Fiber Optic Receiver
OPF500 Series
OPF500 Series
•
•
•
•
•
Interfaces with all logic circuits
Two output options
Optimized for fiber optic applications using 50 to 200 mi-
cron fibers
Data rate to 200kbps NRZ
Available with multiple packaging options
The OPF500 series receiver contains a monolithic integrated circuit which incorporates a photodiode, linear ampli-
fier, a voltage regulator, and a Schmitt trigger on a single silicon chip. These receivers are designed for short haul
fiber optic systems using 850 nm LEDs such as Optek’s OPF300 series.
These devices feature TTL/LSTTL compatible logic level output. An internal voltage regulator allows operation
with supply voltages ranging from 4.5V to 16V.
Applications
♦
♦
♦
♦
Industrial Ethernet equipment
Copper-to-fiber media conversion
Intra-system fiber optic links
Video surveillance systems
Part Ordering Information
Part Number
OPF500
OPF505
OPF507
OPF510
OPF512
Description
Buffer, 10kW Pull-Up
Plastic Cap Component
Buffer, 10kW Pull-Up
Metal Can Component
Buffer, 10kW Pull-Up
Metal ST Receptacle
Inverter, 10kW Pull-Up
Plastic Cap Component
Inverter, 10kW Pull-Up
Metal ST Receptacle
This component is susceptible to dam-
age from electrostatic discharge (ESD).
Normal static precautions should be
taken in handling and assembly of this
component to prevent ESD damage or
degradation.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc.—
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (800) 341-4747 FAX: (972) 323– 2396 sensors@optekinc.com www.optekinc.com
RoHS
Issue A
05/2013
Page 1 of 5
Fiber Optic Receiver
OPF500 Series
Absolute Maximum Ratings
Storage Temperature
Operating Temperature
Lead Soldering Temperature (for 10 seconds)
Supply Voltage
Sinking Current
Power Dissipation
Open Collector Power Distribution
Voltage at Output
-65° C to +100° C
-40° C to +85° C
260° C
18 V
16 mA
200 mW
40mW
30 V
Electrical/Optical Characteristics
4.5 V
≤
V
CC
≤
16.0 V, T
A
= 25°C — unless otherwise specified
SYMBOL
V
CC
V
OH
V
OL
I
CC
P
IN
t
r
t
f
BW
PWD
PARAMETER
Supply Voltage
High Level Output Voltage
Low Level Output Voltage
Supply Current
Input Sensitivity
Rise Time
Fall Time
Bandwidth
Pulse Width Distortion
MIN
4.5
VCC - 1.5
TYP
MAX
16.0
UNITS
V
V
CONDI-
TIONS
Buffer: P
IN
> 2.0 µW
Inverter: P
IN
< 0.1 µW
Buffer: P
IN
< 0.1 µW
Inverter: P
IN
> 2.0 µW
No output load
λ
p
= 850 nm
Buffer
Inverter
Inverter
Buffer
P
IN
= 1.5 µW (peak)
V
CC
= 5.0 V
0.4
5.0
12.0
2.0
300
100
300
100
100
±10
V
mA
µW
ns
ns
kHz
%
P
IN
> 2.0 µW, 50% duty cycle
1 µW < P
IN
< 100 µW,
f
= 20 kHz
50% duty cycle
RoHS
Issue A
05/2013
Page 2 of 5
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc.—
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (800) 341-4747 FAX: (972) 323– 2396 sensors@optekinc.com www.optekinc.com
Fiber Optic Receiver
OPF500 Series
Mechanical Outline — OPF500, OPF510
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc.—
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (800) 341-4747 FAX: (972) 323– 2396 sensors@optekinc.com www.optekinc.com
Issue A
05/2013
Page 3 of 5
Fiber Optic Receiver
OPF500 Series
Mechanical Outline — OPF505
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A
05/2013
Page 4 of 5
OPTEK Technology Inc.—
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (800) 341-4747 FAX: (972) 323– 2396 sensors@optekinc.com www.optekinc.com
Fiber Optic Receiver
OPF500 Series
Mechanical Outline — OPF507, OPF512
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc.—
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (800) 341-4747 FAX: (972) 323– 2396 sensors@optekinc.com www.optekinc.com
Issue A
05/2013
Page 5 of 5
京公网安备 11010802033920号
EEWORLD
