IMPORTANT INFORMATION/DISCLAIMER
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet or
made available on the website are subject to change. The customer is responsible for checking and verifying
the extent to which the Information contained in this publication is applicable to an order at the time the order is
placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee,
warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on AVX’s knowledge of typical operating conditions
for such applications, but are not intended to constitute and AVX specifically disclaims any warranty concerning
suitability for a specific customer application or use.
ANY USE OF PRODUCT OUTSIDE OF SPECIFICATIONS OR ANY STORAGE OR INSTALLATION
INCONSISTENT WITH PRODUCT GUIDANCE VOIDS ANY WARRANTY.
The Information is intended for use only by customers who have the requisite experience and capability to
determine the correct products for their application. Any technical advice inferred from this Information or
otherwise provided by AVX with reference to the use of AVX’s products is given without regard, and AVX assumes
no obligation or liability for the advice given or results obtained.
Although AVX designs and manufactures its products to the most stringent quality and safety standards, given
the current state of the art, isolated component failures may still occur. Accordingly, customer applications
which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as
installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage.
Unless specifically agreed to in writing, AVX has not tested or certified its products, services or
deliverables for use in high risk applications including medical life support, medical device, direct physical
patient contact, water treatment, nuclear facilities, weapon systems, mass and air transportation control,
flammable environments, or any other potentially life critical uses. Customer understands and agrees
that AVX makes no assurances that the products, services or deliverables are suitable for any high-risk
uses. Under no circumstances does AVX warrant or guarantee suitability for any customer design or
manufacturing process.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume
that all safety measures are indicted or that other measures may not be required.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
111919
Surface Mount Ceramic Capacitor Products
Table of Contents
How to Order
Part Number Explanation
.............................................................................. 1
Automotive MLCC
General Specifications
..................................................................................
3
Specifications and Test Methods
.................................................................
4
Capacitance Range
.......................................................................................
5
C0G (NP0) Dielectric
General Specifications
................................................................................
53
Capacitance Range
.....................................................................................
55
APS for COTS+ High Reliability Applications
General Specifications
................................................................................
58
Capacitance Range
.....................................................................................
59
RF/Microwave C0G (NP0) Capacitors (RoHS)
General Information
.................................................................................
7
Capacitance Range
..................................................................................
8
RF/Microwave C0G (NP0) Capacitors (Sn/Pb)
General Information
...............................................................................
10
Capacitance Range
................................................................................
11
RF/Microwave Automotive C0G (NP0) Capacitors (RoHS)
AEC Q200 Qualified Ultra Low ESR
.........................................................
12
Designer Kits
..............................................................................................
14
U Dielectric
MLCC with FLEXITERM
®
General Specifications
................................................................................
62
Specifications and Test Methods
...............................................................
63
Capacitance Range
.....................................................................................
65
FLEXISAFE MLC Chips
Capacitor Array
General Specifications and Capacitance Range
.........................................
67
X8R/X8L Dielectric
General Specifications
................................................................................
15
Specifications and Test Methods
...............................................................
17
Capacitor Array (IPC)
..................................................................................
68
Automotive Capacitor Array (IPC)
...............................................................
72
Part & Pad Layout Dimensions
...................................................................
73
Low Inductance Capacitors
X7R Dielectric
General Specifications
................................................................................
18
Specifications and Test Methods
...............................................................
19
Capacitance Range
.....................................................................................
20
Introduction
................................................................................................
74
LICC (Low Inductance Chip Capacitors)
....................................................
76
IDC (InterDigitated Capacitors)
...................................................................
80
LGA Low Inductance Capacitors
.................................................................
84
X7S Dielectric
High Temperature MLCCs
High Voltage MLC Chips
General Specifications
................................................................................
22
Specifications and Test Methods
...............................................................
23
Capacitance Range
.....................................................................................
24
AT Series – 200ºC & 250°C Rated
..............................................................
87
X5R Dielectric
General Specifications
................................................................................
25
Specifications and Test Methods
...............................................................
26
Capacitance Range
.....................................................................................
27
For 600V to 5000V Applications
.................................................................
93
Tin/Lead Termination “B” - 600V to 5000V Applications
............................
98
FLEXITERM
®
- 600V to 5000V Applications
..............................................
100
For 600V to 3000V Automotive Applications - AEC-Q200
.........................
105
MIL-PRF-55681/Chips
Y5V Dielectric
General Specifications
................................................................................
29
Specifications and Test Methods
...............................................................
30
Capacitance Range
.....................................................................................
31
CDR01 thru CDR06
....................................................................................
107
CDR31 thru CDR35
....................................................................................
109
MLCC Medical Applications
MM Series
................................................................................................
113
MLCC Gold Termination — AU Series
General Specifications
................................................................................
32
Capacitance Range
.....................................................................................
33
Packaging of Chip Components
....................................................
118
Embossed Carrier Configuration
...................................................
119
Paper Carrier Configuration
...........................................................
120
Basic Capacitor Formulas
................................................................
121
General Description
...........................................................................
122
Surface Mounting Guide
..................................................................
