All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
NOTE: KYOCERA AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.
42
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
041520
–
high reliability tantalum capacitors
–
TBJ SERIES
CWR11 - MIL-PRF-55365/8 Established Reliability,
COTS-Plus & Space Level
RATING & PART NUMBER REFERENCE
CWR11 P/N
CWR11K^156*@+
CWR11M^104*@+
CWR11M^154*@+
CWR11M^224*@+
CWR11M^334*@+
CWR11M^474*@+
CWR11M^684*@+
CWR11M^105*@+
CWR11M^155*@+
CWR11M^225*@+
CWR11M^335*@+
CWR11M^475*@+
CWR11M^685*@+
CWR11N^104*@+
CWR11N^154*@+
CWR11N^224*@+
CWR11N^334*@+
CWR11N^474*@+
CWR11N^684*@+
CWR11N^105*@+
CWR11N^155*@+
CWR11N^225*@+
CWR11N^335*@+
CWR11N^475*@+
COTS-Plus P/N
TBJ D 156 * 025 C
# @ 0 ^ ++
TBJ A 104 * 035 C
# @ 0 ^ ++
TBJ A 154 * 035 C
# @ 0 ^ ++
TBJ A 224 * 035 C
# @ 0 ^ ++
TBJ A 334 * 035 C
# @ 0 ^ ++
TBJ B 474 * 035 C
# @ 0 ^ ++
TBJ B 684 * 035 C
# @ 0 ^ ++
TBJ B 105 * 035 C
# @ 0 ^ ++
TBJ C 155 * 035 C
# @ 0 ^ ++
TBJ C 225 * 035 C
# @ 0 ^ ++
TBJ C 335 * 035 C
# @ 0 ^ ++
TBJ D 475 * 035 C
# @ 0 ^ ++
TBJ D 685 * 035 C
# @ 0 ^ ++
TBJ A 104 * 050 C
# @ 0 ^ ++
TBJ B 154 * 050 C
# @ 0 ^ ++
TBJ B 224 * 050 C
# @ 0 ^ ++
TBJ B 334 * 050 C
# @ 0 ^ ++
TBJ C 474 * 050 C
# @ 0 ^ ++
TBJ C 684 * 050 C
# @ 0 ^ ++
TBJ C 105 * 050 C
# @ 0 ^ ++
TBJ D 155 * 050 C
# @ 0 ^ ++
TBJ D 225 * 050 C
# @ 0 ^ ++
TBJ D 335 * 050 C
# @ 0 ^ ++
TBJ D 475 * 050 C
# @ 0 ^ ++
Parametric Specifications by Rating per MIL-PRF-55365/8
All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
NOTE: KYOCERA AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
Is there anything special about the 9B90 C3 PB0 port?
Why can the external pull-up only go up to 1.3V in input mode?I hope experts can give me some advice!...
[i=s] 本帖最后由 dontium 于 2015-1-23 13:39 编辑 [/i]IntroductionNewer high-speed ADCs e outfittedwith a large analog-input bandwidth (aboutthree to six times the maximum samplingfrequency) so they can be use...
mSATA (mini-SATA) is a mini version of SATA interface. Its appearance and electronic interface are exactly the same as mini PCI-E, but the electronic signals are different and the two are incompatible...
int main(void){// disable JTAG port DDPCONbits.JTAGEN = 0;
//T2 interrupt initializationSEI(); //Turn on general interruptIFS0bits.T2IF=0;//Clear interrupt flagIPC2bits.T2IP=5;//Set interrupt priority...
In view of the fact that there are some unstable factors in the power circuit, the circuit designed to prevent such unstable factors from affecting the circuit effect is called a protection circuit . ...
Assume that data is read from 8-bit AD (if it is a higher-bit AD, the data type can be defined as int), the subroutine is get_ad();
1. Limited secondary filtering
/* A value can be adjust...[Details]
Floating-point digital signal processing has become a constant requirement for precision technology, often in applications requiring high accuracy in areas such as aviation, industrial machinery, a...[Details]
The Portable Digital Data Acquisition System (PDDAS) uses LabVIEW Real-Time and PXI to control the wind tunnel test and record air pressure data from 128 different channels.
"The LabVIEW Real-...[Details]
1 Introduction
Solar street lights are mainly composed of four parts: solar photovoltaic cell components, batteries, charge and discharge controllers, and lighting fixtures. The bo...[Details]
My colleague and I spent the day chatting in the hotel bar. We had met with several customers. We were both wondering how come these engineers we were meeting knew almost nothing about analog techn...[Details]
The data collector of the automatic weather station is generally designed based on a single-chip microcomputer or a PC/104 bus controller. It has the characteristics of good compatibility with PC, low...[Details]
1 Introduction
Building Automation System (BAS) is a distributed monitoring system (DCS) designed according to distributed information and control theory. It is the result of the mutual de...[Details]
1 Introduction
With the development of control, computer, communication, network technology, etc., a new control technology, namely fieldbus, has emerged in the field of industrial control...[Details]
The automotive lighting and signal control system is responsible for controlling the vehicle's lighting, signal lights, electric horns, reversing and brake buzzers. Traditional automotive lighting...[Details]
In the analysis of electronic circuits, static analysis (also known as DC analysis) is the basis of circuit analysis. However, it is well known that electronic components are nonlinear, so the anal...[Details]
RS-422 and RS-485 are both serial data interface standards, which were developed and published by the Electronic Industries Association (EIA). RS-422 defines a balanced communication interface with a ...[Details]
The typical fault troubleshooting listed below is for reference of maintenance personnel.
When the computer is turned on, the indicator light is off and there is no screen display
Mainte...[Details]
Overview
In spectral measurement, photomultiplier tubes (PMT) and charge-coupled devices (CCD) are often used as photoelectric converters. PMT is used in slow-changing, high-precision spectral...[Details]
Capacitance Measurement
Used to verify that capacitors meet the manufacturer's specifications. For quality control, a group of capacitors may be placed in an environmental chamber and the cap...[Details]
Introduction
Automakers are working to reduce vehicle weight to reduce CO2 emissions and improve fuel efficiency. Designers are therefore seeking new technologies and design techniques that can...[Details]
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
