST VOLTAGE (ELECTRODE/ELECTRODE)
1.6 x U
R
for 2 s
MARKING
Manufacturer's logo/type/C-value/rated voltage/tolerance/
date of manufacture
INSULATION RESISTANCE
Measured at 100 VDC (63 VDC series measured at
50 VDC) after one minute
3750 MΩ minimum value (50,000 MΩ typical value)
DIELECTRIC
Polycarbonate film
CAPACITANCE DRIFT
Up to + 40°C, ± 1% for a period of two years
ELECTRODES
COATING
Vacuum deposited aluminum
Flame retardant plastic case (UL-class 94 V-0) red, epoxy
resin sealed
DERATING FOR DC AND AC.CATEGORY VOLTAGE U
C
At + 85°C: U
C
= 1.0 U
R
At + 100°C: U
C
= 0.8 U
R
SELF INDUCTANCE
~ 6 nH measured with 2mm long leads
CONSTRUCTION
LEADS
Extended metallized film (refer to general information)
Tinned wire
PULL TEST ON LEADS
RELIABILITY
≥
30 N in direction of leads according to IEC 60068-2-21
Operational life > 300,000 h
Failure rate < 1 FIT (40°C and 0.5 x U
R
)
For further details, please refer to the general information
available at www.vishay.com/doc?26033.
IEC TEST CLASSIFICATION
55/100/21, according to IEC 60068
OPERATING TEMPERATURE RANGE
- 55°C to + 100°C
MAXIMUM PULSE RISE TIME
PCM
(mm)
5
Maximum Pulse Rise Time d
v
/d
t
[V/µs]
63 VDC
17
100 VDC
24
If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted.
DISSIPATION FACTOR TAN
δ
MEASURED AT
1kHz
10kHz
100kHz
C
≤
0.1µF
3 x 10
-3
4 x 10
-3
10 x 10
-3
Maximum values
0.1µF < C
≤
1.0µF
3 x 10
-3
4 x 10
-3
—
Document Number: 26026
Revision: 05-Jul-05
For technical questions contact; dc-film@vishay.com
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
京公网安备 11010802033920号
EEWORLD
