VHP202TP56R900VB datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> VHP202TP56R900VB

VHP202TP56R900VB: DescriptionFixed Resistor, Metal Foil, 0.3W, 56.9ohm, 300V, 0.005% +/-Tol, -2,2ppm/Cel, 4216,; CategoryPassive components The resistor; File Size451KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com; Environmental Compliance

Download Datasheet Parametric View All

VHP202TP56R900VB Overview

Fixed Resistor, Metal Foil, 0.3W, 56.9ohm, 300V, 0.005% +/-Tol, -2,2ppm/Cel, 4216,

VHP202TP56R900VB Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	851298237
Reach Compliance Code	compliant
Country Of Origin	Israel
YTEOL	10
structure	Hermetically Sealed
Lead diameter	0.64 mm
Lead length	25.4 mm
lead spacing	3.81 mm
Number of terminals	2
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package height	10.92 mm
Package length	10.54 mm
Package form	Radial
Package width	4.11 mm
method of packing	Bulk
Rated power dissipation(P)	0.3 W
resistance	56.9 Ω
Resistor type	FIXED RESISTOR
series	H(OTHER)
size code	4216
technology	METAL FOIL
Temperature Coefficient	2 ppm/°C
Tolerance	0.005%
Operating Voltage	300 V

Preview

Download Datasheet

View All

H Series

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed High Precision Bulk

Metal

Foil Technology Resistors with TCR of ± 2 ppm/°C, Tolerance of ± 0.001 % and

Load Life Stability of ± 0.005 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES

•

Temperature coefficient of resistance (TCR):

± 2 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C

ref.).

For

ultra

high

performances

(instrumentation and metrology) please refer to

the last page

•

Resistance range: 5

to 1.84 MΩ (higher or

lower values of resistance available)

•

Vishay Foil resistors are not restricted to standard values;

specific “as required” values can be supplied at no extra

cost or delivery (e.g. 1K2345 vs. 1K)

•

Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)

•

Tolerance: to ± 0.001 % (10 ppm)

•

Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power

•

Load life stability can be considerably improved

through in-house stabilization

•

Shelf life stability: ± 2 ppm for at least 6 years

(unaffected by humidity)

•

Electrostatic discharge (ESD) up to 25 000 V

•

Rise time: 1 ns effectively no ringing

•

Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)

•

Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)

•

Thermal EMF: 0.05 µV/°C typical

•

Voltage coefficient: < 0.1 ppm/V

•

Non-inductive: < 0.08 µH

•

Non-inductive, non-capacitive design

•

Non hot spot design

•

Terminal finish available: lead (Pb)-free or tin/lead alloy

•

Impervious to harmful environments - oil-filled

•

Compliant to RoHS directive 2002/95/EC

•

Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com

•

For better performances (values, TCR, tolerance, stability),

please see the HZ series

INTRODUCTION

The H series resistors are oil-filled, hermetically sealed ultra

precision resistors and are used as secondary standards for

metrology applications.

The hermetic sealing eliminates the ingress of moisture and

oxygen, while the oil acts as a thermal conductor, thus

eliminating the long-term degradation elements of unsealed

resistors, while at the same time allowing the device to

accept short periods of overload without degradation.

Vishay’s Bulk Metal

Foil outperforms all other resistor

technologies available today for applications that require

precision and stability. When combined with the hermetic

sealing and oil filling, the H series resistors become

the most

precise and stable resistors available.

With accuracies of 0.001 %, a resistance range from 5

to 1.84 MΩ, and long term shelf life of less than 2 ppm,

these devices are virtually secondary standards that can be

carried in sets for daily or periodic calibration of factory

measurement equipment.

The H series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE

VALUE (Ω)

100 to < 1M84

50 to < 100

5 to < 50

TYPICAL TCR AND MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 2 ± 2.5

± 2 ± 3.5

± 2 ± 4.5

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

* Pb containing terminations are not RoHS compliant, exemptions may apply

Resistance Change (ppm)

Time (Days)

Document Number: 63006

Revision: 23-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com

Recommended Resources

Circuit schematic diagram of Y-△ starting three-phase induction motor

Application circuit based on PFC controller L6564

Gantry milling machine Gantry milling machine variable speed mid-range control

Field effect tube high frequency oscillator

small hearing aid

Liquid level pressure detection circuit

This is a pitfall - compiler optimization: I'm working on CC2530 recently, programming on IAR compiler. A few days ago, I encountered a funny problem, the software delay has no effect. Hmm, funny, I've been programming for so many years, can't...; 汤权 MCU

C language BCD code to decimal (hexadecimal HEX) program: [i=s]This post was last edited by tiankai001 on 2018-12-3 12:21[/i] [b][color=#5E7384]This content is originally created by EEWORLD forum user [size=3]tiankai001[/size]. If you need to reprint or use ...; tiankai001 Programming Basics

Dynamic power management technology based on prior knowledge: Abstract: "Dynamic power management" is a design method to reduce power consumption by dynamically allocating system resources to complete system tasks with the least components or the lowest workload...; zbz0529 Power technology

Can vxwork use a PC as the target machine with CPUInter Core Duo?: Which BSP should I choose when making a Build rom? In my tornado 2.2, there are pentium, pentium1, pentium2, pentium3, pentium4, and pentium_mp. I chose pentium_mp and turned on the **_PC_CONSOLE opti...; XWXWANG Embedded System

I have a puzzling question about zigbee networking.: Yesterday I got two CC2538 SmartRF06EB development kits. I debugged them with GenericApp in the protocol stack Z-Stack-Mesh-1.0.0. One board was burned into a coordinator, PANid was set to 0x6018, cha...; chanson RF/Wirelessly

Introduction to the main application instruments of online detection instruments: Ultrasonic level meter, differential level meter, flow meter (1) Screen operation control. One ultrasonic differential level meter is installed on each coarse screen and fine screen. The difference in...; sovlrio Industrial Control Electronics

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components