Some microcontrollers are powered by 1AA or 2AA batteries. In order to ensure that the working voltage of the microcontroller is between 2.5 and 5.0, a DC-DC boost circuit is needed. The boost circuit...
Group buying of real6410 development boards. Our group buying activities have been going on since the beginning of the year, but due to problems with supply and netizens' preferences, they have never ...
Due to cost constraints, the cost of CCD chips needs to be controlled within 100 yuan. We haven't found a suitable one yet (needs to be above 60fps). Now I have a stupid idea, but I don't know if it c...
Following the last USB debugging, this time I want to try the touch button, and then send the key value to the host through the USB port. Data captured by USB:Code for the test part:The principle of t...
The above picture is the optocoupler input circuit that I often use. I have never studied it before.
Question 1: What is the purpose of the 300 ohm resistor R2 in the circuit?
Question 2: After the sw...
I recently looked at the arm7 code and saw the interrupt function void _irq IRQ_Expection(void). What I want to ask is what is this "_irq"? ? ? ? Has it been defined before? ? ? ?...
introduction
Since the beginning of the 21st century, the world of information has changed rapidly. Maybe a high-tech product will be released today and a better similar product will be releas...[Details]
introduction
my country has a vast territory and a large population. The scale of housing construction is huge, and the amount of residential construction is large and wide. It is still on t...[Details]
Remote keyless entry (RKE) systems have become popular with users, with more than 80% of new cars in North America and more than 70% in Europe equipped with RKE systems. In addition to the obvious ...[Details]
We know that microcontroller development tools generally include real-time online emulators and programmers. Among them, online emulators are very good tools, but they are also more expensive...[Details]
1. Overview
The Virtual CAN Interface (VCI) function library is an application program interface specifically provided for the use of ZLGCAN devices on PCs. The functions in the library ar...[Details]
1. Project Introduction
Shandong Dezhou Xingtai Paper Co., Ltd. is a newly built high-end paperboard production enterprise with domestic leading level established by Shandong Zhaodongfang Pape...[Details]
Distributed Wireless Communication System (DWCS) uses distributed antennas, distributed processing control, joint signal processing and other technologies to improve the system's spectrum efficie...[Details]
introduction
LEDs continue to gain popularity in automotive applications, thanks to their long lifespan and the flexibility they offer for body styling and interior design. Some may be surpris...[Details]
For battery-powered portable devices, in addition to breaking through the limitations of processing power, the performance of portable system power supplies also needs to be continuously improved. ...[Details]
1 Load Regulation
Changes in power supply load will cause changes in power supply output. When the load increases, the output decreases, and vice versa, when the load decreases, the output inc...[Details]
The power consumption of a switching power supply includes fixed losses caused by parasitic resistances such as semiconductor switches, magnetic components, and wiring, as well as switching losses ...[Details]
In recent years, with the increasing maturity of LED technology, LED light sources have been increasingly widely used due to their advantages of using low-voltage power supply, low energy consumpti...[Details]
Features
POE technology can ensure the safety of existing structured cabling while ensuring the normal operation of the existing network and minimizing costs. The IEEE 802.3af standard is ...[Details]
1 Introduction
At present, advocating health has become the focus of people's attention, and the emergence of treadmills has become more and more popular. People can exercise at home or in the ...[Details]
The principles to be followed are as follows:
(1) In terms of component layout, related components should be placed as close as possible. For example, clock generators, crystal oscillat...[Details]