Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■
Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incor-
porating such products, which are caused under the conditions other than those specified in this catalog or indi-
vidual specification.
■
Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification
is available.
■
Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■
All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in ad-
vance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■
The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called
“TAIYO
YUDEN’ official sales channel”
s
).
It is only applicable to the products purchased from any of TAIYO YUDEN’ official sales channel.
s
■
Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may
occur in connection with a third party's intellectual property rights and other related rights arising from your usage
of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights.
■
Caution for export
Certain items in this catalog may require specific procedures for export according to
“Foreign
Exchange and For-
eign Trade Control Law”of Japan,
“U.S.
Export Administration Regulations” and other applicable regulations.
,
Should you have any question or inquiry on this matter, please contact our sales staff.
1
4
THIN FILM TYPE POLYACENE CAPACITORS
Manual Soldering
■
FEATURES
◦
olyacene Capacitors can store a large number of ions into its
P
amorphous structure (doping), therefore Polyacene Capacitors has
much larger capacitance than conventional electric double layer
capacitors.
◦
uick-charge with ampere measure is possible with its Low internal
Q
resistance.
◦
o s s i b l e to c h a r g e /d i s c h a r g e m o r e t h a n 100,000 t i m e s w i t h
P
less deterioration caused by charging/discharging compared to
secondary battery which involves chemical reaction, and that enables
to more than 100,000 times charge/discharge and large excellence of
durability for over charge/discharge.
◦
olyacene Capacitors is environmentally friendly power source, which
P
does not contain any heavy metals such as Cd,Hg and Pb. (RoHS
compliant)
■
APPLICATIONS
◦
ack-up power source for CPU, microcomputer, and flash memory writing
B
when shutting off the power.
◦
oad change leveling (life lengthening of main power source such as
L
dry battery, Lithium primary battery)
◦
ower source storage combined with solar cell, fuel cell, generator,
P
and so on.
◦
ain power source for small devices
M
(Measuring equipments, toys and so on).
◦
eak Ccurrent Assist for LED Flash.
P
■
ORDERING CODE
P
PAS
A
❶
S
2
❷
0
2
❸
6
❸Dimensions/
L [mm]
26
26.0
F
❹
FR
R
2
R
❺
5
5
0
❻
504
4
0.5F
ENERGY DEVICES SUPER CAPACITORS
❶Type
Polyacene Capacitors
❷Dimensions/
W [mm]
20
20.0
❹Shape
Thin Film Type
❺Maximum
Usable
Voltage
〔V〕
2R5
2.5
※R=decimal
point
❻Nominal
Capacitance
〔F〕
■
EXTERNAL DIMENSIONS
＋Treminal
■
PART NUMBERS
Part Number
Maximum Usable Voltage V） Nominal Capacitance F）
（
（
PAS2026FR2R5504
2.5
0.5
Internal Resistance
（mΩ）
55
（
＋
20±1.0
8±1.0
−
■
SPECIFICATIONS
Part Number
PAS2026FR2R5504
1.2
3±0.5
3±0.1
Sn plating
Terminal detail part
t=0.15
−Treminal
26±1.0
PAS2026FR2R5504
：
0.9±0.1
PAS2026FR2R7504
：
1.0±0.1
33±1.0
6
Polarity print surface
Sealing part
t=0.25
t=0.15
Operation Temp. Range
（℃）
－25½＋60
Max. Usable Voltage
（V）
2.5
Initial Capactitance
（F）
0.5±20%
Initial Internal Resistance (mΩ）
55
）
Part Number
PAS2026FR2R5504
W
20.0
L
26.0
T
0.9
Unit : mm
■
RELIABILITY DATA
Items
1. Operating Temperature range
2. Max. Usable Voltage
3. Floating Charge Characteristics
Specifications
PAS2026FR2R5504
－25½＋60℃
2.5V
Capacitance F） 0.28½ 0.6
（ ：
Internal Resistance mΩ） Under 120
（
：
Appearance：No leakage/Thickness within 1.1mm
Capacitance F）
（ ：0.28½0.6
Internal Resistance mΩ） Under 120
（
：
Appearance：No leakage/Thickness within 1.1mm
Capacitance F） 0.4½ 0.6
（ ：
Internal Resistance mΩ）
（
：Under
96
Appearance
：No
leakage/Thickness within 1.1mm
Capacitance F） 0.4½ 0.6
（ ：
Internal Resistance mΩ） Under 96
（
：
Appearance
：No
leakage/Thickness within 1mm
Capacitance : Within 0.4½0.6F
Internal Resistance
: Within 2 times of initial spec.
