Superior Jitter Performance (comparable to SAW based)
Frequencies from 150 MHz to 1.4 GHz
Designed for a short 2 week cycle time
Applications:
Telecommunications such as SONET / SDH / DWDM /
FEC / SERDES / OC-3 thru OC-192
Wireless base stations / WLAN / Gigabit Ethernet
Avionic flight controls and military communications
MtronPTI
Corporate Headquarters
100 Douglas Avenue
PO Box 630
Yankton, SD 57078-0630
1-800-762-8800
www.mtronpti.com
M210x Series
PECL/LVDS/CML Clock Oscillator – 3.3/2.5/1.8 Volt – 5x7/9x14 mm
Product Specifications
Product Features:
•
•
•
•
•
Superior
Jitter Performance
comparable to SAW-based products (0.30pS typical at 622.08 MHz)
Frequencies
from 150 MHz to 1.4 GHz
Crystal resonator based product offering
far better Stability
than SAW (+/-20ppm)
Designed for
Short Cycle Time
manufacturing (2 weeks or less)
0.01 µF bypass capacitor from Vcc to ground built into
both
5x7 and 9x14 packages
Description:
The M210x Series oscillators are high performance PECL, LVDS, or CML output oscillators featuring exceptional
performance while addressing the demands for shortened manufacturing cycle times.
Applications:
•
•
•
•
Telecommunications such as SONET / SDH / DWDM / FEC / SERDES / OC-3 thru OC-192
Wireless base stations / WLAN / Gigabit Ethernet
Avionic flight controls and military communications
Test Equipment and Instrumentation
Ordering Information:
Part Number Example:
M210
0
6
8
B
P
N
622.080000MHz
Part Number Example: M210068BPN – 622.080000 MHz
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see
www.mtronpti.com
for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI
1-800-762-8800.
1
M210x Series
PECL/LVDS/CML Clock Oscillator – 3.3/2.5/1.8 Volt – 5x7/9x14 mm
Applications Note:
The MtronPTI M210x series of clock oscillators, featuring
QiK Chip
TM
technology, provides for extremely low jitter of 0.30 ps RMS.
For applications requiring low jitter, frequencies from 150 MHz to 1.4 GHz are available. LVPECL, LVDS, or CML compatible
outputs, as well as operating voltage of 1.8 V, 2.5 V, and 3.3 V are also options on the M210x.
The M210x is available at a stability of ± 20 ppm, all-inclusive, over the industrial operating temperature range of -40°C to +85°C.
By providing this specification, the M210x will perform at a much superior level than SAW based oscillator designs (Figure 1). This
level of performance is achieved by utilizing a precision AT-cut crystal. An enable/disable function is also an available option on
the M210x. The internal 0.01 µF by-pass capacitor also assures optimum noise suppression on the supply voltage pad.
The superior integrated jitter performance of 0.3 pS RMS makes the M210x suitable for 10 Gig-E, broadband networks, network
switches, SONET, SDH, SERDES, DWDM, FEC, WLAN, and OC-3 thru OC-192 systems. The M210x is available in a nine-pad,
5x7x1.9 mm, leadless, ceramic, surface mount package (see page 4) that is RoHS and 260°C reflow compatible. (No PCB traces
should be located directly under the 5x7 product). A six-J-lead, 9x14 mm, ceramic, surface mount package, that is RoHS and
260°C reflow compatible, is also available (see page 4). Figures 2 and 3 below show load termination conditions for LVPECL and
LVDS. The M210x oscillators offer a pin 1 tristate for backward compatibility to many of the existing products in the industry from
Vectron, Epson, and others.
For superior performance in a high frequency clock oscillator, the M210x is a logical choice for designers. The unique design
architecture allows the M210x fast turn around on engineering design samples, as well as production quantities in 2 weeks or less.
Figure 1. Frequency/Temperature Curves, M210x vs. SAW Based Oscillator Devices
Figure 2. 3.3V LVPECL Load Circuit
Figure 3. LVDS Load Circuit
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see
www.mtronpti.com
for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI
1-800-762-8800.
2
M210x Series
PECL/LVDS/CML Clock Oscillator – 3.3/2.5/1.8 Volt – 5x7/9x14 mm
Performance Characteristics:
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see
www.mtronpti.com
for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI
1-800-762-8800.
