Type 168/185
Metallized Polyester Radial Lead Capacitors
Radial Box Metallized Polyester Capacitors for Automatic Insertion
The Type 168/185 series radial lead metallized polyes-
ter box capacitors are available in bulk (Type 168) or
on ammo pack or tape and reel (Type 185). These ca-
pacitors are constructed in rugged rectangular plastic
cases and all come with 5.0 mm (0.197
“
) lead spacing.
They are good for general purpose applications such
as bypass, decoupling, energy storage/discharge and
arc suppression.
Highlights
•
•
•
•
•
•
•
Case and epoxy fill meets UL94V-0
5.0 mm (0.197
“
) lead spacing
Bulk, tape and reel or ammo pack
Non-inductively wound
Non-polar
Low leakage
Lead material: Tinned copper wire
Capacitance Range:
Voltage Range:
Capacitance Tolerance:
Operating Temperature Range:
Dielectric Withstand Voltage:
Dissipation Factor (DF):
0.001 µF to 1.0 µF
50 Vdc to 400 Vdc
±5%, ±10%, ±20%
–55 ºC to +125 ºC (with 50% Vdc derating >85 ºC)
1.6 x rated voltage for 2 sec @ +25 ºC ±5 ºC
tanδ x 10
–4
at 25 ºC ±5 ºC
kHz
1
10
100
C
≤0.1
µF
≤100
≤150
≤300
C > 0.1 µF
≤100
≤150
Specifications
RoHS Compliant
Total Self Inductance (L):
Approximately 7 nH
Long Term Stability (after two years):
Capacitance change ∆C/C ≤ ±3% under standard
environmental conditions
Maximum Pulse Rise Time (dv/dt):
Vn
Capacitance
V/µs
50
63
100
C > .0068 µF
.0033 µF < C < .0068 µF
C ≤ .0033 µF
250
400
4
8
10
15
30
44
100
If the working voltage (V) is less than the nominal voltage (Vn),
the capacitor can work at higher dv/dt. In this case, the maximum
value allowed is obtained by multiplying the above value with
the ratio Vn/V.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 168/185
Metallized Polyester Radial Lead Capacitors
Capacitor Outline Drawing
L
T
H
Max
Max
.
217 ±.039
(5.5 ±1.0 mm)
Test Method and Performance
Insulation Resistance
Max
S
±.015
(±0.4 mm)
Ød ±.003
(±0.076)
Lead length shown is as supplied on the 168 Series
Test Conditions
Soldering Temperature:
Soldering Duration:
Performance
Capacitance Change
∆C/C:
DF Change
∆tgδ:
Insulation Resistance:
Soldering
260 ºC ±5 ºC
10 sec ±1 sec
≤
±2%
≤30 x 10
–4
at 10 kHz
≥ limit value
Temperature:
25 ºC ±5 ºC
Voltage Charge Time:
1 minute
Voltage Charge:
10 Vdc for Vn < 100 Vdc
100 Vdc for Vn
≥
100 Vdc
Performance
For Vn > 100 Vdc:
C ≤ 0.33 µF, ≥15,000 MΩ
C > 0.33 µF, ≥ 5,000 S
For Vn
≤100
Vdc:
C ≤ 0.33 µF, 30,000 MΩ
C > 0.33 µF, ≥ 10,000 S
Damp Heat Test
Test Conditions
Temperature:
+40 ºC
Relative Humidity:
95%
Test Duration:
21 days
Performance
Capacitance Change
∆C/C:
±5%
DF Change
∆tgδ: ≤ 0.005 (10 KHz)
Insulation Resistance:
≥ 50% of limit value
Life Test
Test Conditions
REF
Temperature:
+85 ºC
Test Duration:
2000 hrs
Voltage Applied:
1.25 x Vn
Performance
Capacitance Change
∆C/C: ≤
±2%
DF Change
∆tgδ: ≤30 x 10
–4
at 10 kHz
Insulation Resistance:
≥ 50% of limit value
Test Conditions
Ratings
Catalog
Part Number
168104*50A-F
168154*50A-F
168224*50C-F
168334*50C-F
168474*50H-F
168684*50F-F
168824*50G-F
168105*50G-F
168473*63A-F
168563*63A-F
168683*63A-F
168823*63A-F
168104*63A-F
168154*63C-F
168184*63C-F
168224*63C-F
168274*63C-F
168334*63H-F
168474*63H-F
168684*63F-F
168105*63G-F
Tape & Reel
Ammo Pack
185104*50#A>-F
185154*50#A>-F
185224*50#C>-F
185334*50#C>-F
185474*50#H>-F
185684*50#F>-F
185824*50#G>-F
185105*50#G>-F
185473*63#A>-F
185563*63#A>-F
185683*63#A>-F
185823*63#A>-F
185104*63#A>-F
185154*63#C>-F