Appearance : No leakage/Thickness within 1.1mm
Test Conditions, Remark
Apply the max. Usable voltage to the capacitors for 500hours at max. operat-
ing temp. and measure the floating charge characteristics after returning to
normal temperature and humidity.
Temperature：25±5℃
Charge/Discharge Cycle：10,000times
Cycle Condition
Charge：max. Usable voltage 5sec MAX 1A
Discharge：c1A (Cutoff 1.5V)
Leave in the atmosphere of max. operating temp.
±2℃
and
－25℃±2℃
for 96
hours each and return to normal temp. and pressure.
Leave in the atmosphere of temp. 40±2℃ humidity 90½95％RH for 500h and
return to normal temperature.
Manual Soldering : Heating condition : After 380
℃×5sec×2times,
return to
normal temp. and pressure.
4. Charge/Discharge Cycle
Characteristics
5. Thermal Durability
6. Humidity Durability
7. Solder Heat Resistance
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
1
4
145
THIN FILM TYPE PAS CAPACITOR
■RELIABILITY
DATA
1. Operating Temperature range
Specified Value
－25½＋60℃
2. Max. Usable Voltage
Specified Value
2.5V
3. Floating Charge Characteristics
Specified Value
Test Methods and
Remarks
Capacitance（F）
Internal Resistance（mΩ）
Appearance
： 0.28½ 0.6
： Under 120
：No leakage/Thickness within 1.1mm
Apply the max. Usable voltage to the capacitors for 500hours at max. operating temp. and measure the floating charge characteristics after
returning to normal temperature and humidity.
4. Charge/Discharge Cycle Characteristics
Specified Value
Capacitance（F）
Internal Resistance（mΩ）
Appearance
Temperature
Charge/Discharge Cycle
Cycle Condition
Charge
Discharge
：0.28½0.6
： Under 120
：No leakage/Thickness within 1.1mm
：25±5℃
：10,000times
：2.5V-5sec MAX 1A
：c1A (Cutoff 1.5V)
Test Methods and
Remarks
5. Thermal Durability
Specified Value
Test Methods and
Remarks
Capacitance（F）
Internal Resistance（mΩ）
Appearance
: 0.4½ 0.6
: Under 96
: No leakage/Thickness within 1.1mm
Leave in the atmosphere of 60±2℃ and －25℃±2℃ for 96 hours each and return to normal temp. and pressure.
6. Humidity Durability
Specified Value
Test Methods and
Remarks
Capacitance（F）
Internal Resistance（mΩ）
Appearance
: 0.4½ 0.6
: Under 96
: No leakage/Thickness within 1mm
Leave in the atmosphere of temp. 40±2 ℃ humidity 90½95 ％RH for 500h and return to normal temperature.
7. Solder Heat Resistance
Specified Value
Test Methods and
Remarks
Capacitance
Internal Resistance
Appearance
: Within 0.4½0.6F
: Within 2 times of initial spec.
: No leakage/Thickness within 1.1mm
Manual Soldering : Heating condition : After 380 ℃ ×10sec×2times, return to normal temp. and pressure.
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_pas_thinfilm_reli_e-E02R01
THIN FILM TYPE PAS CAPACITOR
■PRECAUTIONS
1. Use under the maximum usable voltage.
When voltage which exceed the maximum usable voltage is applied, it might cause abnormal current flow, which shorten lifetime, and leakage, and sometimes
damages PAS capacitors.
2. Use under maximum operating temperature.
A capacitor using in over max operating temperature may lead to shorter life, leakage, and electrical damage by increasing internal pressure.
3. Limited life time.
Lifetime of PAS capacitor is greatly affected by surrounding temperature. 10℃ drop in temperature extends its expected lifetime approximately twice as
much.
Design a circuit under consideration of deterioration of electrical characteristics after long time usage, decreasing in capacitance and increasing in internal
resistance.
4. PAS capacitor's electrical characteristics might change depending on the surrounding temperature.
PAS Capacitor’s electrical characteristics might change depending on the surrounding temperature aside from aged deterioration.
Therefore, be sure to confirm the temperature performance before use product.
5. PAS capacitor has polarity.
PAS capacitor has polarity. Please check the polarity before use.
If a reverse voltage is applied, causing damage to the product.
6. Mind voltage drop when back-up.
When back-up (discharging) starts, voltage will drop because of active current and internal resistance.
7. Environment of usage.
In case PAS capacitor is used in high humidity, alkaline or acid air, it may cause deteriorating of its performance and short circuit by corrosion of outer can
or lead terminal. In addition, used in sudden temperature change or high humidity, it may cause deteriorating of its performance and electrolyte leak by dew
condensation.
