14/10/09
WT12
Bluetooth®
Module™ Description
WT12 is a next-generation, class 2,
Bluetooth
2.1 +
EDR module. It introduces three times faster data rates
compared to the existing
Bluetooth
1.2 modules even with
a lower power consumption. WT12 is a highly integrated
and sophisticated
Bluetooth
module, containing all the
necessary elements from
Bluetooth
radio antenna to
a fully implemented protocol stack. Therefore WT12
provides an ideal solution for developers who want
to integrate
Bluetooth
wireless technology into their
designs with limited knowledge of
Bluetooth
and RF
technologies.
WT12 module combined with Bluegiga’s complete
development, testing and verification services and
excellent developer support, OEMs and designers ensure
that their products reach the market rapidly and cost-
efficiently in relation to time and resources. Bluegiga
has extensive in-house knowledge of both software and
hardware offering customers a single point of contact to
all
Bluetooth
related issues.
By default WT12 module is equipped with powerful and
easy-to-use iWRAP firmware. iWRAP enables users
to access
Bluetooth
functionality with simple ASCII
commands delivered to the module over serial interface.
Entering the world of
Bluetooth
wireless technology
could not be easier!
With iWRAP software you have several implementation
options:
iWRAP can be configured to operate autonomously,
- as a
Bluetooth
cable replacer
To create sophisticated applications - a host system
can be used to control iWRAP with ASCII commands
With The GPIO interface in WT12 module can be used
to connect host and iWRAP
Besides the iWRAP firmware Bluegiga also offers several
other firmware options for WT12 module. Standard Host
Command Interface (HCI) firmware is supported and
an ideal solution for systems where the host system
is capable of running the entire
Bluetooth
stack and
profiles and WT12 is utilized as the physical radio over
UART or USB interface.
Key Features
Bluetooth
Class 2
Integrated chip antenna
Enhanced Data Rates (EDR) with data throughput up
to 2-3Mbps
Support for Adaptive Frequency Hopping (AFH) and
802.11 co-existence
USB version 2.0
UART with bypass mode
8Mbits of flash memory
Supported
Bluetooth
profiles: SPP, DUN, OBEX OPP,
HFP v.1.5, DID, HID + HCI
Industrial temperature range from -40°C to +85°C
RoHS compliant
Pin-to-pin compatible with WT11 module
Simple iWRAP™ firmware for controlling
Bluetooth
wireless technology
Fully qualified end product with
Bluetooth
2.1 + EDR,
CE and FCC
Information subject to changes
14/10/09
TECHNICAL DATA
Firmware
iWRAP™ command interface to access the
Bluetooth
functionality and to configure the parameters with simple
ASCII commands
HCI firmware available for UART and USB interfaces
Possibility to use / develop custom firmware
128-bit
Bluetooth
encryption available for all firmware
options
Development and Evaluation
WT12-A Evaluation Kit EKWT12-A
CSR’s BlueLab Professional SDK
Other Products
WT11 Class 1
Bluetooth
Module™
WT32
Bluetooth
Audio Module™
Bluegiga Access Server™ 2291, 2293
Hardware
Bluetooth
Class 2 radio (range up to 30 meters)
- Nominal output power +4 dBm
- Nominal sensitivity -84 dBm
- Uses 2.4 GHz ISM band
- Based on CSR’s BC04 chipset
Integrated antenna
Host processor interface with UART or USB
SPI interface for firmware and parameter upgrades
6xGPIO
PCM interface for audio applications
Supply voltage: regulated 3.2 – 3.4 VDC
Power consumption with iWRAP interface:
- Link active min: 7mA, max: 60mA
- Link active in sniff mode: 2.5mA
- Link active in park mode: 2.5mA
- Idle with deep sleep: <1mA
PCB form factor: 26 x 14 x 2.3 mm
Operating temperature: -40 ºC to +85 ºC
Metal shielding to prevent RF interference
Reference designs available for HCI, cable replacement
and audio applications
Certifications
Bluetooth
2.1 + EDR
CE, FCC, IC
Applications
Cable replacement
Point-of-sales systems
Barcode readers and pay terminals
Telemetry and machine-to-machine devices
Logistics and transportation systems
Automotive inspection and measurement systems
Medical systems
Fitness and sports telemetry devices
PDAs and other portable terminals
PCs and laptops
Product Codes
iWRAP Firmware, chip antenna
HCI Firmware (USB), chip antenna
Custom Firmware, chip antenna
WT12-A-AI
WT12-A-HCI
WT12-A-C
Information subject to changes
For more information about Bluegiga Technologies, please contact:
Bluegiga Technologies Oy
Sinikalliontie 5 A
02630 Espoo, Finland
Phone: +358 9 435 50 60
Fax: +358 9 435 50 660
www.bluegiga.com
sales@bluegiga.com
© Bluegiga Technologies 2000-2009.
Bluegiga Technologies takes no responsibility for any mistakes that
might appear in this document. It reserves the right to change devices,
software or specifications detailed here at any time without notice,
and does not make any commitment to update the information
contained here. Bluegiga products are not authorised for any use as
critical components in life support devices or systems.
Bluegiga Access Server, Access Point, iWRAP and WRAP THOR are
trademarks of Bluegiga Technologies.
The
Bluetooth
trademark and logo are registered trademarks and
are owned by the Bluetooth SIG, Inc.