127
MLCC Tin/Lead Termination "B" (LD Series)
C0G (NP0) – General Specifications
...........................................................
39
Specifications and Test Methods
...........................................
40
Capacitance Range
................................................................
41
General Specifications
...........................................................
43
X8R
Specifications and Test Methods
...........................................
44
Capacitance Range
................................................................
45
General Specifications
...........................................................
46
X7R
Specifications and Test Methods
...........................................
47
Capacitance Range
................................................................
48
General Specifications
...........................................................
50
X5R
Specifications and Test Methods
...........................................
51
Capacitance Range
................................................................
52
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
How to Order
Part Number Explanation
Capacitor Array
EXAMPLE: W2A43C103MAT2A
W
2
A
4
3
C
Dielectric
A = NP0
C = X7R
D = X5R
103
Capacitance
Code (In pF)
2 Sig Digits
+ Number of
Zeros
M
A
T
2A
Style
Case
Array Number Voltage
W = RoHS
Size
of Caps
Z = 10V
L = SnPb 1 = 0405
Y = 16V
2 = 0508
3 = 25V
3 = 0612
5 = 50V
1 = 100V
Packaging &
Capacitance
Failure
Termination
Quantity
Tolerance
Rate
Code
Code
J = ±5%
A = Commercial T = Plated Ni and Sn
2A = 7" Reel
K = ±10%
4 = Automotive Z = FLEXITERM
®
*B
= 5% min lead
(4000)
M = ±20%
*X
= FLEXITERM
®
4A = 13" Reel
with 5% min lead
(10000)
2F = 7" Reel
(1000)
NOTE: Contact factory for availability of Termination and Tolerance Options for Specific Part Numbers.
Low Inductance Capacitors (LICC)
EXAMPLE: 0612ZD105MAT2A
0612
Size
0306
0508
0612
*LD16
*LD17
*LD18
Z
Voltage
6 = 6.3V
Z = 10V
Y = 16V
3 = 25V
5 = 50V
D
Dielectric
C = X7R
D = X5R
105
Capacitance
Code (In pF)
2 Sig. Digits +
Number of Zeros
M
Capacitance
Tolerance
K = ±10%
M = ±20%
A
Failure Rate
A = N/A
T
Terminations
T = Plated Ni
and Sn
*B
=5% min
lead
2
Packaging
Available
2 = 7" Reel
4 = 13" Reel
A
Thickness
See Page 97
for Codes
NOTE: Contact factory for availability of Termination and Tolerance Options for Specific Part Numbers.
Interdigitated Capacitors (IDC)
EXAMPLE: W3L16D225MAT3A
W
3
L
1
6
Voltage
4 = 4V
6 = 6.3V
Z = 10V
Y = 16V
D
225
M
A
T
3
A
Style
Case
Low
Number
W = RoHS
Size Inductance
of
L = SnPb 2 = 0508 ESL = 50pH
Terminals
3 = 0612 ESL = 60pH 1 = 8 Terminals
Dielectric Capacitance Capacitance Failure Termination Packaging Thickness
C = X7R
Rate
T = Plated Ni Available Max. Thickness
Code (In pF) Tolerance
D = X5R
M = ±20
A = N/A
and Sn
2 Sig. Digits +
1=7" Reel
mm (in.)
*B
=5% min
Number of
3=13" Reel A=0.95 (0.037)
lead
Zeros
S=0.55 (0.022)
NOTE: Contact factory for availability of Termination and Tolerance Options for Specific Part Numbers.
Low Inductance Decoupling Capacitor Arrays (LICA)
EXAMPLE: LICA3T183M3FC4AA
LICA
3
T
102
M
3
F
Termination
*F
= C4 Solder
Balls- 97Pb/3Sn
H = C4 Solder
Balls–Low ESR
P = Cr-Cu-Au
N = Cr-Ni-Au
X = None
C
4
A
A
Style Voltage Dielectric
&
5V = 9 D = X5R
Size
10V = Z T = T55T
25V = 3 S = High K
T55T
*
Cap/Section Capacitance Height
Code
(EIA Code) Tolerance
102 = 1000 pF M = ±20% 6 = 0.500mm
P = GMV 3 = 0.650mm
103 = 10 nF
1 = 0.875mm
104 = 100 nF
5 = 1.100mm
7 = 1.600mm
# of
Inspection
Code
Reel Packaging
Caps/Part
Code
Face
M = 7" Reel
1 = one A = Standard A = Bar
R = 13" Reel
6 = 2"x2" Waffle Pack 2 = two B = Established B = No Bar
Reliability C = Dot, S55S
8 = 2"x2" Black Waffle 4 = four
Testing
Dielectrics
Pack
D = Triangle
7 = 2"x2" Waffle Pack
w/ termination
facing up
A = 2"x2" Black Waffle
Pack
NOTE: Contact factory for
w/ termination
availability of Termination and
facing up
Tolerance Options for Specific
C = 4"x4" Waffle Pack
Part Numbers.
w/ clear lid
2
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
京公网安备 11010802033920号
EEWORLD