3
M210x Series
PECL/LVDS/CML Clock Oscillator – 3.3/2.5/1.8 Volt – 5x7/9x14 mm
Product Dimensions & Pinout Information:
5x7 mm (N) Package
9x14 mm (J) Package
Handling Information:
Although protection circuitry has been designed into the M210x oscillator, proper precautions should be taken to
avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body
model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation.
ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industry-wide
standard has been adopted for the CDM, a standard HBM (resistance = 1500
Ω
, capacitance = 100 pF) is widely used
and therefore can be used for comparison purposes. The HBM ESD threshold presented here was obtained using
these circuit parameters.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see
www.mtronpti.com
for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI
[i=s] This post was last edited by Mai Tu Shu Sheng on 2018-12-19 11:40 [/i] I recently saw an article about Johnson noise, which mentioned that the noise bandwidth of the RC circuit is 1/(4RC). I was...
[i=s]This post was last edited by Shenzhen Xiaohua on 2021-7-31 19:47[/i]When I posted a message just now, as soon as I selected the invitees and clicked the Save button, an error message appeared
Dis...
[flash]http://player.youku.com/player.php/sid/XMTM3ODYzNTk2/v.swf[/flash] I don’t know what liquid they poured into the magnet to change its magnetic poles....
In-depth technical training on battery management : https://training.eeworld.com.cn/course/5288This on-demand training provides practical recommendations to select the right charger for IP camera. It ...
#define ADDR_NORMAL_DATA *(volatile Uint32 *)0xA0200014 The parameter addr passed to the function is RD_ADDR_KEY_0, and its macro definition is as follows: #define RD_ADDR_KEY_0 1 int RDNormal(unsigne...
When developing single-chip microcomputer programs, many people rely on emulators. Once they leave the emulator, they feel at a loss. In fact, for FLASH memory single-chip microcomputers, programs can...
In 2017,
Sanan Optoelectronics
achieved sales revenue of 8.394 billion yuan, operating profit of 3.856 billion yuan, and net profit attributable to shareholders of the parent company of 3.1...[Details]
In our common sense, the word technology often has two definitions. The first is the technology sealed in the laboratory. They are like flowers on the mountain top. Only a few people on the mountai...[Details]
China Energy Storage Network News:
According to reports, in order to reduce carbon emissions, a group of Japanese technology and energy companies are launching a pilot project that aims to al...[Details]
1. Test conditions Hardware: STM32L432KC Main frequency: 80MHz Compiler: IAR 8.20.1 Compiler options: High Speed no size constraints CRC generator polynomial: 0x782f 2. Test Method The softwar...[Details]
For STM32, there are two ways to reset the software: 1) Use the official software library The system reset function is directly provided in the stm32f10x_nvic.c file of the official software li...[Details]
I have always wanted to write some posts and blogs, but I just couldn't bear to do it as I just graduated. After some preparation, I decided to write down some of the things I learned in the past few...[Details]
Time flies. Since the beginning of 2018, news related to home appliance companies have repeatedly made headlines, and competition in the home appliance market continues to intensify. In order to be...[Details]
Although it is early summer, the Chinese smartphone market is still in the cold winter, just like Beijing in April with snow. For mobile phone brands caught in the middle, the cold is even more bit...[Details]
In most countries, the military is a fairly large group, and the health of soldiers is particularly important to the combat effectiveness of the army. The US Department of Defense's Advanced Resear...[Details]
The application of millimeter wave technology in mobile communications also involves a series of technical problems, including the large propagation loss of millimeter waves and the susceptibility ...[Details]
This example is mainly to familiarize yourself with the register configuration of Timer A and the configuration method of IAR. /*********************************************** Program function: re...[Details]
From small households to large enterprises, energy consumption has always been a concern for everyone. The energy consumption of Chinese enterprises has always been high, and the country has also wor...[Details]
As the brain of a mobile phone, the mobile phone processing chip is of great importance. Xiaomi, which started out as the MIUI company, has long been keenly aware of the gap between China and devel...[Details]
On May 8,
Google
I/O 2018 Developer Conference was held as scheduled in Mountain View, California. In the second year of the full promotion of the "AI first" strategy, artificial intelligen...[Details]
I have been working on a stm32 project recently and have been struggling with its startup method. I saw a good article and reposted it. The format of the original article is not very good, and there...[Details]