185184*63#C>-F
185224*63#C>-F
185274*63#C>-F
185334*63#H>-F
185474*63#H>-F
185684*63#F>-F
185105*63#G>-F
Cap
(µF)
0.10
0.15
0.22
0.33
0.47
0.68
0.82
1.00
0.047
0.056
0.068
0.082
0.10
0.15
0.18
0.22
0.27
0.33
0.47
0.68
1.00
L
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
T
50 Vdc
0.098
0.098
0.138
0.138
0.138
0.236
0.236
0.236
0.098
0.098
0.098
0.098
0.098
0.138
0.138
0.138
0.098
0.138
0.138
0.177
0.236
0.256
0.256
0.295
0.295
0.295
0.433
0.433
0.433
0.256
0.256
0.256
0.256
0.256
0.295
0.295
0.295
0.256
0.295
0.295
0.374
0.433
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.020
0.020
0.020
0.020
0.020
0.024
0.024
0.024
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.024
0.024
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
2.5
2.5
3.5
3.5
3.5
Inches
H
S
Ød
L
T
RoHS Compliant
Millimeters
H
6.5
6.5
7.5
7.5
7.5
S
5.0
5.0
5.0
5.0
5.0
Ød
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
6.0 11.0 5.0
6.0 11.0 5.0
6.0 11.0 5.0
2.5
2.5
2.5
2.5
2.5
3.5
3.5
3.5
2.5
3.5
3.5
4.5
6.5
6.5
6.5
6.5
6.5
7.5
7.5
7.5
6.5
7.5
7.5
9.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
63 Vdc
6.0 11.0 5.0
* Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20%
# Indicates packaging type: R = Tape and Reel, A = Ammo Pack
> Indicates tooling code: A = 16.5 mm, B = 18.5 mm (See H dimension in taping specifications)
CDE Cornell Dubilier
•
1605 E. Rodney French Blvd.
•
New Bedford, MA 02744
•
Phone: (508)996-8561
•
Fax: (508)996-3830
•
www.cde.com
Type 168/185
Metallized Polyester Radial Lead Capacitors
Catalog
Part Number
168102*100A-F
168152*100A-F
168222*100A-F
168272*100A-F
168332*100A-F
168392*100A-F
168472*100A-F
168562*100A-F
168682*100A-F
168822*100A-F
168103*100A-F
168153*100A-F
168183*100A-F
168223*100A-F
168273*100A-F
168333*100C-F
168393*100C-F
168473*100C-F
168683*100H-F
168104*100H-F
168154*100F-F
168224*100G-F
168332*250A-F
168472*250A-F
168682*250A-F
168103*250A-F
168153*250A-F
168223*250C-F
168333*250C-F
168473*250F-F
168683*250F-F
168104*250G-F
168102*400A-F
168152*400A-F
168222*400A-F
168332*400C-F
168472*400C-F
168682*400C-F
168103*400F-F
168153*400F-F
168223*400G-F
Tape & Reel
Ammo Pack
185102*100#A>-F
185152*100#A>-F
185222*100#A>-F
185272*100#A>-F
185332*100#A>-F
185392*100#A>-F
185472*100#A>-F
185562*100#A>-F
185682*100#A>-F
185822*100#A>-F
185103*100#A>-F
185153*100#A>-F
185183*100#A>-F
185223*100#A>-F
185273*100#A>-F
185333*100#C>-F
185393*100#C>-F
185473*100#C>-F
185683*100#H>-F
185104*100#H>-F
185154*100#F>-F
185224*100#G>-F
185332*250#A>-F
185472*250#A>-F
185682*250#A>-F
185103*250#A>-F
185153*250#A>-F
185223*250#C>-F
185333*250#C>-F
185473*250#F>-F
185683*250#F>-F
185104*250#G>-F
185102*400#A>-F
185152*400#A>-F
185222*400#A>-F
185332*400#C>-F
185472*400#C>-F
185682*400#C>-F
185103*400#F>-F
185153*400#F>-F
185223*400#G>-F
Cap
(µF)
0.0010
0.0015
0.0022
0.0027
0.0033
0.0039
0.0047
0.0056
0.0068
0.0082
0.010
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.068
0.10
0.15
0.22
0.0033
0.0047
0.0068
0.010
0.015
0.022
0.033
0.047
0.068
0.100
0.001
0.0015
0.0022
0.0033
0.0047
0.0068
0.010
0.015
0.022
L
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
T
0.098
0.098
0.098
0.098
0.098
0.098
0.098
0.098
0.098
0.098
0.098
0.098
0.098
0.098
0.098
0.098
0.098
0.098
0.098
0.098
0.177
0.197
0.098
0.098
0.098
0.098
0.098
0.138
0.138
0.177
0.177
0.197
0.098
0.098
0.098
0.098
0.098
0.138
0.138
0.177
0.197
100 Vdc
0.256
0.256
