XM2S-E

1. Development Environment       1. Applicable chips: All STM32F4 chips       2. Firmware library: STM32F4xx_DSP_StdPeriph_Lib_V1.8.0       3，IDE：MDK517 2. Driver source code       Delay.h File /**...[Details]

The trade war between China and the United States has become the focus. The United States has begun to play the ban card against Chinese technology companies. The ZTE incident shows that if the ban...[Details]

Chip: STM32F107VCT6 Application Pin: THOUSANDS, RMII STM32CubeMX is very convenient to use ETH. The software comes with LWIP and configuration. This time, STM32F107VCT6+DP83848CVV is used. The MII a...[Details]

In the development of artificial intelligence, talent reserve is undoubtedly an important part. Artificial intelligence should be a bottom-level technology that can be deeply embedded in any indust...[Details]

STM32 uses FSMC to read and write CPLD programs. CPLD is hung on the address line and data line of STM32. CPLD is regarded as an off-chip RAM for reading and writing. On the board I made, CPLD is hun...[Details]

sprintf is a function in the C language library that converts data types. There is a situation where In 51 MCU, define unsigned char temp; Then I want to use the serial port to print out temp in deci...[Details]

ADC Introduction:     ADC (Analog-to-Digital Converter). That is, converting analog signals into digital signals for processing. When storing or transmitting, analog-to-digital converters are almost ...[Details]

When STM32 uses JTMS (PA13) and JTCK (PA14) as normal I/O ports, add the following code before initialization (the order cannot be reversed):   RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE); G...[Details]

****************************************************************** 1. The operand is in register, R0--R7 2. Operands are in internal RAM 3. Operands are in external RAM But they are all similar. For ...[Details]

6MHz crystal oscillator, using timer counter 1, using interrupt mode, through P1.0 to make a light emitting diode turn on for 100ms, turn off for 300ms, and repeat. Assembly programming is used to ac...[Details]

International Solar Photovoltaic Network News: On November 21, Australia's SMA Solar Technology Co., Ltd. signed a contract with the local government to provide photovoltaic inverters with an insta...[Details]

#include  MSP430x12x2.h   #define TEM_ADC_CHL 0x0a  void InitSys(void);  void Read_ADC(unsigned int INCH_channel);  void ADC_TO_TEM(void); unsigned int ADC_sample_val;  unsigned int long temp1,temp2;...[Details]

Program for MSP430 controller LCD SED1335 //------------------------------------------------------------  //------------------------------------------------------------  #define WC_ADD XBYTE   #defi...[Details]

MSP430 uses ADC10 to measure the voltage of the temperature diode inside the chip #include "msp430x22x4.h"  //This program uses ADC10 to measure the voltage of the temperature diode inside the chip  ...[Details]

#include "MSP430x22x4.h"   #define uchar unsigned char  #define uint  unsigned int  #define comm  0  #define dat   1  #define sclk_1 P4OUT|=0x01 //sclk=1; 001----p4.0  #define sclk_0 P4OUT&=0x06 //sc...[Details]