302074-4Z205K00DB datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> 302074-4Z205K00DB

302074-4Z205K00DB: DescriptionFixed Resistor, Metal Foil, 1W, 205000ohm, 500V, 0.5% +/-Tol, -.2,.2ppm/Cel,; CategoryPassive components The resistor; File Size456KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com

Download Datasheet Parametric View All

302074-4Z205K00DB Overview

Fixed Resistor, Metal Foil, 1W, 205000ohm, 500V, 0.5% +/-Tol, -.2,.2ppm/Cel,

302074-4Z205K00DB Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Objectid	852928158
Reach Compliance Code	compliant
Country Of Origin	Israel
ECCN code	EAR99
YTEOL	10
structure	Hermetically Sealed
JESD-609 code	e0
Lead diameter	0.645 mm
Lead length	25.4 mm
Number of terminals	4
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package diameter	12.7 mm
Package length	25.4 mm
Package form	4 Terminals
method of packing	Bulk
Rated power dissipation(P)	1 W
resistance	205000 Ω
Resistor type	FIXED RESISTOR
series	HZ(OTHER)
technology	METAL FOIL
Temperature Coefficient	0.2 ppm/°C
Terminal surface	Tin/Lead (Sn/Pb)
Tolerance	0.5%
Operating Voltage	500 V

Preview

Download Datasheet

View All

HZ Series (Z-Foil) with Zero TCR

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed Construction Ultra High

Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 %

and Load Life Stability of ± 0.002 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES



Temperature coefficient of resistance (TCR):

± 0.2 ppm/°C typical (- 55 °C to + 125 °C,

+ 25 °C ref.). For ultra high performances

(instrumentation and metrology) please refer to

the last page



Resistance range: 5



to 1.1 M (higher or lower values of

resistance available)



Foil resistors are not restricted to standard values; specific

“as required” values can be supplied at no extra cost or

delivery (e.g. 1K2345 vs. 1K)



Power coefficient “R due to self heating”:

5 ppm at rated power with the Z-Foil technology



Tolerance:

to ± 0.001 % (10 ppm)



Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power



Load life stability, can be considerably improved

through in-house stabilization



Shelf life stability: 2 ppm for at least 6 years

(unaffected by humidity)



Electrostatic discharge (ESD) up to 25 000 V



Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)



Non-inductive, non-capacitive design



Non hot spot design



Rise time: 1 ns effectively no ringing



Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)



Thermal EMF: 0.05 µV/°C typical



Voltage coefficient: < 0.1 ppm/V



Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)



Non-inductive: < 0.08 µH



Terminal finish available: lead (Pb)-free or tin/lead alloy



Impervious to harmful environments - oil filled



Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com



For better performances (values, TCR, tolerance, stability),

please contact us

INTRODUCTION

The Z-Foil based oil filled, hermetically sealed HZ Series

resistors represent an industry breakthrough. The hermetic

sealing eliminates the ingress of moisture and oxygen, while

the oil acts as a thermal conductor, thus eliminating

long-term degradation elements of unsealed resistors, while

at the same time allowing the device to accept short periods

of overload without degradation.

The Z-Foil technology provides a significant reduction of the

resistive components, sensitivity to ambient temperature

variations (TCR) and applied power changes (PCR). When

combined with the hermetic sealing and oil filling, the

HZ Series resistors become

the most precise and stable

resistors available.

They are used as the most precise

secondary standards for ultra precision metrology.

With accuracies of ± 0.001 % (10 ppm) and a resistance

range from 5



to 1.1 M and long term shelf life of less than

2 ppm, these devices are virtually secondary standards that

can be carried in sets for daily or periodic calibration of

factory measurement equipment.

The HZ Series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE VALUE

()

TYPICAL TCR AND

MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 0.2 ± 2

± 0.2 ± 3

± 0.2 ± 4

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

100 to < 1M1

50 to < 100

5 to < 50

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

Resistance Change (ppm)

Time (Days)

Document Number: 63120

Revision: 25-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com

Recommended Resources

Circuit diagram of two wireless microphones made by 3DG12

Using AC capacitor step-down circuit

Inclination sensor thermal wire circuit diagram c

With wide adjustment range and constant current source

Football game score display circuit

Wien bridge oscillator and application circuit

Filtering: How to better filter out glitches in voltage signals? Is there any other method besides RC first-order filtering?...; yjy1996 Analog electronics

Ask a question about compilation. How to compile a MAP file under VxWorks?: In PSOS, after compilation, a MAP file will be generated as a memory mapping table, through which the value of a variable in the running program can be viewed. Can such a file be compiled in VxWorks? ...; ocon Real-time operating system RTOS

Some special uses of AD6: 1. Globally modify the character size. Generally speaking, the component number and key parameters are marked near the components of the formal PCB,but some pure SMD circuit boards are relatively smal...; 破茧佼龙 MCU

XILINX ISE 14.6 Failed to create temporary project! !: Open ISE, and a dialog box "Project Open Failed" will pop up first. Close it and then click New Project, and then "Failed to create temporary project" will appear, and another dialog box will pop up a...; daiwenzhou FPGA/CPLD

Chinese caller ID device based on DTMF format!: [i=s]This post was last edited by paulhyde on 2014-9-15 03:39[/i] [b][color=#000099][/color][/b] [url=http://bbs.cepark.com/attachment.php?aid=MjgzMnwwNzgwODIzOXwxMjY3MzYwMDEzfGFiNzZYdmI4MXN2UzZVcXJaY...; gina Electronics Design Contest

High-speed AD data acquisition, asynchronous FIFO, or dual-port RAM: RT acts as an oscilloscope, FPGA collects data and sends it to STM32 for display. Experienced friends please give me some advice....; 523335234 FPGA/CPLD

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components