381LR102M200A022 datasheet, PDF

Datasheet> All Categories > Passive components> 381LR102M200A022

381LR102M200A022: Descriptionaluminum electrolytic capacitors - snap In 1000uf 200v 20%; CategoryPassive components; File Size132KB，5 Pages; ManufacturerAll Sensors; Environmental Compliance

Download Datasheet Parametric View All

381LR102M200A022 Online Shopping

Suppliers	Part Number	Price	MOQ	In stock
	381LR102M200A022	-	-	View	Buy Now

381LR102M200A022 Overview

aluminum electrolytic capacitors - snap In 1000uf 200v 20%

381LR102M200A022 Parametric

Parameter Name	Attribute value
Manufacture	Cornell Dubilie
Product Category	Aluminum Electrolytic Capacitors - Snap I
RoHS	Yes
Capacitance	1000 uF
Voltage Rating DC	200 V
Tolerance	20 %
Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 105 C
Diamete	35 mm
Length	30 mm
Lead Spacing	10 mm
Packaging	Bulk
Produc	Aluminum Electrolytic Capacitors
Factory Pack Quantity	100
Termination Style	Snap I
Unit Weigh	48 g

Preview

Download Datasheet

View All

Type 381LR 105 °C Highest Ripple, Snap-In Aluminum

Ultra-High Ripple Capabilities

Compared to standard 105 °C snap-ins like the Type 381L/LX

Type 381LR can handle an extra 25% ripple current or more.

This remarkable capability stems from advances in electrolyte

that give extremely low ESR values.In high ripple current

applications like motor drives you can save by using fewer

capacitors.

Highlights

- The right choice for motor drive bus capacitors

- The right choice for UPS bus capacitors

- Compare to Type 381L

- Up to 2 times the ripple current

Specifications

Temperature Range

Rated Voltage Range

Capacitance Range

Capacitance Tolerance

Leakage Current

Ripple Current Multipliers

–40 °C to + 105 °C ≤ 315 Vdc

–25 °C to + 105 °C ≥ 350 Vdc

200 Vdc to 450 Vdc

56 µF to 2,200 µF

± 20%

≤3 √CV µA, 4 mA max, 5 minutes

Ambient Temperature

45 ºC

2.35

Frequency

50 Hz 60 Hz 120 Hz 500 kHz 1 kHz kHz &

0.75

Low Temperature Characteristics

Endurance Life Test

0.80

1.00

1.20

1.25

1.40

60 ºC

2.20

70 ºC

2.00

85 ºC

1.70

105 ºC

1.00

Impedance ratio: Z

–20⁰C

∕ Z

+25⁰C

≤ 3 (200–450Vdc)

3000 h at full load at 105 °C

∆ Capacitance ±20%

ESR 200% of limit

DCL 100% of limit

1000 h at 105 °C

∆ Capacitance ±20%

ESR 200% of limit

DCL 100% of limit

10 to 55 Hz, 0.06” and 10 g max, 2 h each plane

RoHS Compliant

Shelf Life Test

Vibration

CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800

Notice and Disclaimer:

All product drawings, descriptions, specifications, statements, information and

data (collectively, the “Information”) in this datasheet or other publication are subject to change. The

customer is responsible for checking, confirming and verifying the extent to which the Information con-

tained in this datasheet or other publication is applicable to an order at the time the order is placed. All

Information given herein is believed to be accurate and reliable, but it is presented without any guaran-

tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability

for certain applications are based on the knowledge that the Cornell Dubilier company providing such

statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards

as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-

tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,

warranty or representation concerning the suitability for a specific customer application, use, storage,

transportation, or operating environment. The Information is intended for use only by customers who

have the requisite experience and capability to determine the correct products for their application. Any

technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference

to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier),

and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although

Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design

and manufacturing of its products, in light of the current state of the art, isolated component failures may

still occur. Accordingly, customer applications which require a high degree of reliability or safety should

employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies

or other appropriate protective measures) in order to ensure that the failure of an electrical component

does not result in a risk of personal injury or property damage. Although all product-related warnings,

cautions and notes must be observed, the customer should not assume that all safety measures are indi-

cated in such warnings, cautions and notes, or that other safety measures may not be required.

Recommended Resources

Can the protective layer technology of lithium batteries really improve the capacity and safety of the battery?

Multifunctional environmentally friendly circuit

Encoded infrared transmitter circuit

5kHz photocell oscillation circuit

Telephone automatic recording controller circuit diagram

STK077 power amplifier circuit

Shanghai is looking for vxworks developers: Shanghai is looking for vxworks developers. Job location: Shanghai communications industry low-level embedded R&D. Requirements: about 2 years of work experience, college degree or above, English read...; lelte Real-time operating system RTOS

[Overseas Cool News] Oscilloscope watch made with ATxmega256A3U MCU: [align=left]Nowadays, wearable devices are in full swing. A maker has made a retro-style "oscilloscope watch" based on Atmel ATxmega256A3U MCU: it has all the daily timing functions: time, calendar, a...; sophor Microchip MCU

I really don't want to work in electronics anymore, it won't be of much use to me in the future: Damn, I really don't want to learn electronics anymore. It won't be very useful to me in the future, or I won't need it at work. But if I don't learn it, what should I do? I don't know, damn electroni...; liuming759 Talking

Is it possible to transmit a sampling rate of 12MByte/s to the tms320c6416T via MCBSP?: The 6416T 1G main frequency, the mcbsp rate can support a rate of 12MByte/s (96Mbps), but I don't know if it will be unstable. [[i] This post was last edited by dsp_comm on 2011-5-15 19:23 [/i]]...; dsp_comm DSP and ARM Processors

MSP430Ware study notes UART SMCLK 115200-8-N-1: [p=26, null, left][color=#000][font=Arial]1. Before initializing UART0, you need to initialize ACLK, SMCLK and MCLK. In the sample code, XT1 is used, ACLK is 32768, SMCLK and MCLK are about 8MHZ. [/fo...; qinkaiabc Microcontroller MCU

As shown in the figure below, please tell me, what is the inductive reactance of L8?: As shown in the figure below, AC220V is stepped down to AC18V by T2, and then to DC25V after bridge rectification. DC25V is filtered by capacitors and inductors. In order to prevent the filter circuit...; yhye2world Power technology

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components