-
On April 17, the U.S. Department of Commerce suddenly announced that it would completely ban U.S. companies from
selling parts, goods, software and technology
to
ZTE
within 7 years. This als...[Details]
-
1. Development Environment 1. Applicable chips: All STM32F4 chips 2. Firmware library: STM32F4xx_DSP_StdPeriph_Lib_V1.8.0 3，IDE：MDK517 2. Driver source code Delay.h File /**...[Details]
-
1. Photovoltaic inverter installation process
1. Preparation before installation
Are the product accessories, installation tools and parts complete? Is the installation environmen...[Details]
-
LAN8720 configuration: IP: 192.168.192.30 Gateway: 192.168.192.1 A high frequency of ARP packets is detected The content of the packet asks for the mac address of 192.168.192.1, and asks the resp...[Details]
-
In the project, CPLD is needed to complete part of the algorithm design. The parameters are given by AVR, so the communication between AVR and CPLD needs to be completed. Therefore, a test program is...[Details]
-
I believe that many netizens who have watched "Interstellar" will remember this classic line, "Do not go gentle into this good night, nor let passion be drowned by the gloom of twilight". Different...[Details]
-
Using the WWDG of STM32F030, it is found that the MCU will not be reset under STOP, just like the sleep mode of STM8S. Paste the watchdog code: /******************************************************...[Details]
-
The independent watchdog of STM32 is driven by a dedicated internal 40Khz low-speed clock, that is, it is still effective even if the main clock fails. Here we need to note that the clock of the inde...[Details]
-
1. A/D (Analog-to-Digital) and D/A (Digital-to-Analog) Conversion 1. Pin AOUT: Analog output Vref: reference voltage AGND: Analog ground EXT: Ground OSC: Floating SCL，SDA：IIC AIN0, AIN1, AIN2: anal...[Details]
-
#include "MSP430x24x.h" void main(void) { // Stop watchdog timer to prevent time out reset WDTCTL = WDTPW + WDTHOLD; //Watchdog P4DIR = BIT0|BIT1|BIT2|BIT3; //Set to outpu...[Details]
-
/********************************************************************** ** ** File : EEPROM.c | Eeprom write and read | ...[Details]
-
The isp made a brief summary. Through online programming (the chip is programmed by continuously resetting the chip while the high voltage is converted), the MCU's flash, eeprom, fuse bits, encryptio...[Details]
-
In one of my products, there are two chips, AVR and PIC, at the same time. When AVR drives the relay, then drives the contactor. PIC is used for display. I found that PIC actually has a little interf...[Details]
-
// 1. Use ICCAVR's terminal debugging window (Terminal) to debug communication. // 2. Set ICCAVR's terminal debugging window and set the serial port to com1 or com2 // The communication baud rat...[Details]
-
/*34864 Chinese character library*/ // Connection of MCU //******************************************************** //p3= data port //p4--control port// p4.0 = rs //p4.1= r/w //p4.2= e //...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
