The IO pins P2.0, P2.2 and P2.6 of MSP430 are set as inputs, but they receive the output signal of the Hall sensor. After the program is run, the motor is rotated manually (the Hall element of the mot...
divider = (Uint32)((float)(pUARTCfg->DSP_Core_Speed_Hz)/ (float)(pUARTCfg->baudRate * 6 * osmFactor)+0.5f); Why is baudRate * 6 * osmFactor multiplied by 6? The chip manual does not mention multiplica...
There is a sentence in the MSP430F4XX User's Guide:When using the WDT in the watchdog mode, the WDTIFG flag sources a resetvector interrupt. The WDTIFG can be used by the reset interrupt serviceroutin...