PRA100C4-61K2DBG

1. Principle 1. Infrared emission protocol The infrared transmission protocol has been written in the previous article , so I will not repeat it here. 2. Timer counting and input capture A timer...[Details]

As many companies listed with the concept of touch screen begin to "transform and upgrade", the official voice of the TP industry is getting smaller and smaller. At the same time, the list o...[Details]

*This article is based on the author's report at the "Embedded System Association Theme Discussion (Total 22nd) - Current Situation and Development Prospects of Internet of Things Operating Systems...[Details]

In January, Android 7.0 Marshmallow surpassed Lollipop three years ago to become the second most used Android version in the world. According to the latest data from Google , a snapshot of d...[Details]

On May 16, in response to the public opinion storm caused by Lenovo's " 5G voting" incident, Lenovo Holdings Chairman and Lenovo Group Founder Liu Chuanzhi, Lenovo Gr...[Details]

STM32 has two watchdogs: independent watchdog and window watchdog. This article mainly introduces the use of independent watchdog. Independent watchdog (IDWG): driven by an independent 40KHZ low-sp...[Details]

Ouster LiDAR OS-1 (left) and OS-2 (center) Velodyne invented the modern 3D LiDAR scanner in the mid-2000s, but in recent years conventional wisdom has held that Velodyne’s design — 64 lasers mounted...[Details]

Table of contents: 1 Overview 2: Common interrupt functions 3: PWM output  1 Overview In development, timers are widely used, which can be simply summarized into three aspects: 1.1: Application of ...[Details]

For complex calculations, the speed of the microcontroller is too slow. The best way is to manually calculate all the results in advance, store them in ROM in sequence, and then directly check the re...[Details]

Design a program for the 51 single-chip microcomputer. It is known that the crystal oscillator frequency of the 89C51 single-chip microcomputer is 12MHz, and it is required to use T1 timing to output...[Details]

;Question requirements: ;Stopwatch timing, press S0 to start timing, and the digital tube will display; ;Press S0 again to stop. If S0 is not pressed to stop after counting for 1 minute, the buzzer w...[Details]

//******************************************************************************/ #include msp430.h //Note: There must be a delay between two transmissions, otherwise it cannot be sent again, seria...[Details]

#include avr/io.h          #include util/delay.h #include avr/interrupt.h //Interrupt function header file //Function declaration void Port_Init(void); //Port initialization configuration void Comp...[Details]

Recently, in the display industry, quantum dot display technology has become popular, and major manufacturers have flocked to it and started to produce quantum dot displays. However...[Details]

#ifndef _I2C_H  #define _I2C_H  #define SDA_1       P4OUT|=0x02               //SDA = 1  #define SDA_0 P4OUT&=~0x02 //SDA = 0  #define SCL_1 P4OUT|=0x01 //SCL = 1  #define SCL_0 P4OUT&=~0x01 //SCL = ...[Details]