SA324498F25GSR datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Passive components> Crystal/resonator> SA324498F25GSR

SA324498F25GSR: DescriptionSeries - Fundamental Quartz Crystal, 49.86MHz Nom,; CategoryPassive components Crystal/resonator; File Size304KB，5 Pages; ManufacturerCTS; Environmental Compliance

Download Datasheet Parametric View All

SA324498F25GSR Overview

Series - Fundamental Quartz Crystal, 49.86MHz Nom,

SA324498F25GSR Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	145150157157
Reach Compliance Code	compliant
YTEOL	7.33
Other features	AEC-Q200; AT-CUT
Ageing	3 PPM/YEAR
Crystal/Resonator Type	SERIES - FUNDAMENTAL
Drive level	10 µW
frequency stability	0.005%
frequency tolerance	20 ppm
JESD-609 code	e4
Installation features	SURFACE MOUNT
Nominal operating frequency	49.86 MHz
Maximum operating temperature	105 °C
Minimum operating temperature	-40 °C
physical size	3.2mm X 2.5mm X 0.8mm
Series resistance	50 Ω
surface mount	YES
Terminal surface	GOLD OVER NICKEL

Preview

Download Datasheet

View All

SA324 Series

Features



Automotive Grade Quartz Crystal

AEC-Q200 Compliant

Hermetic Ceramic Surface Mount Package

Fundamental and 3

Overtone Crystal Design

Frequency Range 8 – 160MHz

Frequency Tolerance, ±30ppm Standard

Frequency Stability, ±50ppm Standard

Operating Temperature Range to -55°C to +125°C

Tape and Reel Packaging, EIA-418

Part Dimensions:

3.2 × 2.5 × 0.8mm

•

20.716mg

Standard Frequencies – see Page 5 for developed frequencies.

* Check with factory for availability of frequencies not listed.

Applications



Automotive Electronics



Mobile Multimedia/Infotainment



Car Navigation Systems



Internet of Things [IoT, IIot]



Microcontrollers and FPGAs



Wireless Communication



Ethernet/GbE/SyncE



Medical Electronics



Commercial Military & Aerospace

Description

CTS Model SA324 incorporates a low cost, high Q, small size quartz resonator specifically developed to operate

over extended temperature ranges for use in automotive electronics.

Ordering Information

Model

SA324

Frequency Code

[MHz]

XXX or XXXX

Mode of

Oscillation

Tolerance

@ +25°C

Temperature

Stability

Temperature

Range

Load

Capacitance

Packaging

Code

Frequency

Product Frequency Code

Code

Tolerance

±10ppm

±15ppm

±20ppm

±30ppm

±50ppm

Code

Stability

±15ppm

±20ppm

±30ppm

±50ppm

±100ppm

±150ppm

Temp. Range

-40°C to +85°C

-40°C to +105°C

-40°C to +125°C

-40°C to +150°C

-55°C to +105°C

-55°C to +125°C

Packing

Code

3k pcs./reel

Code

Mode

Fundamental

3rd Overtone

Code Capacitance Code Capacitance

7pF

16pF

8pF

18pF

9pF

20pF

10pF

24pF

12pF

30pF

13pF

Series

Notes:

Refer to document 016-1454-0, Frequency Code Tables. 3-digits for frequencies <100MHz, 4-digits for frequencies 100MHz or greater.

Available with all stability codes.

Available with stability codes 3, 5, 6 and 7.

Available with stability codes 5, 6 and 7.

Stability codes 6 and 7. Contact factory for code 5 availability.

Not all performance combinations and frequencies may be available.

Contact your local CTS Representative or CTS Customer Service for availability.

This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this

product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification.

DOC# 008-0421-0 Rev. C

Page 1 of 5

equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.

Recommended Resources

Single-phase power factor measuring instrument circuit b

Thyristor rough processing line form circuit (1)

Circuit for converting 3-digit BCD code to analog level

Single-phase watt-hour meter measures active power and enters the wiring

Relay delay pull-in circuit

Simple diagram of staged charging

An error occurred in the addition module in DSP Builder!: When using the adder module in DSP for simulation , the error message "Could not infer a type for port fir16/Parallel Adder Subtractor:data" appears. What is going on? Please help me , I am designing ...; eeleader FPGA/CPLD

【GD32L233C-START Review】1. Unboxing: Finally received the GD32L233C-Start development board, the packaging is rather simple, there is only a bare board, and no USB cable is given. I have to complain here, the board does not have soldered...; hehung GD32 MCU

Regarding the Platform Builder annual upgrade package upgrade issue?: If I have the annual updates for 2004/2005/2006/2007, should I just install the 2007 update, or should I first install 2004, then 2005, then 2006, then 2007?...; lai236 Embedded System

Born only for uC, uS growth process 20 (SPI->M25P80 timing adjustment): This week was very busy, and more than half of the weekend has passed, and I feel quite uneasy. Because, SPI still hasn't been adjusted. This week was very busy, and I basically spent Monday to Wednes...; 辛昕 Programming Basics

The design of the first DSP board: It has been more than a month since I started to get in touch with DSP on August 1, 2006. It is not easy to debug and familiarize myself with DSP on my own development board and design DSP by myself n...; liumnqti DSP and ARM Processors

Heroes, please come in~~~: If the TX and RX of the USART2 peripheral to be used in the program correspond to PA2 and PA3 respectively, and the PA2 and PA3 pins are connected to other devices, but in order to use USART2, use thi...; melon_1 stm32/stm8

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components