SI104-150

In the actual project development process, hardware circuits often need to be modified, and the modified parts need to modify the driver. Thinking about the coming and going of such requirements is t...[Details]

The program got stuck during LCD initialization. Through hardware debugging, it was found that it was stuck in the Delay_ms() function. Going to the definition, it was found to be a macro definition ...[Details]

The update interrupt initialization configuration of the stm32 advanced timer TIM1 is not much different from that of the ordinary timer. What needs to be paid attention to is the configuration of TI...[Details]

     The day before yesterday, I learned about STM's Systick and found it quite useful for precise timing. When I used CVAVR before, I found that the delay.h in it was very useful. So, I used STM32's...[Details]

The goal of this article is to build a TCP client based on the previous project that can ping the PC, and can actively send data to the PC, and can also send and receive data with the PC, and display...[Details]

In the project, CPLD is needed to complete part of the algorithm design. The parameters are given by AVR, so the communication between AVR and CPLD needs to be completed. Therefore, a test program is...[Details]

    The article is written for LPC2148, but it is also applicable to Samsung's 44B0 chip. You only need to select S3C44B0 as the corresponding CPU when selecting it.     JLINK debugging experience un...[Details]

As a leading company in automotive semiconductors, Freescale and Khronos Group have jointly launched an automotive multimedia embedded microprocessor i.MX35 with an integrated OpenVG hardware acceler...[Details]

It is required to use MCS-51 microcontroller to sort data. 1. Sort the 8 data in ascending order; 2. The data to be sorted is stored in the internal data memory address units 30H-37H, which are 34H, ...[Details]

#include "MSP430x24x.h" void main(void) {         // Stop watchdog timer to prevent time out reset         WDTCTL = WDTPW + WDTHOLD; //Watchdog            P4DIR = BIT0|BIT1|BIT2|BIT3; //Set to outpu...[Details]

/********************************************************************** **                                                        ** File : EEPROM.c | Eeprom write and read |                         ...[Details]

#include   #include    // Alphanumeric LCD Module functions #asm    .equ __lcd_port=0x18 ;PORTB #endasm #include  int shi,ge,qian,bai,m;  int adc_v; // Timer 0 output compare interrupt service routin...[Details]

Mobile phone battery charger program made by STC12C2052AD microcontroller #include  stc12c2052ad.h   #include  intrins.h   #define uchar unsigned char  #define uint unsigned int sbit REF   =P1^0; sbi...[Details]

#ifndef _I2C_H  #define _I2C_H  #define SDA_1       P4OUT|=0x02               //SDA = 1  #define SDA_0 P4OUT&=~0x02 //SDA = 0  #define SCL_1 P4OUT|=0x01 //SCL = 1  #define SCL_0 P4OUT&=~0x01 //SCL = ...[Details]

float ad_value;  float value;  int main( void )  {  WDTCTL=WDTPW+WDTHOLD; //Turn off watchdog  BCSCTL1 =CALBC1_1MHz; //Set DCO to 1MHZ  DCOCTL =CALBC1_1MHZ;  ADC10CTL1=INCH_10; //Select the 10th chan...[Details]