8. Don’t apply shock and vibration or pressure.
PAS capacitor is sensitive to shock. Don’t drop PAS capacitor and not apply strong pressure to a body, terminals and lead. Soldering part or lead terminal
might be damaged if applying vibration, shock and stress such as pinch, tip, push and twist after installed.
9. Soldering
If next each item is not minded, it may cause deteriorating of its performance, leakage, shortening lifetime.
Don’t solder over solder conditions in the spec. sheet.
10. Cleaning condition when cleaning circuit-board after soldering.
Cleaning may affect PAS capacitor. Consult us about cleaning conditions beforehand.
Some cleaning conditions cause detrimental influence.
11. Storage.
Keep following cautions for storage of PAS capacitor.
● Don’t store in the high temperature, the high humidity condition and a place where receiving direct sunlight. Storing PAS capacitor in the room condition
of 10℃ - 35℃ and less than 65% relative humidity is recommended. Sudden temperature change or high humidity may cause deteriorating of its
characteristics and Soldering.
● Don’t store PAS capacitor near water, salt water or oil, and it the dew condensation, gasified oil or salinity filled place.
● Don’t store PAS capacitor in the hazardous gas (hydrogen sulfide, sulfurous, chlorine , ammonia, bromine, methyl bromine and etc).
● Don’t fumigate by halogen fumigant.
● Don’t store PAS capacitor near acid or alkaline solvent.
● Don’t store PAS capacitor in a place where exposed to ozone, ultraviolet or x-ray.
● Don’t store PAS capacitor in a place where vibration and shock might occur in.
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
I want to read files in wince by memory mapping files, which will be faster. I have tried it on VC and it works. So I want to move it to wince, but now there is a problem that I can't get through Crea...
[align=left][color=rgb(51,51,51)][b]I am transferring these inventory components left over from the project: [/b][/color][/align][align=left][color=rgb(51,51,51)][b]One OMRON original brand new ZX2-LD...
When analyzing capacitor AC circuits, the analysis method of charging and discharging is very complicated and not easy to understand, so the equivalent analysis method should be used. This analysis me...
Analysis of FPGA key debounce program For those who are interested in learning FPGA, it is used in many systems and projects we do.But the data input by the key we are talking about cannot be used dir...
Microchip's PIC18F46J50 is a low-power, high-performance 8-bit USB microcontroller (MCU) using nanoWatt XLP technology. The current in deep sleep mode can be as low as 13nA, the operating voltage i...[Details]
1 Introduction
The high temperature tester is mainly used for temperature tracking measurement and data acquisition during the heating process. By systematically analyzing the test data, the...[Details]
Microcontrollers (MCUs), which are widely used in automotive electronics, are rapidly facing time and cost pressures. The main advantage of using MCUs has always been to create high-level system in...[Details]
Do you often have to add brake fluid to your car's brakes? The fact that you need to pump out the brake fluid to make sure there is no gas in the brake fluid line may not be done by the car owner h...[Details]
In recent years, the market for mobile/portable devices such as smartphones and laptops has continued to grow rapidly. While these products continue to integrate more new features to enhance the ...[Details]
1. Introduction
Light control circuit plays a vital role in urban street lamps or corridor lighting. With light control circuit, the lights can be automatically turned on and off according to ...[Details]
For a long time, due to the limitation of hardware conditions, the display devices of traditional small handheld devices such as PDA are usually monochrome LCD, and the user interface is very simpl...[Details]
Two simple circuits are implemented to drive two LEDs from a battery powered microprocessor.
This design is based on a circuit that uses three resistors and a microprocessor I/O pin as an input h...[Details]
With the continuous improvement of the requirements of intelligent building security systems and the continuous improvement of people's safety awareness, indoor anti-theft has gradually attracted peop...[Details]
Instrument stepper motor
The stepper motor is an open-loop control element that converts electrical pulse signals into angular displacement or linear displacement. In the case of non...[Details]
Microcalorimetry
is used to determine energy relationships. Microcalorimetry techniques are often required when performing calorimetric experiments with small sample sizes or slow heating rat...[Details]
Vertical cavity surface emitting lasers (VCSELs) are gradually replacing traditional edge emitting lasers, especially in low bandwidth and short-distance communication systems where cost factors ar...[Details]
Smart lighting control systems provide high controllability for various buildings and further enhance the level of green energy. They are the core products of energy conservation and digital techn...[Details]
With the continuous consumption of earth's energy and the scarcity of resources, the harm of greenhouse effect to human beings, and the serious pollution of the atmosphere to the earth, the intern...[Details]
The traditional display screen using 51 single-chip microcomputer to control LED dot matrix has relatively simple functions. If it is to achieve diversified functions, it often takes a lot of time ...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
