All temperatures refer to topside of the package, measured on the package body surface.
260°C Reflow Profile
W
&
W &
3°C/seconds max.
150°C
200°C
60-180 seconds
3°C/seconds max.
217°C
60-150 seconds
max 260°C
Time within 5°C of actual
Peak Temperature (tp)
Ramp-down Rate
6°C/seconds max.
20-40 seconds max.
W
&
W &
8 minutes max.
Average ramp-up rate (TL to TP)
Preheat - Temperature min Tsmin
- Temperature min Tsmax
- Time (min to max) (ts)
Tsmax to TL -Ramp-up Rate
Time maintained above - Temperature (TL)
- Time (TL)
Peak Temperature (Tp)
E
Time 25°C to Peak Temperature
Time maintained above
- Temperature (TL)
- Time (tL)
217°C
60-150 seconds
All temperatures refer to topside of the package, measured on the package body surface.
4 of 5
Ordering Information
EX - 401 0 - D A P - 108 0 - 10M0000000
Frequency
Frequency Control
20
Configuration
Thru-hole
Stability Code
Supply Voltage
508: ±50ppb
758: ±75ppb
107: ±100ppb
6: Fixed Frequency (+5 dBm)
7: Electrical Tuning (+5 dBm)
d
d
^
Z
Z
^
&
&
d
^
d
108 (+/-10ppb)
208 (+/-20ppb)
308 (+/-30ppb)
508 (+/-50ppb)
758 (+/-75ppb)
107 (+/-100ppb)
A: -55°C to +85°C E: -40°C to +85°C J: -20°C to +70°C P: 0°C to +50°C
10-20MHz
10-20MHz
10-50MHz
10-80MHz
10-100MHz
10-20MHz
10-50MHz
10-100MHz
10-20MHz
10-20MHz
10-50MHz
10-100MHz
10-20MHz
10-20MHz
10-50MHz
10-100MHz
Aging Table
Temperature Range and Stability Table
Notes:
Stability/Temperature A: -55°C to +85°C
E: -40°C to +85°C
J: -20°C to +70°C
1.
108
(+/-10ppb)
frequencies.
10-30MHz
2.
208 (+/-20ppb)
10-30MHz
10-30MHz
308 (+/-30ppb) 10-30MHz
10-30MHz
10-30MHz
10-30MHz
4.
Subject to technical modification.
Contact factory for availability.
P: 0°C to +50°C
For Additional Information, Please Contact
USA:
Vectron International
Europe:
Vectron International
Asia:
Vectron International
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.
No rights under any patent accompany the sale of any such product(s) or information.
[i=s]This post was last edited by fwjieok on 2014-7-7 00:38[/i] [align=center][size=5]Playing with helper2416 - Testing after receiving the board[/size][/align] [align=left][size=4]I was having lunch ...
Working principle: The circuit is shown in the figure. After the 220V mains is stepped down by transformer T and rectified by VD1, a DC voltage of about 9V is obtained on capacitor C1. This voltage ch...
The first line of the LCD screen shows the clock, for example, 5h40m45s. When it is just started, it is 0h0m0s. You can set the time by pressing a button. The next line shows the stopwatch unit in s. ...
Asking for a friend: Who has an ADI emulator? ? It can be a BF53X compatible one, new or second-hand, I hope it is cheap, easy to use, and has all the accessories :)...
Hey guys! Yesterday I made a QX2303 boost circuit, following the circuit and recommended components in the manual:Input capacitance = output capacitance = 22uFInductance = 47uHSwitching tube: 1N5819Th...
Embedded System
京公网安备 11010802033920号
EEWORLD