0.256
0.256
0.256
0.256
0.256
0.256
0.256
0.256
0.256
0.256
0.256
0.256
0.256
0.256
0.256
0.256
0.256
0.256
0.374
0.394
0.256
0.256
0.256
0.256
0.256
0.295
0.295
0.374
0.374
0.394
0.256
0.256
0.256
0.256
0.256
0.295
0.295
0.374
0.394
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.024
0.024
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.024
0.024
0.024
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.024
0.024
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
4.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
9.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
Inches
H
S
Ød
L
Millimeters
T
H
S
Ød
5.0 10.0 5.0
2.5
2.5
2.5
2.5
2.5
3.5
3.5
4.5
4.5
5.0
2.5
2.5
2.5
2.5
2.5
3.5
3.5
4.5
5.0
6.5
6.5
6.5
6.5
6.5
7.5
7.5
9.5
9.5
10
6.5
6.5
6.5
6.5
6.5
7.5
7.5
9.5
10
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
250 Vdc
400 Vdc
* Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20%
# Indicates packaging type: R = Tape and Reel, A = Ammo Pack
> Indicates tooling code: A = 16.5 mm, B = 18.5 mm (See H dimension in taping specification)
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 168/185
Metallized Polyester Radial Lead Capacitors
Tape Specification - 5.0 mm Lead Spacing
Standard EIA-468-B
Item
Lead-to-Lead Distance
Feed Hole Pitch
Pitch of Component
Hole Center to Lead
Feed Hole Center to
Component Center
Component Alignment, F-R
Tape Width
Hold-down Tape Width
Hole Position
Hold-down Tape Position
Height of Component
from Tape Center
Feed Hole Diameter
Code Millimeters
P
P
0
P
1
P
2
P
3
5.0
+0.6 –0.2
12.7
±0.3
12.7
±1.0
2.54
±0.7
6.35
±1.3
±2.0
+1.0 –0.1
Inches
.197
+.024 –.040
.5
±.012
.5
±.039
.100
±.028
.250
±.051
0
±.079
+.039 –.004
Case
Thickness Quantity
Quantity
T
Reeled Ammo Pack
2.5
3.5
4.5
5
6
2500
1800
1400
1200
1000
2000
1500
1300
1000
800
∆h
0
W
18
.709
W
0
6.0 min
W
1
9.0
+0.75 –0.05
W
2
3.0 Max
H
D
0
>
4.0
±0.3
.236 min
.355
+.030 –.001
.118 Max
>
.157
±.012
> The H dimension depends on the
insertion equipment used. Specify
the proper tooling code as indicated
below.
Tooling
Code
A
B
16.5
±0.75
18.5
±0.75
H Dimensions
Millimeters
Inches
.679
±0.030
.728
±0.030
Part Numbering System for Auto Insertion
168/185
104
K
100
R
Packaging
Type
Series
185
Capacitance
102 = .001 µF
103 = .01 µF
104 = .1 µF
105 = 1.0 µF
Tolerance
J = ±5%
K = ±10%
M = ±20%
Voltage
50 = 50 Vdc
63 = 63 Vdc
100 = 100 Vdc
250 = 250 Vdc
400 = 400 Vdc
(#)
A = Ammo
R = Tape & Reel
Internal
Code
Letter
H
B
*Tooling
Code
(>)
A
B
–F
RoHS
Compliant
Designation
* Tooling code (>) depends on the users insertion equipment requirements. See table for available options.
CDE Cornell Dubilier
•
1605 E. Rodney French Blvd.
•
New Bedford, MA 02744
•
Phone: (508)996-8561
•
Fax: (508)996-3830
•
www.cde.com
Type 168/185
Metallized Polyester Radial Lead Capacitors
Notice and Disclaimer:
All product drawings, descriptions, specifications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, confirming and verifying the extent to which the Information con-
tained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guaran-
tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-
tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specific customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indi-
cated in such warnings, cautions and notes, or that other safety measures may not be required.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
